2716-207 WAGO Industrial Automation Components

WAGO 2716-207 is an automation part with a short circuit breaking rating and electrical data compliant with IEC/EN 60664-1 standards. It features a nominal voltage of 800V (III/3), 1000V (III/2), and 1000V (II/2), with a rated impulse voltage of 8kV for both III/3 and III/2 overvoltage categories, and a rated surge voltage of 8kV for category II/2. The part has a rated current of 76A according to IEC/EN standards. Under UL 1059 approvals, it has a rated voltage of 600V and a rated current of 65A for both Use Group B and C. It offers 7 connection points, with a total of 7 potentials and a single connection type across one level, utilizing CAGE CLAMP technology with lever actuation. The connection supports solid and fine-stranded conductors ranging from 1.5 to 16mm2 (16 to 6 AWG), including fine-stranded conductors with both insulated and uninsulated ferrules up to 10mm2, requiring a strip length of 12 to 13mm. The conductor connection direction to PCB is 30 degrees, with a pole number of 7. Physically, it has a pin spacing of 15mm, dimensions of 100mm in width, 33.3mm in height, 30mm in depth, and a height from the surface of 28.8mm. The solder pin length is 4.5mm, with dimensions of 0.95 x 1.2mm and a drilled hole diameter of 1.6 (+0.1)mm. It features THT PCB contact with an in-line solder pin arrangement and four solder pins per potential. The part is gray, made from Polyamide (PA66) with a flammability class of UL94 V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 1.518MJ and weighs 75.3g. Designed to operate within a temperature range of -60 to +105°C, it is RoHS compliant without exemptions. Packaged in boxes of 10 pieces, it is manufactured in Poland with a GTIN of 4045454739461 and a customs tariff number of 85369010000.