2110-5201 WAGO Industrial Automation Components

Wago 2110-5201 is a feed-through terminal block designed for push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 57A (IEC), 74A (IEC), 65A (UL), 57A (Ex e II), and 50A (Ex e II with jumper). This terminal block features a 1-deck/level design with a lever and button, side and center marking slots, and a test port. It has a net height for impulse voltage of 8 kV (IEC) and a rated impulse voltage (Uimp) of 10 mm. The net width accommodates 1 feed-through pole (1P), and it is designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5). The terminal block comes in gray with an orange actuator, and its dimensions are H89mm x W10mm x D36.9mm. It is suitable for 0.5mm2 to 16mm2 fine stranded or solid conductors and #20AWG to #6AWG fine stranded or solid conductors, with a 10mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 2-wires (1 push-in + 1 push-in) (1+1) for normally closed (NC) auxiliary contacts. The terminal block operates at a diameter of 800 V (IEC), 600 V (UL), and 550 V (Ex e II) with a network frequency belonging to the TOPJOB S series.