RM35ATR5MW Schneider Electric Industrial Automation Components

Product Details

• Minimum Switching Current
  10 mA 5 V DC
• Maximum Power Consumption In W
  0.6 W DC
• Overvoltage Category
  III IEC 60664-1
• Nominal Output Current
  5 A
• Width
  1.38 in (35 mm)
• Time Delay Range
  0.1...10 s adjustable 0...10 % of the full scale value)
• Relay Type
  Temperature control relays
• Resistance Across Terminals
  1.33 kOhm temperature
• Operating Position
  Any position without derating
• Relay Name
  RM35AT
• Range Of Product
  Harmony Control Relays
• Switching Capacity In VA
  1250 VA
• Product Or Component Type
  Temperature control relay
• Reset Time
  8 s
• Product Specific Application
  For elevator machine rooms and 3-phase supplies
• Output Contacts
  2 NO
• [Ui] Rated Insulation Voltage
  250 V IEC 60664-1
• Temperature Probe Type
  Pt 100 - 3-wire
• Supply Frequency
  50/60 Hz +/- 10 %
• Electrical Durability
  100000 cycles
Installed Device
Pt 100 probe cable length <= 10 m
Housing Material
Self-extinguishing plastic
Measurement Accuracy
+/- 2 °C
Operating Rate
<= 360 operations/hour full load
[Us] Rated Supply Voltage
24...240 V AC/DC
Mounting Support
35 mm symmetrical DIN rail conforming to EN/IEC 60715
Maximum Power Consumption In VA
3.5 VA AC
Contacts Material
Cadmium free
Mechanical Durability
30000000 cycles
Insulation
Galvanic insulation between supply and measurement
Maximum Switching Voltage
250 V AC/DC
Delay At Power Up
0.2 s
Tightening Torque
5.31…8.85 lbf.in (0.6…1 N.m) IEC 60947-1
Supply Voltage Limits
20.4…264 V AC 21.6…264 V DC
Relay Monitored Parameters
Overtemperature: 34...46°C Undertemperature: -1...11°C
Response Time
<= 3.5 s + Tt (in case of temperature fault) <= 3.5 s (on disappearance of fault)
Operating Voltage Tolerance
- 10 % + 10 % Un DC - 15 % + 10 % Un AC
Marking
CE : EMC 89/336/EEC CE : 73/23/EEC
Local Signalling
1 LED Green power ON 1 LED Yellow correct temperature (high R1) 1 LED Yellow correct temperature (low R2)
Insulation Resistance
> 500 MOhm 500 V DC between supply and relay output IEC 60255-5 > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 > 500 MOhm 500 V DC between supply and relay o
Connections - Terminals
Screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end Sc
Utilisation Category
AC-12 IEC 60947-5-1 AC-13 IEC 60947-5-1 AC-14 IEC 60947-5-1 AC-15 IEC 60947-5-1 DC-12 IEC 60947-5-1 DC-13 IEC 60947-5-1 DC-14 IEC 60947-5-1

RM35ATR5MW Related Documents