741-110 WAGO Industrial Automation Components

WAGO 741-110 is an automation part with a short circuit breaking rating and electrical data ratings per IEC/EN 60664-1, including a nominal voltage (III/3) of 250V, rated impulse voltage (III/3) of 4kV, rated voltage (III/2) of 320V, rated impulse voltage (III/2) of 4kV, nominal voltage (II/2) of 630V, rated surge voltage (II/2) of 4kV, and a rated current of 16A. It features UL 1059 approval with rated voltages of 300V and rated currents of 10A for both Use Group B and D, as well as CSA approval with a rated voltage of 300V and rated currents of 16A for Use Group B and 10A for Use Group D. The part includes 10 connection points, a single connection type with CAGE CLAMP technology, push-button actuation, and accommodates solid and fine-stranded conductors ranging from 0.08 to 2.5mm2 / 28 to 12 AWG, including fine-stranded conductors with both insulated and uninsulated ferrules. The strip length is 5 to 6mm / 0.2 to 0.24 inches, and the conductor connection direction to PCB is 0°. It has a pole number of 10, pin spacing of 5mm / 0.197 inches, dimensions of 51.5mm width, 22.5mm height, 18.5mm height from the surface, and 12.8mm depth. The solder pin length is 4mm, with dimensions of 0.7 x 0.7mm, and a drilled hole diameter with tolerance of 1.1 (+0.1)mm. The PCB contact is THT with an in-line solder pin arrangement and two solder pins per potential. It is made from Polyamide (PA66) in gray, with a flammability class per UL94 of V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. The fire load is 0.27MJ, and it weighs 13.1g. It operates within a temperature range of -60 to +105°C, is RoHS compliant without exemption, and comes in a box packaging with 80 pieces per unit (20 pieces per SPU). The country of origin is CH, with a GTIN of 4044918679664 and a customs tariff number of 85369010000.