Powermatic Associates Logo

Q40SN6FF600 W/30 Banner Electronic Components

Q40SN6FF600 W/30 on Powermatic Associates
Banner

Part#:Q40SN6FF600 W/30

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Range: 600 mm; Input: 10-30V dc

Product Details

  • Barrel Diameter (mm)
    30
  • DeviceNet
    No
  • IO Link
    No
  • Indicator
    LEDs
  • Feature: Health/ Marginal Signal Output
    Yes
  • Feature: Chemical Resistant
    No
  • Feature: Audible
    No
  • Feature: Hazardous Area
    No
  • Feature: Encapsulated
    Yes
  • Feature: Timing (Hold/Delay)
    No
  • Feature: Ecolab Certified
    Yes
  • Opposed Mode Emitter/Receiver
    N/A
  • IP Rating
    IP67
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • Adjustments
    N/A
  • NEMA Rating
    NEMA 6P
  • Lens Material
    Polycarbonate
  • Repeatability (µs)
    750
  • Number of Pins
    4
  • Delay at Power-up (ms)
    100
  • Special Feature: Water Detection
    No
  • Special Feature: Remote Teach
    No
  • Output response time (ms)
    3
  • Power Supply/Supply Voltage
    10-30 V dc
  • Max Op. Temp. (°C)
    70
  • Quick Disconnect Type
    No QD
  • Special Feature: Intrinsically Safe
    No
  • Min Op. Temp. (°C)
    -40
  • Operation
    Light/Dark Operate
  • Connection
    Cable
  • Outputs
    NPN
  • Cable Length (m)
    9
  • Sensing Beam
    Infrared LED
  • Primary Housing Material
    Thermoplastic
  • Housing Style
    Rectangular
  • Input/Output
    Discrete
  • Max Sensing Distance (mm)
    600
  • Sensing Mode (Detailed)
    Background Suppression (Fixed)
  • Sensing Mode (General)
    Proximity
  • Power
    DC

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Q40SN6FF600 W/30 Related Documents

Q40 Series, dc models-1630949418324.pdf

Similar products from: Banner Electronic Components

T18SP6R on Powermatic Associates

T18SP6R

Banner

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

4 in stock
WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock
T18SN6R W/30 on Powermatic Associates

T18SN6R W/30

Banner

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featuring a through-beam system in an opposed mode configuration. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It comes pre-wired with a 30ft / 9m cable that terminates with bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. This model boasts an IP67, IP69K, and NEMA 6P degree of protection, ensuring durability in various environmental conditions. The T18SN6R W/30 has a cylindrical M18 threaded/barrel shape, includes 1 x digital output (NPN transistor), and offers a sensing distance of up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

1 in stock

Manufacturer warranty

Q40SN6FF600 W/30 Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare Q40SN6FF600 W/30 with other Electronic Components products

Barrel Diameter (mm)

DeviceNet

IO Link

Indicator

Feature: Health/ Marginal...

Feature: Chemical Resista...

Feature: Audible

Feature: Hazardous Area

Feature: Encapsulated

Feature: Timing (Hold/Del...

Selected product

Q40SN6FF600 W/30
Backordered
Q40SN6FF600 W/30
Banner

Range: 600 mm; Input: 10-30V dc

Barrel Diameter (mm)30

DeviceNetNo

IO LinkNo

IndicatorLEDs

Feature: Health/ Marginal Signal OutputYes

Feature: Chemical ResistantNo

Feature: AudibleNo

Feature: Hazardous AreaNo

Feature: EncapsulatedYes

Feature: Timing (Hold/Delay)No

T18SN6R W/30
1 in stock
T18SN6R W/30
Banner

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featu...

Barrel Diameter (mm)-

DeviceNet-

IO Link-

Indicator-

Feature: Health/ Marginal Signal Output-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Hazardous Area-

Feature: Encapsulated-

Feature: Timing (Hold/Delay)-

T18SP6R
4 in stock
T18SP6R
Banner

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications,...

Barrel Diameter (mm)-

DeviceNet-

IO Link-

Indicator-

Feature: Health/ Marginal Signal Output-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Hazardous Area-

Feature: Encapsulated-

Feature: Timing (Hold/Delay)-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

BGA34060Y on Powermatic Associates

BGA34060Y

Schneider Electric

Square D by Schneider Electric BGA34060Y is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BGA sub-range, featuring a PowerPact B-Frame 100 TMD 3P 60A 480Y/277Vac 35kA I-line design. It has a rated impulse voltage (Uimp) of 8 kV and utilizes an I-line connection for ABC phases. With a degree of protection rated at IP40, this MCCB has a rated current of 60A and supports a rated voltage (AC) of 480Vac and 480Y/277Vac. It is designed for mechanical durability of 20,000 operations at no load and offers a mounting mode that mounts on I-line with line side isolated plug-on jaws plus a mechanical I-Line bracket mechanism for robust attachment. The unit features 3 poles (3P), with dimensions of 137 mm in height, 89 mm in depth, and 81 mm in width. It falls under utilisation category A and offers protection settings including over-current fixed at 60A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. Protection functions include thermal protection for overload and magnetic protection for short-circuit, with a trip current rating of 60 AT. Its electrical durability with load is rated for 10,000 operations at 440Vac; In, and it has a frame current rating of 100 AF. The operating mode is toggle (manual), and it has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 14kA at 600Y/347Vac, and 20kA at 250Vdc, all in accordance with UL489. The trip unit type is thermal-magnetic (fixed) with no display.

0 in stock

Relevant products

Q40SN6LP W/30 on Powermatic Associates

Q40SN6LP W/30

Verified stock: 0

Banner Engineering Q40SN6LP W/30 is a polarized photo-electric sensor designed for retro-reflective mode operation. It features an M30 threaded mount for secure installation and is equipped with a pre-wired 30ft / 9m cable that terminates with bare end flying leads for easy connection. This sensor operates within an ambient air temperature range of -40 to +70°C and is housed in a durable thermoplastic material. It belongs to the Q40 DC series and offers a sensing distance of up to 6m with a visible red light source at a wavelength of 680 nm. The Q40SN6LP W/30 supports both Light-ON and Dark-ON operating modes and provides a digital output (NPN transistor; complementary NO/NC) with a quick response time of 3ms / 0.003 s. It requires a supply voltage of 10Vdc-30Vdc (12Vdc / 24Vdc nom.) and is protected to IP67 NEMA 6P standards, ensuring its operation in challenging environments.

Banner

FAQ

Out if stock but available for backorder.

Range: 600 mm; Input: 10-30V dc

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock