ATV71HU15M3Z Schneider Electric Variable Frequency Drives (VFD)

Out if stock but available for backorder.

Schneider Electric ATV71HU15M3Z is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 71 series. It features variable speed/frequency drive capabilities with U/F ratio (2 points / 5 points), sensorless flux vector control, ENA System, and vector control with or without speed feedback. It can deliver 220% of the nominal motor torque for 2 seconds and 170% of the nominal motor torque for 60 seconds. The design includes a built-in EMC filter, a non-detachable display, and a built-in heatsink. It operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.) and has dimensions of H230mm x W130mm x D175mm. The degree of protection is IP20, IP21, UL type 1. The rated current is 8A (230Vac; 4kHz; 3-phase), 4.8A (230Vac; 4kHz; single-phase), with maximum currents of 7.9A (single-phase; for 2s), 13.2A (3-phase; for 2s), 7.2A (single-phase; for 60s), and 12A (3-phase; for 60s). It supports wall mounting and uses Modbus and CANopen communication protocols. It is compatible with single-phase (1P) / 3-phase (3P) networks and offers an output frequency range of 0.1-599 Hz. The device includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) programmable (LI1-LI5), 1 digital input programmable as discrete or PTC input (LI6), 1 digital input (PWR safety input), 1 digital output (C/O SPDT relay contact) (R1), and 2 digital outputs (NO relay contacts) (R2). It also features 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). The current consumption is 12A (200Vac; 0.75kW; single-phase), 9.6A (240Vac; 1.5kW; 3-phase), 9.9A (240Vac; 0.75kW; single-phase), and 11.3A (200Vac; 1.5kW; 3-phase). The rated active power is 1.5kW (3-phase) and 750W / 0.75kW (single-phase), with a rated power of 2HP (3-phase) and 1HP (single-phase).