ATV930D30M3 Schneider Electric Industrial Automation Components

Product Details

• [Us] Rated Supply Voltage
  200...240 V - 15...10 %
• Data Format
  8 bits, configurable odd, even or no parity Modbus serial
• Analogue Output Number
  2
• Product Or Component Type
  Variable speed drive
• Device Short Name
  ATV930
• Type Of Cooling
  Forced convection
• Speed Drive Output Frequency
  0.1…599 Hz
• Exchange Mode
  Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
• Analogue Input Number
  3
• Nominal Switching Frequency
  2.5 kHz
• Number Of Addresses
  1…247 Modbus serial
• EMC Filter
  Without EMC filter
• Supply Frequency
  50...60 Hz +/- 5 %
• Depth
  12.81 in (325.5 mm)
• Physical Interface
  2-wire RS 485 Modbus serial
• Transmission Frame
  RTU Modbus serial
• Discrete Output Number
  2
• Power Range
  30…50 kW 200…240 V 3 phase
• Range Of Product
  Altivar Process ATV900
• Degree Of Protection
  UL type 1 UL 508C
Mounting Mode
Wall mount
Minimum Switching Current
Relay output R1, R2, R3 5 mA 24 V DC
Phase
3 phase
Output Voltage
<= power supply voltage
Net Weight
126.99 lb(US) (57.6 kg)
Discrete Input Number
10
Device Application
Industrial Application
Prospective Line Isc
50 kA
Number Of Preset Speeds
16 preset speeds
Acceleration And Deceleration Ramps
Linear adjustable separately from 0.01...9999 s
Height
36.30 in (922 mm)
Width
11.42 in (290 mm)
Safety Function
STO (safe torque off) SIL 3
Braking To Standstill
By DC injection
Method Of Access
Slave Modbus TCP
Relay Output Number
3
Isolation
Between power and control terminals
Type Of Polarization
No impedance Modbus serial
Refresh Time
Relay output R1, R2, R3)5 ms +/- 0.5 ms)
Product Destination
Synchronous motors Asynchronous motors
Continuous Output Current
123 A 2.5 kHz normal duty 92.6 A 2.5 kHz heavy duty
Frequency Resolution
Display unit 0.1 Hz Analog input 0.012/50 Hz
Switching Frequency
1...8 kHz adjustable 2.5...8 kHz with derating factor
Linearity Error
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AQ1, AQ2 +/- 0.2 % analog output
Variant
With braking chopper Standard version
Accuracy
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Apparent Power
36.8 kVA 240 V normal duty) 27.9 kVA 240 V heavy duty)
Maximum Transient Current
147.6 A 60 s normal duty) 138.9 A 60 s heavy duty)
Analogue Input Type
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
IP Degree Of Protection
IP21 IEC 61800-5-1 IP21 IEC 60529
Synchronous Motor Control Profile
Permanent magnet motor Synchronous reluctance motor
Connector Type
2 RJ45 Ethernet IP/Modbus TCP on the control block 1 RJ45 Modbus serial on the control block
Maximum Horse Power Rating
40 hp normal duty 30 hp heavy duty
Transmission Rate
10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial
Motor Power Kw
30 kW normal duty) 22 kW heavy duty)
Communication Port Protocol
Modbus TCP Modbus serial EtherNet/IP
Discrete Input Type
DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
Asynchronous Motor Control Profile
Variable torque standard Optimized torque mode Constant torque standard
Discrete Output Type
Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
Analogue Output Type
Software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits Software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
Input Compatibility
DI1...DI8 discrete input level 1 PLC EN/IEC 61131-2 DI7, DI8 pulse input level 1 PLC IEC 65A-68 STOA, STOB discrete input level 1 PLC EN/IEC 61131-2
Local Signalling
Local diagnostic 3 LED mono/dual colour) Embedded communication status 5 LED dual colour) Communication module status 2 LED dual colour) Presence of voltage 1 LED red)
Motor Slip Compensation
Automatic whatever the load Adjustable Can be suppressed Not available in permanent magnet motor law
Line Current
104.7 A 200 V normal duty) 88.6 A 240 V normal duty) 78.3 A 200 V heavy duty) 67.1 A 240 V heavy duty)
Sampling Duration
2 ms +/- 0.5 ms DI1...DI8) - discrete input 5 ms +/- 1 ms DI7, DI8) - pulse input 1 ms +/- 1 ms AI1, AI2, AI3) - analog input 5 ms +/- 1 ms AQ1, AQ2) - analog output
Electrical Connection
Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side: screw terminal 70...120 mm²/AWG 1/0...250 kcmil DC bus screw terminal 70...120 mm² AWG 1/0...250 kcmil Motor screw terminal 70...120 mm² AWG 2/0...250 kcmil
Discrete Input Logic
Positive logic (source) DI1...DI8), < 5 V, > 11 V Negative logic (sink) DI1...DI8), > 16 V, < 10 V Positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V Positive logic (source) STOA, STOB), < 5 V, > 11 V
Relay Output Type
Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 1000000 cycles Configurable relay logic R3 sequence relay NO 1000000 cycles
Supply
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection Internal supply for di
Maximum Switching Current
Relay output R1 resistive, cos phi = 1 3 A 250 V AC Relay output R1 resistive, cos phi = 1 3 A 30 V DC Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC Relay output R2
Option Module
Slot A communication module Profibus DP V1 Slot A communication module Profinet Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication m
Protection Type
Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive
Variable Speed Drive Application Selection
Food and beverage processing Mixer Food and beverage processing Conveyor Food and beverage processing Shredder Hoisting Process crane Marine Thruster Marine Winch Material working (wood, ceramic, stone, pvc, metal) Press

ATV930D30M3 Related Documents