Q456E W/30 Banner Electronic Components

Name: Q456E W/30
Brand: Banner

Part#:Q456E W/30

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Banner Engineering Q456E W/30 is a photo-electric sensor designed for through-beam system applications, functioning as an emitter within the Q45BB6 series. This sensor features an M30 threaded mount for secure installation and is equipped with a pre-wired 30ft / 9m cable that terminates with bare end flying leads for easy connection. It operates within an ambient air temperature range of -40 to +70°C and is housed in a thermoplastic casing with an acrylic lens, ensuring durability. The Q456E W/30 offers a sensing distance of up to 60m and utilizes infrared light with a wavelength of 880 nm for detection. It is powered by a supply voltage ranging from 10Vdc to 30Vdc, with 12Vdc and 24Vdc as nominal values. This sensor is designed to provide a high degree of protection, rated at IP67 and NEMA 6P, against ingress from dust and water.

Product Details

Connection
Cable
Sensing Beam
Infrared LED
Special Feature: Water Detection
No
Indicator
LEDs
Primary Housing Material
Thermoplastic
Max Op. Temp. (°C)
70
NEMA Rating
NEMA 6P
Feature: Audible
No
Power
DC
Operation
N/A
Number of Pins
2
Feature: Timing (Hold/Delay)
No
Sensing Mode (Detailed)
Emitter
Special Feature: Intrinsically Safe
No
Max Op. Relative Humidity [%]
90% @ 50°C
Feature: Chemical Resistant
No
Delay at Power-up (ms)
N/A
Min Op. Temp. (°C)
-40
Feature: Encapsulated
No
Cable Length (m)
9

Special Feature: Remote Teach

Adjustments

N/A

DeviceNet

Max Sensing Distance (mm)

60000

Barrel Diameter (mm)

Housing Style

Rectangular

Quick Disconnect Type

No QD

IP Rating

IP67

Feature: Hazardous Area

Outputs

N/A

Output response time (ms)

N/A

Lens Material

Acrylic

IO Link

Power Supply/Supply Voltage

10-30 V dc

Sensing Mode (General)

Opposed

Repeatability (µs)

250

Opposed Mode Emitter/Receiver

Emitter

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Q456E W/30 Related Documents

Q45 Series, dc models (Solid-State Output)-Multilingual-1630949483361.pdf Q45 Series, dc models (Solid-State Outputs)-1630949483363.pdf

Similar products from: Banner Electronic Components

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock

Manufacturer warranty

Q456E W/30 Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare Q456E W/30 with other Electronic Components products

Connection

Sensing Beam

Special Feature: Water De...

Indicator

Primary Housing Material

Max Op. Temp. (°C)

NEMA Rating

Feature: Audible

Power

Operation

Selected product

Backordered

Q456E W/30

Banner

Banner Engineering Q456E W/30 is a photo-electric sensor designed for through-beam system applicatio...

ConnectionCable

Sensing BeamInfrared LED

Special Feature: Water DetectionNo

IndicatorLEDs

Primary Housing MaterialThermoplastic

Max Op. Temp. (°C)70

NEMA RatingNEMA 6P

Feature: AudibleNo

PowerDC

OperationN/A

4 in stock

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for...

ConnectionIntegral QD

Sensing Beam-

Special Feature: Water Detection-

Indicator-

Primary Housing MaterialPBT

Max Op. Temp. (°C)-

NEMA Rating-

Feature: Audible-

PowerDC

Operation-

2 in stock

ZS-38-3L

SMC

Cable; Lead Wire With Connector; Type-3 Cores; 1 Output; 2M

Connection-

Sensing Beam-

Special Feature: Water Detection-

Indicator-

Primary Housing Material-

Max Op. Temp. (°C)-

NEMA Rating-

Feature: Audible-

Power-

Operation-

About the manufacturer

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

LC1D126BL

Schneider Electric

Schneider Electric LC1D126BL is a magnetic contactor from the Deca sub-range designed with a low-consumption coil (<2.4W) and ring-lugs connections. This 3-pole (3P; 3NO) contactor supports a rated current of 25A (AC-1) and 12A (440Vac; AC-3), and is suitable for DIN rail mounting. It features a net width of 45 mm and offers a degree of protection of IP20. The control voltage (DC) ranges from 19.2-30Vdc (24Vdc nom.; 0.8...1.25 x Uc), with a rated operating voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV, and it has a rated active power ranging from 3kW (220-230Vac; AC-3) to 7.5kW (660-690Vac; AC-3). The rated power (HP) varies from 0.5HP (115Vac; single-phase) to 10HP (575-600Vac; 3-phase), under UL/CSA standards. This contactor is designed for mechanical durability of 15 million operations at no load and electrical durability of 2 million operations with load, with a power consumption of 2.4 W.

