Powermatic Associates Logo

CA2KN223F7 Schneider Electric Industrial Automation Components

CA2KN223F7 on Powermatic Associates
Schneider Electric

Part#:CA2KN223F7

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric CA2KN223F7 is a contactor with a mechanical durability of 10,000,000 operations at no load, designed for plate DIN rail mounting. It falls under the utilisation categories AC-15 and DC-13, featuring two SPST-NO (Single Pole Single Throw - Normally Open) contacts. The type of terminals used in this part is spring, and it has an operating rate of 10,000 cycles per hour.

Product Details

  • Control Circuit Type
    AC 50/60 Hz
  • Immunity To Microbreaks
    2 ms
  • Net Weight
    0.40 lb(US) (0.18 kg)
  • Inrush Power In VA
    30 VA 68 °F (20 °C))
  • Pole Contact Composition
    2 NO + 2 NC
  • Heat Dissipation
    1.3 W
  • Depth
    2.24 in (57 mm)
  • Irms Rated Making Capacity
    110 A IEC 60947
  • Hold-In Power Consumption In VA
    4.5 VA 68 °F (20 °C))
  • Product Name
    TeSys CAK
  • Device Short Name
    CA2K
  • Mechanical Durability
    10 Mcycles
  • Height
    2.28 in (58 mm)
  • Range
    TeSys
  • [Ith] Conventional Free Air Thermal Current
    10 A 122 °F (50 °C)
  • Minimum Switching Current
    5 mA
  • Contactor Application
    Control circuit
  • [Uc] Control Circuit Voltage
    110 V AC 50/60 Hz
  • Maximum Operating Rate
    10000 cyc/h
  • Width
    1.77 in (45 mm)
  • Product Or Component Type
    Control relay
  • Minimum Switching Voltage
    17 V
  • Insulation Resistance
    > 10 MOhm
  • [Ue] Rated Operational Voltage
    <= 690 V <= 400 Hz
  • Non Overlap Distance
    0.02 in (0.5 mm)
  • Utilisation Category
    DC-13 AC-15
  • Mounting Support
    Rail Plate
  • Control Circuit Voltage Limits
    Drop-out 0.2...0.75 Uc 122 °F (50 °C)) Operational 0.8...1.15 Uc 122 °F (50 °C))
  • Associated Fuse Rating
    10 A gG IEC 60947 10 A gG VDE 0660
  • Connections - Terminals
    spring terminals 1 0.00…0.00 in² (0.75…1.5 mm²)solid spring terminals 1 0.00…0.00 in² (0.75…1.5 mm²)flexible without cable end
  • [Ui] Rated Insulation Voltage
    690 V IEC 60947 750 V VDE 0110 group C 690 V BS 5424 600 V CSA C22.2 No 14
  • Operating Time
    10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing 15...25 ms coil de-energisation and NC closing 5...15 ms coil energisation and NC opening

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of CA2KN223F7 on Powermatic Associates is $71.49. Order now.

CA2KN223F7 Related Documents

Instruction Sheet-1631039712511.pdfCatalog-1631039712515.pdfProduct Datasheet-1631039712512.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
BDL36070 on Powermatic Associates

BDL36070

Schneider Electric

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDL sub-range, featuring a PowerPact B-Frame 100 TMD 3P 70A design for 600Y/347Vac with a 14kA breaking capacity and 80% rated Everlink (Creep compensating) lugs on both line and load sides. It has a rated impulse voltage (Uimp) of 8 kV and offers a degree of protection of IP40. The rated current is 70A, with a rated voltage (AC) of 600Vac 600Y/347Vac. It boasts a mechanical durability of 20,000 operations at no load and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) circuit breaker has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It falls under utilisation category A and features over-current protection fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 70 AT and an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mechanism. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

0 in stock
MFI1PRL17N4 on Powermatic Associates

MFI1PRL17N4

Schneider Electric

MForce MicroDrive Plus,MotCtl,48v

5 in stock
LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

1 in stock

Manufacturer warranty

CA2KN223F7 Schneider Electric

$71.49

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$71.49

$71.49 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare CA2KN223F7 with other Industrial Automation Components products

Control Circuit Type

Immunity To Microbreaks

Net Weight

Inrush Power In VA

Pole Contact Composition

Heat Dissipation

Depth

Irms Rated Making Capacit...

Hold-In Power Consumption...

Product Name

Selected product

CA2KN223F7
Backordered
CA2KN223F7
Schneider Electric

Schneider Electric CA2KN223F7 is a contactor with a mechanical durability of 10,000,000 operations a...

Control Circuit TypeAC 50/60 Hz

Immunity To Microbreaks2 ms

Net Weight0.40 lb(US) (0.18 kg)

Inrush Power In VA30 VA 68 °F (20 °C))

Pole Contact Composition2 NO + 2 NC

Heat Dissipation1.3 W

Depth2.24 in (57 mm)

Irms Rated Making Capacity110 A IEC 60947

Hold-In Power Consumption In VA4.5 VA 68 °F (20 °C))

Product NameTeSys CAK

LC1D95M7
1 in stock
LC1D95M7
Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connect...

Control Circuit TypeAC 50/60 Hz

Immunity To Microbreaks-

Net Weight-

Inrush Power In VA-

Pole Contact Composition-

Heat Dissipation-

Depth-

Irms Rated Making Capacity1100 A 440 V AC power circui...

Hold-In Power Consumption In VA-

Product NameTeSys D

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

Control Circuit TypeDC standard

Immunity To Microbreaks-

Net Weight-

Inrush Power In VA-

Pole Contact Composition-

Heat Dissipation-

Depth-

Irms Rated Making Capacity140 A AC signalling circuit ...

Hold-In Power Consumption In VA-

Product NameTeSys D

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

FAQ

What is the price of CA2KN223F7?
Purchase the CA2KN223F7 from Powermatic Associates at the price of $71.49. Order today.

Out if stock but available for backorder.

Schneider Electric CA2KN223F7 is a contactor with a mechanical durability of 10,000,000 operations at no load, designed for plate DIN rail mounting. It falls under the utilisation categories AC-15 and DC-13, featuring two SPST-NO (Single Pole Single Throw - Normally Open) contacts. The type of terminals used in this part is spring, and it has an operating rate of 10,000 cycles per hour.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

1 in stock