LE550IQP Banner Measurement Sensors
Part#:LE550IQP
Alt. Part#:86747
Manufacturer:Banner
Category:Measurement Sensors
Product Lifecycle:Active
Product description
Laser Displacement Sensor; Range: 100-1000 mm; Input: 12-30 V dc; Output: Analog: 4-20 mA; Discrete: NPN/PNP Configurable; 150 mm (6 in) M12 Pigtail QD
Product Details
- Weight 86.18248 g
- Country Of Origin US
- Sensing Mode (General) Proximity
- Connection Pigtail QD
- Min Operating Temperature (°C) -20
- Remote Teach and Laser Control Input Impedence 18 kΩ min. (65 kΩ min at 5 V dc)
- Feature: Chemical Resistant No
- 1-wire Serial Interface No
- Max Measurement Range >500 mm - <=1000 mm
- Primary Housing Material Zinc Alloy Die-Cast
- Power Supply 12-30 V dc
- Max Discrete (Switched) Output (mA) 100
- Max Op. Relative Humidity Non-Condensing (%) 90 at 55°C
- Sensing Mode (Detailed) Triangulation
- Quick Disconnect Type M12 (Euro)
- Sensing Beam Wavelength (nm) 650
- IP Rating IP67
- Minimum Response Time (ms) 2
- Power/Current Consumption (exclusive of load) 70 mA @ 24 V dc
- Cable Length (m) 0.15
- Input/Output Analog & Discrete
- Delay at Power-up (ms) 2000
- Output Saturation Voltage PNP Outputs < 3 V at 100 mA
- Storage Temperature (°C) -30 to 65
- Spot Size (@ Reference Distance) 4.9 mm x 12.1 mm @ 1 m
- Feature: Timing (Hold/Delay) Yes
- PC Configurable No
- Max Sensing Distance (mm) 1000
- Mechanical Shock IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
- Discrete (Switched) Outputs 1 NPN/PNP Configurable
- Analog Linearity (mm) Linearity is the lesser of Accuracy or 0.5% of full scale range (± 4.5 mm) at any given distance
- Power DC
- Analog Resolution/Discrete Repeatability 100 mm to 600 mm: < 0.5; 600 mm to 1000 mm: < 1
- Adjustments Push Button; Remote Teach
- Analog Current Output Rating 1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
- Warm-up Time (minutes) 10
- Laser Control Yes
- Common Ethernet Protocol No
- Max Ambient Light (Lux) 10000
- RS-422 No
- Device Type Sensor
- Indicator LCD; LED(s)
- Minimum Sensing Distance (mm) 100
- Number of Pins 5
- NEMA Rating NEMA 6
- Minimum Window Size (mm) 10
- Feature: Remote Teach Yes
- RS-485 No
- Housing Style Rectangular
- Analog Output Configuration 4-20 mA
- Output Saturation Voltage NPN Outputs < 1.6 V at 100 mA
- Vibration MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
- Window Material Acrylic
- Alarm Output (mA) 100
- IO Link No
- Sensing Beam Visible Red Laser
- Laser Classification Class 2
- Temperature Effect (mm/°C) +/- 0.25 mm/°C from 100 to 600 mm, +/- 0.5 mm/°C at 1000 mm
- Output Protection Protected against continuous overload and short circuit
- Max Operating Temperature (°C) 55
- Max Off-state Leakage Current (µA) NPN: < 200 at 30 V dc; PNP: < 10 at 30 V dc
- PROFINET No
- Discrete Output Hysteresis (mm) Automatically adjusted
- Supply Protection Circuitry Protected against reverse polarity and transient overvoltages
- RS-232 No
- Profibus No
- Feature: Health/ Marginal Signal Output Yes
- Wireless No
- SSI No
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LE550IQP on Powermatic Associates is $838.00. Order now.
About the product
Banner Engineering LE550IQP is a Class 2 laser displacement sensor/transmitter designed for precise measurement tasks. It operates on a triangulation system with an LCD display for easy setup and TEACH mode for simplified programming. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection. It features a rectangular shape with a robust die-cast zinc alloy housing and an acrylic window. The LE550IQP is pre-wired with a 6" / 150mm pigtail that terminates with a 5-pin Euro-style M12 connector. It offers protection against overload and short-circuit conditions. The sensor requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal. It can operate in ambient air temperatures ranging from -20 to +55 °C and is rated IP67 and NEMA 6 for protection against dust and water ingress. The LE550IQP provides one analog output (4-20mA) and one digital output (PNP/NPN transistor), with a sensing distance of 10cm to 1m.
LE550IQP Related Documents
Manufacturer warranty
LE550IQP Banner
$838.00
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$838.00
$838.00 each
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
About the manufacturer
Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...
Recently viewed products
Relevant products
FAQ
What is the price of LE550IQP?
Purchase the LE550IQP from Powermatic Associates at the price of $838.00. Order today.
Out if stock but available for backorder.
Laser Displacement Sensor; Range: 100-1000 mm; Input: 12-30 V dc; Output: Analog: 4-20 mA; Discrete: NPN/PNP Configurable; 150 mm (6 in) M12 Pigtail QD
What can I help you find today?