0 in stock

RK 4.5T-10-RS 4.5T/S679/S1587

Turck

RK 4.5T-10-RS 4.5T/S679/S1587 Turck - RK 4.5T-10-RS 4.5T/S679/S1587 Actuator and Sensor Cordset, Extension Cordset

0 in stock

9001KS52FBH37

Schneider Electric

Schneider Electric 9001KS52FBH37 is a selector switch designed for use with a gloved hand or with a long handle, featuring a metal (chromium-plated) bezel. It is rated for IP66, NEMA 1, 2, 3, 3R, 4, 12, and 13, indicating a high level of protection against dust, water, and other environmental conditions. The switch operates at a network frequency of 9001K, with a net height of 2.5 kV and a diameter of 600 V. It offers a 3-position, spring-return to center mechanism and has an electrical durability of 500,000 operations with a silver alloy (Ag / Ni) contact material. The primary voltage is rated at 30 mm, with a type of lens at 1.18 inches and a screw-clamp trip unit type. It supports an earthing system with a rated thermal current (Ith) of 10 A and a control circuit rated current of AC-15 3 A at 240Vac and DC-13 0.55 A at 125Vdc. The selector switch weighs 0.55 A and can operate within a temperature range of -70°C to +70°C.

0 in stock

SU-7

Panasonic

Panasonic SU-7 is an amplifier designed for sensor applications, featuring an interference prevention function and an OFF-delay/ON-delay timer adjustable from 0 to 5 seconds. It is constructed with a polycarbonate case cover and an ABS housing that is heat resistant. This part is pre-wired with a 2-meter 6-core cable for connectivity and operates within an ambient air temperature range of -10 to +55°C. It includes 6 circuits within the cable and offers 2 digital outputs, both NPN open-collector type, capable of 24Vdc at 100mA, with one designated for self-diagnosis output. The SU-7 has a current consumption of 35mA or 0.035 A and features a visual position indicator with a red LED for operation and a green LED for stability. It is equipped with output short-circuit protection, has a response time of 600µs or 0.0006 seconds, and can operate in either Light-ON or Dark-ON mode. The time delay function can be set anywhere from 0 to 5 seconds.

0 in stock

K50UX1CRA

Banner

K50 Ultrasonic Sensor; 1-Wire Serial Interface; Range: 300 mm - 3 m (11.8 in to 118 in); 230 mm (9 in) M12 Pigtail QD

0 in stock

LC1D126BL

Schneider Electric

0 in stock

9001KS52FBH37

Schneider Electric

0 in stock

SU-7

Panasonic

0 in stock

LC1D126BL

Schneider Electric

0 in stock

Relevant products

Q456E

Verified stock: 0

Q45 Series: Emitter; Range: 60 m; Input: 10-30 V dc; Output: Not Applicable; 2 m (6.5 ft) Cable

Banner

Q456EFQ5

Verified stock: 0

Q456EFQ5 10-30 V DC M12 STANDARD

Banner

Q456EQ5

Verified stock: 0

Q45 Series: Emitter; Range: 60 m; Input: 10-30 V dc; Output: Not Applicable; 4-pin M12 Integral QD

Banner

Q456EQ5-72079

Verified stock: 0

Q456EQ5-72079 EXTRA POTTING/SPACERS; 4-pin M12 Integral QD M12

Banner

Q456E W-30

Verified stock: 0

Photo-electric emitter with through-beam system / opposed mode - Banner Engineering (Q series - Q45BB6) - Part #38472 - Infrared (IR) light (880nm) - Supply voltage 10Vdc-30Vdc (12Vdc / 24Vdc nom.) - Pre-wired with 30ft / 9m cable terminated with bare end

Banner

FAQ

Out if stock but available for backorder.