LC1D25FE7 Schneider Electric Industrial Automation Components


Part#:LC1D25FE7
Manufacturer:Schneider Electric
Category:Industrial Automation Components
Product Lifecycle:Active
Product description
Schneider Electric LC1D25FE7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 40A (AC-1) and 25A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 45 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 92-126Vac (115Vac nominal; 50Hz; 0.8...1.1 x Uc) to 98-126Vac (115Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, with a contacts type of 1NO+1NC instantaneous aux. The rated impulse voltage (Uimp) is 6 kV, and the rated active power (kW) spans from 5.5kW (220-230Vac; AC-3) to 15kW (660-690Vac; AC-3). The rated power (HP) varies from 2HP (115Vac; single-phase; 50Hz/60Hz; UL/CSA) to 20HP (575-600Vac; 3-phase; 50Hz/60Hz; UL/CSA). This contactor is designed for mechanical durability of 15,000,000 operations and electrical durability of 1,600,000 operations with load, supporting a phase-to-phase rated voltage (AC) of 690 V.
Product Details
- Overvoltage Category III
- Control Circuit Type AC 50/60 Hz
- Power Pole Contact Composition 3 NO
- Poles Description 3P
- Auxiliary Contact Composition 1 NO + 1 NC
- Front Cover With
- Device Short Name LC1D
- [Uimp] Rated Impulse Withstand Voltage 6 kV IEC 60947
- Mechanical Durability 15 Mcycles
- Minimum Switching Current 5 mA signalling circuit
- Product Or Component Type Contactor
- Product Name TeSys D
- Range TeSys
- Maximum Operating Rate 3600 cyc/h 140 °F (60 °C)
- Insulation Resistance > 10 MOhm signalling circuit
- Rated Breaking Capacity 450 A 440 V power circuit IEC 60947
- Heat Dissipation 2…3 W 50/60 Hz
- Signalling Circuit Frequency 25...400 Hz
- Minimum Switching Voltage 17 V signalling circuit
- [Uc] Control Circuit Voltage 115 V AC 50/60 Hz
- Average Impedance 2 mOhm - Ith 40 A 50 Hz power circuit
- Coil Technology Without built-in suppressor module
- Mounting Support Plate Rail
- [Ue] Rated Operational Voltage Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
- Auxiliary Contacts Type Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
- Non-Overlap Time 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
- Operating Time 12...22 ms closing 4...19 ms opening
- Inrush Power In VA 70 VA 60 Hz 0.75 68 °F (20 °C)) 70 VA 50 Hz 0.75 68 °F (20 °C))
- Electrical Durability 1.65 Mcycles 25 A AC-3 <= 440 V 1.4 Mcycles 40 A AC-1 <= 440 V
- Power Dissipation Per Pole 3.2 W AC-1 1.25 W AC-3
- Hold-In Power Consumption In VA 7.5 VA 60 Hz 0.3 68 °F (20 °C)) 7 VA 50 Hz 0.3 68 °F (20 °C))
- Safety Reliability Level B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- [Ith] Conventional Free Air Thermal Current 10 A 140 °F (60 °C) signalling circuit 40 A 140 °F (60 °C) power circuit
- Contactor Application Motor control Resistive load
- [Ie] Rated Operational Current 25 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit 40 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
- Connections - Terminals Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)fl
- Associated Fuse Rating 10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 40 A gG <= 690 V type 2 power circuit
- Utilisation Category AC-3 AC-1 AC-4
- Irms Rated Making Capacity 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 450 A 440 V power circuit IEC 60947
- Control Circuit Voltage Limits 0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
- Tightening Torque Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 22.13 lbf.in (2.5 N.m) screw clamp terminals flat Ø 6 mm Power circuit 22.13 lb
- Motor Power HP (UL / CSA) 3 hp 230/240 V at AC 50/60 Hz for 1 phase 2 hp 115 V at AC 50/60 Hz for 1 phase 7.5 hp 230/240 V at AC 50/60 Hz for 3 phase 15 hp 460/480 V at AC 50/60 Hz for 3 phase 20 hp 575/600 V at AC 50/60 Hz for 3 phase 7.5 hp 200/208 V at
- [Icw] Rated Short-Time Withstand Current 240 A 104 °F (40 °C) - 10 s power circuit 380 A 104 °F (40 °C) - 1 s power circuit 50 A 104 °F (40 °C) - 10 min power circuit 120 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
- [Ui] Rated Insulation Voltage Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
- Standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
- Motor Power Kw 5.5 kW 220...230 V AC 50/60 Hz AC-3) 11 kW 380...400 V AC 50/60 Hz AC-3) 11 kW 415...440 V AC 50/60 Hz AC-3) 15 kW 500 V AC 50/60 Hz AC-3) 15 kW 660...690 V AC 50/60 Hz AC-3) 5.5 kW 400 V AC 50/60 Hz AC-4)
- Product Certifications RINA BV UL LROS (Lloyds register of shipping) DNV GL GOST CCC CSA
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D25FE7 on Powermatic Associates is $187.94. Order now.
LC1D25FE7 Related Documents
Similar products from: Schneider Electric Industrial Automation Components
Manufacturer warranty
LC1D25FE7 Schneider Electric
$187.94
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$187.94
$187.94 each
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare LC1D25FE7 with other Industrial Automation Components products
Overvoltage Category
Control Circuit Type
Power Pole Contact Compos...
Poles Description
Auxiliary Contact Composi...
Front Cover
Device Short Name
[Uimp] Rated Impulse With...
Mechanical Durability
Minimum Switching Current
Selected product

LC1D25FE7
Schneider Electric
Schneider Electric LC1D25FE7 is a magnetic contactor from the Deca sub-range, featuring screw connec...
Overvoltage CategoryIII
Control Circuit TypeAC 50/60 Hz
Power Pole Contact Composition3 NO
Poles Description3P
Auxiliary Contact Composition1 NO + 1 NC
Front CoverWith
Device Short NameLC1D
[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947
Mechanical Durability15 Mcycles
Minimum Switching Current5 mA signalling circuit
About the manufacturer
Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...
Recently viewed products
Relevant products
FAQ
What is the price of LC1D25FE7?
Purchase the LC1D25FE7 from Powermatic Associates at the price of $187.94. Order today.
Out if stock but available for backorder.
Schneider Electric LC1D25FE7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 40A (AC-1) and 25A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 45 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 92-126Vac (115Vac nominal; 50Hz; 0.8...1.1 x Uc) to 98-126Vac (115Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, with a contacts type of 1NO+1NC instantaneous aux. The rated impulse voltage (Uimp) is 6 kV, and the rated active power (kW) spans from 5.5kW (220-230Vac; AC-3) to 15kW (660-690Vac; AC-3). The rated power (HP) varies from 2HP (115Vac; single-phase; 50Hz/60Hz; UL/CSA) to 20HP (575-600Vac; 3-phase; 50Hz/60Hz; UL/CSA). This contactor is designed for mechanical durability of 15,000,000 operations and electrical durability of 1,600,000 operations with load, supporting a phase-to-phase rated voltage (AC) of 690 V.
Similar products from: Industrial Automation Components
What can I help you find today?