Powermatic Associates Logo

MH30703P11F2200 Schneider Electric Industrial Automation Components

MH30703P11F2200 on Powermatic Associates
Schneider Electric

Part#:MH30703P11F2200

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric MH30703P11F2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and an operational ambient air temperature range of -20 to +40°C. This motor features an absolute single-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and triple motor stacks designed for optimized torque and speed of rotation with medium inertia. It offers a rotatable right-angled connector for its connection type and supports a wide supply voltage range of 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Falling under the Servo motors sub-range, it has an IP65 degree of protection and utilizes the HIPERFACE communication protocol. The motor achieves a rotational speed of 5000rpm, a stall torque of 3.4Nm, and is rated at 1.3kW or 1300W of active power, equivalent to 1.8HP. It has a moment of inertia of 4kg.cm^2, with a nominal torque of 2.3Nm and a maximum torque capability of 10.2Nm.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock
M9XCTC15 on Powermatic Associates

M9XCTC15

Schneider Electric

Schneider Electric M9XCTC15 is a cover designed specifically for use with M9XC comb busbars. It belongs to the Comb busbars sub-range and serves as a Multi 9 - tooth cover. This product comes as a set of 5, tailored to enhance the application and integration of M9XC comb busbars within electrical installations.

10 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock

Manufacturer warranty

MH30703P11F2200 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MDI1FRD23A7-N on Powermatic Associates

MDI1FRD23A7-N

Novanta IMS

Novanta IMS MDI1FRD23A7-N is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase DC stepper motor design. It includes a rear control knob and a single motor stack in its Plus version, which encompasses standard features. This part offers a connection through 30cm / 12" bare end flying leads with a 10-pin IDC non-locking connector. It supports RS-422 and RS-485 communication protocols. The supply voltage requirement ranges from 12Vdc to 75Vdc, with optimal performance at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with a 57x57mm flange. The operational ambient air temperature range is from 0 to +85°C. It has an IP20 degree of protection, a moment of inertia of 0.18kg.cm^2, a stall torque of 64N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

MH30701P16A2200 on Powermatic Associates

MH30701P16A2200

Verified stock: 0

Schneider Electric MH30701P16A2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and designed to operate within an ambient air temperature range of -20 to +40°C. This motor features an absolute single-turn 16ppr SinCos encoder, a parallel key shaft, and a single motor stack optimized for torque and speed of rotation with medium inertia. It includes a rotatable right-angled connector for connectivity and supports a wide supply voltage range from 115Vac to 480Vac, accommodating multiple standard voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Part of the Servo motors sub-range, it offers an IP65 degree of protection and utilizes the HIPERFACE communication protocol. The motor achieves a rotational speed of 5500rpm, a stall torque of 1.4Nm, and is rated at 0.75kW (750W) or approximately 1HP. It has a moment of inertia of 1.6kg.cm2, with a nominal torque of 1.3Nm and a maximum torque capability of 4.2Nm.

Schneider Electric

MH30701P11A2200 on Powermatic Associates

MH30701P11A2200

Verified stock: 0

Schneider Electric MH30701P11A2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. This motor features an absolute single-turn 128ppr SinCos encoder, a parallel key shaft, and a single motor stack designed for optimized torque and speed of rotation with medium inertia. It connects via a rotatable right-angled connector and supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. As part of the Servo motors sub-range, it offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. The motor achieves a rotational speed of 5500rpm, a stall torque of 1.4Nm, and is rated at 0.75kW (750W) or 1HP in active power. It has a moment of inertia of 1.6kg.cm2, with a nominal torque of 1.3Nm and a maximum torque capability of 4.2Nm.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric MH30703P11F2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and an operational ambient air temperature range of -20 to +40°C. This motor features an absolute single-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and triple motor stacks designed for optimized torque and speed of rotation with medium inertia. It offers a rotatable right-angled connector for its connection type and supports a wide supply voltage range of 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Falling under the Servo motors sub-range, it has an IP65 degree of protection and utilizes the HIPERFACE communication protocol. The motor achieves a rotational speed of 5000rpm, a stall torque of 3.4Nm, and is rated at 1.3kW or 1300W of active power, equivalent to 1.8HP. It has a moment of inertia of 4kg.cm^2, with a nominal torque of 2.3Nm and a maximum torque capability of 10.2Nm.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts