Powermatic Associates Logo

LC1D38FE7 Schneider Electric Industrial Automation Components

LC1D38FE7 on Powermatic Associates
Schneider Electric

Part#:LC1D38FE7

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1D38FE7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 50A (AC-1) and 38A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 45 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 92-126Vac (115Vac nominal; 50Hz; 0.8...1.1 x Uc) to 98-126Vac (115Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 9kW at 220-230Vac to 18.5kW at 660-690Vac (all AC-3), and its rated power (HP) ranges from 2HP at 115Vac to 25HP at 575-600Vac, covering both single-phase and 3-phase configurations under UL/CSA standards. The mechanical durability of the LC1D38FE7 is rated at 15 million operations at no load, and its electrical durability is rated at 1.4 million operations with load. The rated voltage (AC) for phase-to-phase connections is 690 V.

Product Details

  • Product Certifications
    GL BV GOST LROS (Lloyds register of shipping) DNV CCC CSA UL RINA
  • [Icw] Rated Short-Time Withstand Current
    60 A 104 °F (40 °C) - 10 min power circuit 430 A 104 °F (40 °C) - 1 s power circuit 150 A 104 °F (40 °C) - 1 min power circuit 310 A 104 °F (40 °C) - 10 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
  • Motor Power Kw
    18.5 kW 500 V AC 50/60 Hz AC-3) 18.5 kW 660...690 V AC 50/60 Hz AC-3) 7.5 kW 400 V AC 50/60 Hz AC-4) 18.5 kW 380...400 V AC 50/60 Hz AC-3) 9 kW 220...230 V AC 50/60 Hz AC-3) 18.5 kW 415...440 V AC 50/60 Hz AC-3)
  • [Ui] Rated Insulation Voltage
    Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL Power circuit 690 V IEC 60947-4-1
  • Standards
    CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
  • Motor Power HP (UL / CSA)
    10 hp 230/240 V at AC 50/60 Hz for 3 phase 10 hp 200/208 V at AC 50/60 Hz for 3 phase 5 hp 240 V at AC 50/60 Hz for 1 phase 20 hp 480 V at AC 50/60 Hz for 3 phase 25 hp 600 V at AC 50/60 Hz for 3 phase
  • Control Circuit Voltage Limits
    0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
  • Tightening Torque
    Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 22.13 lbf.in (2.5 N.m) screw clamp terminals flat Ø 6 mm Power circuit 22.13 lb
  • Connections - Terminals
    Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)fle
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 63 A gG <= 690 V type 2 power circuit
  • Irms Rated Making Capacity
    140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 550 A 440 V power circuit IEC 60947
  • Utilisation Category
    AC-3 AC-4 AC-1
  • Mounting Support
    Rail Plate
  • Electrical Durability
    1.4 Mcycles 50 A AC-1 <= 440 V 1.4 Mcycles 38 A AC-3 <= 440 V
  • Operating Time
    4...19 ms opening 12...22 ms closing
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • Hold-In Power Consumption In VA
    7.5 VA 60 Hz 0.3 68 °F (20 °C)) 7 VA 50 Hz 0.3 68 °F (20 °C))
  • [Ue] Rated Operational Voltage
    Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
  • Power Dissipation Per Pole
    5 W AC-1 3 W AC-3
  • Inrush Power In VA
    70 VA 60 Hz 0.75 68 °F (20 °C)) 70 VA 50 Hz 0.75 68 °F (20 °C))
  • [Ie] Rated Operational Current
    50 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit 38 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit
  • Contactor Application
    Resistive load Motor control
  • [Ith] Conventional Free Air Thermal Current
    10 A 140 °F (60 °C) signalling circuit 50 A 140 °F (60 °C) power circuit
  • Insulation Resistance
    > 10 MOhm signalling circuit
  • Minimum Switching Voltage
    17 V signalling circuit
  • Minimum Switching Current
    5 mA signalling circuit
  • Signalling Circuit Frequency
    25...400 Hz
  • Heat Dissipation
    2…3 W 50/60 Hz
  • Coil Technology
    Without built-in suppressor module
  • Mechanical Durability
    15 Mcycles
  • Maximum Operating Rate
    3600 cyc/h 140 °F (60 °C)
  • Front Cover
    With
  • Average Impedance
    2 mOhm - Ith 50 A 50 Hz power circuit
  • Rated Breaking Capacity
    550 A 440 V power circuit IEC 60947
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Overvoltage Category
    III
  • Control Circuit Type
    AC 50/60 Hz
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV IEC 60947
  • [Uc] Control Circuit Voltage
    115 V AC 50/60 Hz
  • Power Pole Contact Composition
    3 NO
  • Product Or Component Type
    Contactor
  • Device Short Name
    LC1D
  • Poles Description
    3P
  • Range
    TeSys
  • Product Name
    TeSys D

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D38FE7 on Powermatic Associates is $245.95. Order now.

