858-158 WAGO Industrial Automation Components

WAGO 858-158 is an automation part with a nominal input voltage of AC 120V and a nominal input current at UN of 10mA in the control circuit. It features four changeover/switchover contacts in the load circuit, with contact material made of AgCe. The limiting continuous current is 5A, with a maximum inrush current (resistive) of AC 15A for 4 seconds. The maximum switching voltage is AC 250V, and the maximum switching power (resistive) is AC 1250 VA; for DC, refer to the load limit curve. The recommended minimum load is 12V / 100mA. The pull-in and drop-out times are typically 25ms, with a bounce time of 4ms. It has an electrical life of 100,000 switching operations at 23°C and a mechanical life of 20,000,000 switching operations. The status indicator is a red LED with a mechanical indicator. It offers a dielectric strength of 1.5kVrms between control and load circuits, 1kVrms across open contacts, and 1.5kVrms between load circuits, all for 1 minute. The protection type is IP20. Physically, it measures 21.5mm in width, 35mm in height from the surface, and 28mm in depth, with a weight of 34.2g. It is designed for pluggable module mounting. The operational ambient temperature range is -25 to +70°C, and the storage temperature range is -40 to +80°C. It meets the EN 61810-1 standard and falls under Product Group 6 (INTERFACE ELECTRONIC), with eClass 10.0 and 9.0 classifications of 27-37-16-01, and ETIM 8.0 and 7.0 classifications of EC001437. The packaging unit is 3 pieces per box, with the country of origin being China. The GTIN is 4055143532044, and the customs tariff number is 85364190890. It is RoHS compliant without exemptions.