LC1D50AE7 Schneider Electric Industrial Automation Components


Part#:LC1D50AE7
Manufacturer:Schneider Electric
Category:Industrial Automation Components
Product Lifecycle:Active
Product description
Schneider Electric LC1D50AE7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design and screw connections. It is a 3-pole (3P; 3NO) device with a rated current of 80A for AC-1 and 50A for 440Vac in AC-3. This contactor is designed for DIN rail mounting and has a net width of 55 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (AC) range of 38.4-52.8Vac at 50Hz and 40.8-52.8Vac at 60Hz, with a nominal voltage of 48Vac. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power ranges from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D50AE7 is rated at 6 million operations, and its electrical durability with load is 1.45 million operations. The rated voltage for phase-to-phase connections is 690 V.
Product Details
- Range TeSys
- [Uc] Control Circuit Voltage 48 V AC 50/60 Hz
- Minimum Switching Voltage 17 V signalling circuit
- Poles Description 3P
- [Uimp] Rated Impulse Withstand Voltage 6 kV IEC 60947
- Maximum Operating Rate 3600 cyc/h 140 °F (60 °C)
- Front Cover With
- Insulation Resistance > 10 MOhm for signalling circuit
- Power Pole Contact Composition 3 NO
- Mechanical Durability 6 Mcycles
- Minimum Switching Current 5 mA signalling circuit
- Heat Dissipation 4…5 W 50/60 Hz
- Device Short Name LC1D
- Auxiliary Contact Composition 1 NO + 1 NC
- Signalling Circuit Frequency 25...400 Hz
- Product Name TeSys D
- Overvoltage Category III
- Product Or Component Type Contactor
- Rated Breaking Capacity 900 A 440 V power circuit IEC 60947
- Coil Technology Without built-in suppressor module
- Control Circuit Type AC at 50/60 Hz
- Average Impedance 1.5 mOhm - Ith 80 A 50 Hz power circuit
- Mounting Support Plate Rail
- Contactor Application Motor control Resistive load
- Hold-In Power Consumption In VA 13 VA 60 Hz 0.3 68 °F (20 °C)) 15 VA 50 Hz 0.3 68 °F (20 °C))
- Electrical Durability 1.45 Mcycles 50 A AC-3 <= 440 V 1.1 Mcycles 80 A AC-1 <= 440 V
- [Ue] Rated Operational Voltage Power circuit: <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
- Safety Reliability Level B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- [Ie] Rated Operational Current 50 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit 80 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
- Power Dissipation Per Pole 3.7 W AC-3 9.6 W AC-1
- Non-Overlap Time 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
- Operating Time 4...19 ms opening 12...26 ms closing
- Inrush Power In VA 140 VA 60 Hz 0.75 68 °F (20 °C)) 160 VA 50 Hz 0.75 68 °F (20 °C))
- Auxiliary Contacts Type Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
- [Ith] Conventional Free Air Thermal Current 10 A 140 °F (60 °C) signalling circuit 80 A 140 °F (60 °C) power circuit
- Utilisation Category AC-1 AC-4 AC-3
- Connections - Terminals Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)fle
- Irms Rated Making Capacity 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 900 A 440 V power circuit IEC 60947
- Tightening Torque Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 70.81 lbf.in (8 N.m) EverLink BTR screw connectors 0.04…0.05 in² (25…35 mm²) hexagon
- Associated Fuse Rating 10 A gG signalling circuit IEC 60947-5-1 100 A gG <= 690 V type 1 power circuit 100 A gG <= 690 V type 2 power circuit
- Product Certifications RINA CCC BV GL UL LROS (Lloyds register of shipping) CSA DNV GOST
- Control Circuit Voltage Limits 0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
- [Icw] Rated Short-Time Withstand Current 400 A 104 °F (40 °C) - 10 s power circuit 810 A 104 °F (40 °C) - 1 s power circuit 84 A 104 °F (40 °C) - 10 min power circuit 208 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
- Motor Power HP (UL / CSA) 3 hp 115 V at AC 50/60 Hz for 1 phase 7.5 hp 230/240 V at AC 50/60 Hz for 1 phase 15 hp 200/208 V at AC 50/60 Hz for 3 phase 15 hp 230/240 V at AC 50/60 Hz for 3 phase 40 hp 460/480 V at AC 50/60 Hz for 3 phase 40 hp 575/600 V at
- Standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
- Motor Power Kw 15 kW 220...230 V AC 50/60 Hz AC-3) 22 kW 380...400 V AC 50/60 Hz AC-3) 30 kW 500 V AC 50/60 Hz AC-3) 33 kW 660...690 V AC 50/60 Hz AC-3) 25 kW 415 V AC 50/60 Hz AC-3) 30 kW 440 V AC 50/60 Hz AC-3) 11 kW 400 V AC 50/60 Hz AC-
- [Ui] Rated Insulation Voltage Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL Power circuit 690 V IEC 60947-4-1
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D50AE7 on Powermatic Associates is $306.26. Order now.
LC1D50AE7 Related Documents
Similar products from: Schneider Electric Industrial Automation Components
Manufacturer warranty
LC1D50AE7 Schneider Electric
$306.26
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$306.26
$306.26 each
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare LC1D50AE7 with other Industrial Automation Components products
Range
[Uc] Control Circuit Volt...
Minimum Switching Voltage
Poles Description
[Uimp] Rated Impulse With...
Maximum Operating Rate
Front Cover
Insulation Resistance
Power Pole Contact Compos...
Mechanical Durability
Selected product

LC1D50AE7
Schneider Electric
Schneider Electric LC1D50AE7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(...
RangeTeSys
[Uc] Control Circuit Voltage48 V AC 50/60 Hz
Minimum Switching Voltage17 V signalling circuit
Poles Description3P
[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947
Maximum Operating Rate3600 cyc/h 140 °F (60 °C)
Front CoverWith
Insulation Resistance> 10 MOhm for signalling cir...
Power Pole Contact Composition3 NO
Mechanical Durability6 Mcycles
About the manufacturer
Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...
Recently viewed products
Relevant products
FAQ
What is the price of LC1D50AE7?
Purchase the LC1D50AE7 from Powermatic Associates at the price of $306.26. Order today.
Out if stock but available for backorder.
Schneider Electric LC1D50AE7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design and screw connections. It is a 3-pole (3P; 3NO) device with a rated current of 80A for AC-1 and 50A for 440Vac in AC-3. This contactor is designed for DIN rail mounting and has a net width of 55 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (AC) range of 38.4-52.8Vac at 50Hz and 40.8-52.8Vac at 60Hz, with a nominal voltage of 48Vac. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power ranges from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D50AE7 is rated at 6 million operations, and its electrical durability with load is 1.45 million operations. The rated voltage for phase-to-phase connections is 690 V.
Similar products from: Industrial Automation Components
What can I help you find today?