LC1D38FE7 Related Documents

Product Datasheet-1631038596591.pdfInstruction Sheet-1631038596593.pdf

Similar products from: Schneider Electric Industrial Automation Components

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
VW3A9921 on Powermatic Associates

VW3A9921

Schneider Electric

Schneider Electric VW3A9921 is an adapter designed for direct circuit breaker mounting. This mechanical adapter kit facilitates the integration of components by providing a compatible interface for secure and straightforward installation.

12 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock

Manufacturer warranty

LC1D38FE7 Schneider Electric

$245.95

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$245.95

$245.95 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1D38FE7 with other Industrial Automation Components products

Product Certifications

[Icw] Rated Short-Time Wi...

Motor Power Kw

[Ui] Rated Insulation Vol...

Standards

Motor Power HP (UL / CSA)

Control Circuit Voltage L...

Tightening Torque

Connections - Terminals

Associated Fuse Rating

Selected product

LC1D38FE7
Backordered
LC1D38FE7
Schneider Electric

Schneider Electric LC1D38FE7 is a magnetic contactor from the Deca sub-range, featuring screw connec...

Product CertificationsGL BV GOST LROS (Lloyds regi...

[Icw] Rated Short-Time Withstand Current60 A 104 °F (40 °C) - 10 min...

Motor Power Kw18.5 kW 500 V AC 50/60 Hz AC...

[Ui] Rated Insulation VoltagePower circuit 600 V CSA Powe...

StandardsCSA C22.2 No 14 EN 60947-4-1...

Motor Power HP (UL / CSA)10 hp 230/240 V at AC 50/60 ...

Control Circuit Voltage Limits0.3...0.6 Uc -40…158 °F (-40...

Tightening TorqueControl circuit 15.05 lbf.in...

Connections - TerminalsControl circuit screw clamp ...

Associated Fuse Rating10 A gG signalling circuit I...

LC1D326BL
4 in stock
LC1D326BL
Schneider Electric

Schneider Electric LC1D326BL is a magnetic contactor from the Deca sub-range, featuring a low-consum...

Product Certifications-

[Icw] Rated Short-Time Withstand Current-

Motor Power Kw7.5 kW 220...230 V AC 50/60 ...

[Ui] Rated Insulation Voltage-

Standards-

Motor Power HP (UL / CSA)-

Control Circuit Voltage Limits-

Tightening Torque-

Connections - Terminals-

Associated Fuse Rating-

LC1D326BD
3 in stock
LC1D326BD
Schneider Electric

Schneider Electric LC1D326BD is a magnetic contactor from the Deca sub-range, designed with ring-lug...

Product Certifications-

[Icw] Rated Short-Time Withstand Current-

Motor Power Kw7.5 kW 220...230 V AC 50/60 ...

[Ui] Rated Insulation Voltage-

Standards-

Motor Power HP (UL / CSA)-

Control Circuit Voltage Limits-

Tightening Torque-

Connections - Terminals-

Associated Fuse Rating-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MFI1FRL17N4 on Powermatic Associates

MFI1FRL17N4

Novanta IMS

Novanta IMS MFI1FRL17N4 is a stepper motor controller within the Stepper motor controllers sub-range, designed under the MicroDrive series. It operates with a supply voltage range of 12Vdc to 48Vdc, nominally at 24Vdc, and supports a rated current of 3A. This controller is equipped for DC stepper motor drive functions and features an ambient air temperature for operation between 0 and +65 °C. For connectivity, it includes 30cm / 12" bare end flying leads, a 10-pin wire crimp connector, and a 4-pin wire crimp connector. Communication with the controller is facilitated through RS-422 and RS-485 protocols. It also offers 4 x digital outputs (sinking; NPN) and 4 x digital inputs (sourcing; NPN). The device is designed to be stored in conditions ranging from -25 to +70 °C ambient air temperature.

0 in stock
MDI4MRQ34C1-EQ on Powermatic Associates

MDI4MRQ34C1-EQ

Novanta IMS

Novanta IMS MDI4MRQ34C1-EQ is a stepper motor designed with an integrated driver and a 2-phase AC stepper motor configuration. It features an external single-end 512-line optical encoder and is built with a triple (3) motor stack, Plus 2 version for expanded features. This motor offers connectivity through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. It operates on a supply voltage of 120Vac and is mounted via an 85x85mm flange. The MDI4MRQ34C1-EQ is designed to function within an ambient air temperature range of 0 to +85°C and is protected to a degree of IP65. It has a moment of inertia of 3.4kg.cm^2 and provides a stall torque of 529N.cm, with a resolution characterized by a 1.8° step angle.

