Powermatic Associates Logo

TM3XTYS4 Schneider Electric Industrial Automation Components

TM3XTYS4 on Powermatic Associates
Schneider Electric

Part#:TM3XTYS4

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric TM3XTYS4 is an I/O unit categorized under the Modicon TM3 I/O modules sub-range, designed to function as a parallel interface module. It features a connection type of screw terminal block with 4 x RJ45 connectors and operates on a supply voltage of 19-30Vdc, with a nominal voltage of 24Vdc. This unit can be mounted on a symmetrical rail or panel and is designed to operate within an ambient air temperature range of +14...+131°F / -10...+55 °C for horizontal installation and +14...+95°F / -10...+35 °C for vertical installation. It offers a degree of protection of IP20 and includes 8 x digital outputs (24Vdc 300mA; Source) and 12 x digital inputs (24Vdc). The current consumption varies, with 5mA (at 5Vdc via bus connector at state on), 35mA (at 5Vdc via bus connector at state off), 0mA (at 24Vdc via bus connector at state on), 10mA (at 24Vdc via bus connector at state off), and 1200mA (at 24Vdc external power supply at state on). It is designed to withstand an ambient air temperature for storage of -13...+158°F / -25...+70 °C and a humidity range of 10-95% without condensation in operation and in storage.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of TM3XTYS4 on Powermatic Associates is $142.00. Order now.

Similar products from: Schneider Electric Industrial Automation Components

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
VW3A9921 on Powermatic Associates

VW3A9921

Schneider Electric

Schneider Electric VW3A9921 is an adapter designed for direct circuit breaker mounting. This mechanical adapter kit facilitates the integration of components by providing a compatible interface for secure and straightforward installation.

12 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock

Manufacturer warranty

TM3XTYS4 Schneider Electric

$142.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$142.00

$142.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MFI1FRL17N4 on Powermatic Associates

MFI1FRL17N4

Novanta IMS

Novanta IMS MFI1FRL17N4 is a stepper motor controller within the Stepper motor controllers sub-range, designed under the MicroDrive series. It operates with a supply voltage range of 12Vdc to 48Vdc, nominally at 24Vdc, and supports a rated current of 3A. This controller is equipped for DC stepper motor drive functions and features an ambient air temperature for operation between 0 and +65 °C. For connectivity, it includes 30cm / 12" bare end flying leads, a 10-pin wire crimp connector, and a 4-pin wire crimp connector. Communication with the controller is facilitated through RS-422 and RS-485 protocols. It also offers 4 x digital outputs (sinking; NPN) and 4 x digital inputs (sourcing; NPN). The device is designed to be stored in conditions ranging from -25 to +70 °C ambient air temperature.

0 in stock
MDI4MRQ34C1-EQ on Powermatic Associates

MDI4MRQ34C1-EQ

Novanta IMS

Novanta IMS MDI4MRQ34C1-EQ is a stepper motor designed with an integrated driver and a 2-phase AC stepper motor configuration. It features an external single-end 512-line optical encoder and is built with a triple (3) motor stack, Plus 2 version for expanded features. This motor offers connectivity through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. It operates on a supply voltage of 120Vac and is mounted via an 85x85mm flange. The MDI4MRQ34C1-EQ is designed to function within an ambient air temperature range of 0 to +85°C and is protected to a degree of IP65. It has a moment of inertia of 3.4kg.cm^2 and provides a stall torque of 529N.cm, with a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

TM3XTRA1 on Powermatic Associates

TM3XTRA1

Verified stock: 0

Schneider Electric TM3XTRA1 is a remote I/O controller within the Modicon TM3 I/O modules sub-range, designed for remote data transmission and I.O. expansion. It features a removable screw terminal block and 1 x RJ45 connector for connectivity. The unit operates on a supply voltage of 19-30Vdc, with a nominal voltage of 24Vdc, and can be mounted on a symmetrical rail or panel. It is designed to operate within an ambient air temperature range of +14 to +131°F (-10 to +55°C) for horizontal installation and +14 to +122°F (-10 to +50°C) for vertical installation. The TM3XTRA1 offers an IP20 degree of protection and has a current consumption of 100mA (at 5Vdc via bus connector at state on) and 30mA (at 5Vdc via bus connector at state off). It can be stored in conditions ranging from -40 to +158°F (-40 to +70°C) and operates in humidity levels of 5-95% without condensation.

Schneider Electric

TM3XREC1 on Powermatic Associates

TM3XREC1

Verified stock: 0

Schneider Electric TM3XREC1 is a remote I/O controller within the Modicon TM3 I/O modules sub-range. It functions as a remote data receiver and I.O. expansion module, featuring a removable screw terminal block and 1 x RJ45 connector for connections. This part operates on a supply voltage of 19-30Vdc, with a nominal voltage of 24Vdc, and can be mounted on a symmetrical rail or panel. It is designed to operate within an ambient air temperature range of +14...+131°F / -10...+55°C for horizontal installation and +14...+122°F / -10...+50°C for vertical installation. The TM3XREC1 offers a degree of protection rated at IP20 and has a current consumption of 40mA at 24Vdc via the bus connector. It can be stored in conditions ranging from -40...+158°F / -40...+70°C and operates effectively in humidity levels of 5-95% without condensation.

Schneider Electric

FAQ

What is the price of TM3XTYS4?
Purchase the TM3XTYS4 from Powermatic Associates at the price of $142.00. Order today.

Out if stock but available for backorder.

Schneider Electric TM3XTYS4 is an I/O unit categorized under the Modicon TM3 I/O modules sub-range, designed to function as a parallel interface module. It features a connection type of screw terminal block with 4 x RJ45 connectors and operates on a supply voltage of 19-30Vdc, with a nominal voltage of 24Vdc. This unit can be mounted on a symmetrical rail or panel and is designed to operate within an ambient air temperature range of +14...+131°F / -10...+55 °C for horizontal installation and +14...+95°F / -10...+35 °C for vertical installation. It offers a degree of protection of IP20 and includes 8 x digital outputs (24Vdc 300mA; Source) and 12 x digital inputs (24Vdc). The current consumption varies, with 5mA (at 5Vdc via bus connector at state on), 35mA (at 5Vdc via bus connector at state off), 0mA (at 24Vdc via bus connector at state on), 10mA (at 24Vdc via bus connector at state off), and 1200mA (at 24Vdc external power supply at state on). It is designed to withstand an ambient air temperature for storage of -13...+158°F / -25...+70 °C and a humidity range of 10-95% without condensation in operation and in storage.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock