2116-1301 WAGO Industrial Automation Components

Wago 2116-1301 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for secure and maintenance-free wire termination. This terminal block is rated for currents up to 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is designed with a single deck and includes a lever, side and center marking slots, and a test port, making it suitable for Ex e II applications. The terminal block has a net height of 8 kV for rated impulse voltage (Uimp) and measures 12 mm in width, supporting a control voltage for DIN-35 rail mounting. It comes in gray with an orange actuator, and its dimensions are H113.5mm x W12mm x D36.9mm. This terminal block accommodates wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors, with a 16mm2 nominal cross-section for the main feed-through conductor. The material used is Polyamide (PA) 66, and it features 3-wire connections (1 push-in + 2 push-in) for normally closed (NC) auxiliary contacts. The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.