ATV320U55M3C Schneider Electric Industrial Automation Components

Product Details

• Brake Chopper Integrated
  True
• Power Dissipation In W
  Fan 242.0 W 200 V 4 kHz
• With Safety Function Safe Torque Off (STO)
  True
• Format Of The Drive
  Compact
• Discrete Output Number
  3
• Method Of Access
  Slave CANopen
• Discrete Input Number
  7
• Analogue Input Number
  3
• Maximum Output Frequency
  0.599 kHz
• Maximum Input Current Per Phase
  35.4 A
• Mounting Mode
  Wall mount
• [Us] Rated Supply Voltage
  200...240 V - 15...10 %
• Prospective Line Isc
  22 kA
• With Sft Fct Safe Stop 2 (SS2)
  False
• Minimum Switching Current
  Relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
• Nominal Switching Frequency
  4 kHz
• Maximum Output Voltage
  240 V
• Base Load Current At High Overload
  27.5 A
• Product Specific Application
  Complex machines
• Motor Power Kw
  5.5 kW heavy duty
4 Quadrant Operation Possible
True
Braking To Standstill
By DC injection
Range Of Product
Altivar Machine ATV320
IP Degree Of Protection
IP20
With Safety Function Safe Position (SP)
False
With Safety Function Safe Stop 1 (SS1)
True
Product Or Component Type
Variable speed drive
Transient Overtorque
170…200 % of nominal motor torque
EMC Filter
Without EMC filter
Nominal Output Current
27.5 A
Network Frequency
50-60 Hz
Height
9.13 in (232.0 mm)
Variant
Standard version
With Safety Function Safe Operating Stop (SOS)
False
Analogue Output Number
1
Synchronous Motor Control Profile
Vector control without sensor
Apparent Power
12.4 kVA 240 V heavy duty)
Relative Symmetric Network Frequency Tolerance
5 %
With Safety Function Safely Limited Speed (SLS)
True
With Safety Function Safe Brake Management (SBC/SBT)
False
With Safety Function Safe Programmable Logic
False
With Safety Function Safely Limited Position (SLP)
False
With Safety Function Safe Direction (SDI)
False
Width
5.91 in (150 mm)
Depth
7.01 in (178.0 mm)
With Safety Function Safe Speed Monitor (SSM)
False
Net Weight
7.72 lb(US) (3.5 kg)
Switching Frequency
2...16 kHz adjustable 4...16 kHz with derating factor
Line Current
35.4 A 200 V heavy duty) 29.8 A 240 V heavy duty)
Discrete Output Type
Open collector DQ+ 0…1 kHz 30 V DC 100 mA Open collector DQ- 0…1 kHz 30 V DC 100 mA
Analogue Output Type
Software-configurable current AQ1 0...20 mA 800 Ohm 10 bits Software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Discrete Input Logic
Positive logic (source) Negative logic (sink)
Communication Port Protocol
Modbus serial CANopen
Discrete Input Type
STO safe torque off, 24 V DC1.5 kOhm DI1...DI6 logic inputs, 24 V DC 30 V) DI5 programmable as pulse input 0…30 kHz, 24 V DC 30 V)
Motor Slip Compensation
Automatic whatever the load Adjustable 0...300 % Not available in voltage/frequency ratio (2 or 5 points)
Analogue Input Type
AI1 voltage 0...10 V DC 30 kOhm 10 bits AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Maximum Switching Current
Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1A, R1B, R1C, R2A, R2
Asynchronous Motor Control Profile
Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor - Energy Saving Voltage/frequency ratio, 2 points
Relay Output Type
Configurable relay logic R1A 1 NO 100000 cycles Configurable relay logic R1B 1 NC 100000 cycles Configurable relay logic R1C Configurable relay logic R2A 1 NO 100000 cycles Configurable relay logic R2C
Protection Type
Input phase breaks drive Overcurrent between output phases and earth drive Overheating protection drive Short-circuit between motor phases drive Thermal protection drive
Option Card
communication module, CANopen communication module, EtherCAT communication module, Profibus DP V1 communication module, Profinet communication module, Ethernet Powerlink communication module, EtherNet/IP communication m
Acceleration And Deceleration Ramps
Linear U S CUS Ramp switching Acceleration/deceleration ramp adaptation Acceleration/deceleration automatic stop with DC injection