0 in stock
LMHCA571C on Powermatic Associates

LMHCA571C

Novanta IMS

Novanta IMS LMHCA571C is a stepper motor that falls under the high-torque stepper motors sub-range. It features an integrated driver and a high-torque DC stepper motor with an incremental magnetic encoder, utilizing a single motor stack and closed-loop hMTechnology for precise control. This motor offers a variety of connection types, including a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting CANopen communication protocol. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The LMHCA571C is designed for mounting with a 57x57mm flange and is rated with a degree of protection of IP65, making it suitable for environments where dust and water resistance is necessary. It has a moment of inertia of 0.14kg.cm^2 and can deliver a stall torque of 107N.cm. The resolution of this stepper motor is defined by a 1.8° step angle.

0 in stock

Relevant products

LC1D65AG7 on Powermatic Associates

LC1D65AG7

Verified stock: 5

Schneider Electric LC1D65AG7 is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. It is a 3-pole (3P; 3NO) contactor with a rated current of 80A for AC-1 and 65A for 440Vac in AC-3. Designed for DIN rail mounting, it has a net width of 55 mm and offers an IP20 degree of protection. The control voltage (AC) ranges from 96-132Vac at 50Hz and 102-132Vac at 60Hz, with a nominal control voltage of 120Vac. It operates at a rated operating voltage (Ue) of up to 690 V and includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and it can handle rated active power from 18.5kW at 220-230Vac to 37kW at 660-690Vac in AC-3. It also features 1 normally closed (NC) auxiliary contact with instantaneous aux. contacts type 1NO+1NC. The rated power in horsepower (HP) varies from 5HP at 115Vac single-phase to 50HP at 575-600Vac three-phase, under UL/CSA standards. Its mechanical durability is rated at 6,000,000 operations, and its electrical durability with load is 1,400,000 operations. The rated voltage (AC) phase-to-phase is 690 V.

Schneider Electric

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D150G7 on Powermatic Associates

LC1D150G7

Verified stock: 10

Schneider Electric LC1D150G7 is a magnetic contactor from the Deca sub-range, designed with screw connections and three poles (3P; 3NO). It has a rated current of 200A for AC-1 and 150A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 120 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (AC) range of 96-138Vac (120Vac nominal; 50Hz/60Hz; 0.8...1.15 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it features 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 40kW at 220-230Vac to 100kW at 660-690Vac in AC-3 conditions. Additionally, it includes 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) varies from 40HP at 200-208Vac to 125HP at 575-600Vac for 3-phase, 50Hz/60Hz, UL/CSA. The mechanical durability of the LC1D150G7 is rated at 8 million operations at no load, and its electrical durability with load is 850,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

LC1D186BL on Powermatic Associates

LC1D186BL

Verified stock: 2

Schneider Electric LC1D186BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that consumes less than 2.4W. It features ring-lugs connections and is equipped with three poles (3P; 3NO), supporting a rated current of 32A for AC-1 and 18A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and it can handle rated active power ranging from 4kW at 220-230Vac to 10kW at 660-690Vac in AC-3. Additionally, it has 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) varies from 1HP at 115Vac in single-phase to 15HP at 575-600Vac in three-phase, under UL/CSA standards. Its mechanical durability is up to 15 million operations at no load, and its electrical durability reaches 1.6 million operations with load. The rated voltage (AC) phase-to-phase is 690 V, and its power consumption is specified at 2.4 W.

Schneider Electric

LC1D95M7 on Powermatic Associates

LC1D95M7

Verified stock: 17

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

FAQ

What is the price of LC1D38FE7?
Purchase the LC1D38FE7 from Powermatic Associates at the price of $245.95. Order today.

Out if stock but available for backorder.

Schneider Electric LC1D38FE7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 50A (AC-1) and 38A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 45 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 92-126Vac (115Vac nominal; 50Hz; 0.8...1.1 x Uc) to 98-126Vac (115Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 9kW at 220-230Vac to 18.5kW at 660-690Vac (all AC-3), and its rated power (HP) ranges from 2HP at 115Vac to 25HP at 575-600Vac, covering both single-phase and 3-phase configurations under UL/CSA standards. The mechanical durability of the LC1D38FE7 is rated at 15 million operations at no load, and its electrical durability is rated at 1.4 million operations with load. The rated voltage (AC) for phase-to-phase connections is 690 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock