LC1D95SD Schneider Electric Industrial Automation Components

Product Details

• Product Certifications
  IECEE CB Scheme CCC EAC LROS (Lloyds register of shipping) RINA BV DNV-GL
• [Icw] Rated Short-Time Withstand Current
  1100 A 104 °F (40 °C) - 1 s power circuit 800 A 104 °F (40 °C) - 10 s power circuit 400 A 104 °F (40 °C) - 1 min power circuit 135 A 104 °F (40 °C) - 10 min power circuit 140 A - 100 ms signalling circuit 120 A - 500 ms signalling
• Motor Power HP (UL / CSA)
  7.5 hp 115 V at AC 60 Hz for 1 phase 15 hp 230/240 V at AC 60 Hz for 1 phase 25 hp 200/208 V at AC 60 Hz for 3 phase 30 hp 230/240 V at AC 60 Hz for 3 phase 60 hp 460/480 V at AC 60 Hz for 3 phase 60 hp 575/600 V at AC 60 Hz for 3
• Motor Power Kw
  25 kW 220...230 V AC 50 Hz AC-3) 45 kW 380...400 V AC 50 Hz AC-3) 45 kW 415...440 V AC 50 Hz AC-3) 55 kW 500 V AC 50 Hz AC-3) 45 kW 660...690 V AC 50 Hz AC-3) 45 kW 1000 V AC 50 Hz AC-3)
• Tightening Torque
  Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals flat Ø 6 mm Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals Philips No 2 Power circuit 106.21 lbf.in (12 N.m) connector flat Ø 6 to Ø 8 mm Power circuit 106.21 lbf.in
• Standards
  EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.4
• Connections - Terminals
  Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flex
• Irms Rated Making Capacity
  1100 A 440 V AC power circuit IEC 60947 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1
• Control Circuit Voltage Limits
  0.1...0.3 Uc -40…158 °F (-40…70 °C) drop-out DC 0.85...1.1 Uc -40…131 °F (-40…55 °C) operational DC 1...1.1 Uc 131…158 °F (55…70 °C) operational DC
• Utilisation Category
  AC-1 AC-4 AC-3
• Associated Fuse Rating
  10 A gG signalling circuit IEC 60947-5-1 200 A gG <= 690 V type 1 power circuit 160 A gG <= 690 V type 2 power circuit
• [Ith] Conventional Free Air Thermal Current
  10 A 140 °F (60 °C) signalling circuit 125 A 140 °F (60 °C) power circuit
• Mounting Support
  Rail Plate
• [Ui] Rated Insulation Voltage
  Power circuit 1000 V IEC 60947-4-1 Signalling circuit 690 V IEC 60947-1
• Electrical Durability
  1.2 Mcycles 95 A AC-3 1.3 Mcycles 125 A AC-1
• Safety Reliability Level
  B10d = 1.3 Mcycles contactor with nominal load EN/ISO 13849-1 B10d = 20 Mcycles contactor with mechanical load EN/ISO 13849-1
• Auxiliary Contacts Type
  Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
• Non-Overlap Time
  1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
• Power Dissipation Per Pole
  12.5 W AC-1 7.2 W AC-3
• Contactor Application
  Motor control Resistive load
[Ie] Rated Operational Current
95 A 140 °F (60 °C)) <= 440 V AC-3 power circuit 125 A 140 °F (60 °C)) <= 690 V AC-1 power circuit
Operating Time
95...130 ms closing 20...35 ms opening
Minimum Switching Current
5 mA signalling circuit
Hold-In Power Consumption In W
22 W 68 °F (20 °C)
[Ue] Rated Operational Voltage
Power circuit 1000 V AC 25...400 Hz
Range
TeSys
Insulation Resistance
> 10 MOhm signalling circuit
Signalling Circuit Frequency
25...400 Hz
Minimum Switching Voltage
17 V signalling circuit
Inrush Power In W
22 W 68 °F (20 °C))
Time Constant
75 ms
Coil Technology
Without built-in suppressor module
Maximum Operating Rate
3600 cyc/h 140 °F (60 °C)
Mechanical Durability
10 Mcycles
Front Cover
With
Average Impedance
0.8 mOhm - Ith 125 A 50 Hz power circuit
Rated Breaking Capacity
1100 A 440 V power circuit IEC 60947
Overvoltage Category
III
Control Circuit Type
DC standard
[Uimp] Rated Impulse Withstand Voltage
8 kV IEC 60947
Auxiliary Contact Composition
1 NO + 1 NC
[Uc] Control Circuit Voltage
72 V DC
Power Pole Contact Composition
3 NO
Poles Description
3P
Device Short Name
LC1D
Product Or Component Type
Contactor
Product Name
TeSys D

LC1D95SD Related Documents