PDG13F0025TFFKNNNNXI Eaton Industrial Automation Components

WK 4.4T-10/S90

Turck

WK 4.4T-10/S90 Turck - WK 4.4T-10/S90 Actuator and Sensor Cordset, Connection Cordset

HOM2175SB

Schneider Electric

Square D by Schneider Electric HOM2175SB is a load center designed for use with a secondary surge arrestor. It has a rated current of 5A and operates at a rated voltage of 120Vac/240Vac. This load center is protected by a NEMA 1 enclosure and is suitable for single-phase (1PH) electrical networks.

LMHCE572C

Novanta IMS

Novanta IMS LMHCE572C is a stepper motor within the high-torque stepper motors sub-range, featuring an integrated driver and a high-torque DC stepper motor. It is designed with an incremental magnetic encoder, double (2) motor stack, and operates on closed-loop hMTechnology. The connection types include a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting Ethernet/IP and Modbus TCP communication protocols. The supply voltage ranges from 12Vdc to 60Vdc, with optimal performance at 24Vdc and 48Vdc. It is mounted via a 57x57mm flange and offers a degree of protection rated at IP65. The moment of inertia is 0.22kg.cm^2, with a stall torque of 186N.cm and a resolution of a 1.8° step angle.

1451-49-RA

ABB Control

ABB Control - 1451-49-RA

RKC 4.5T-3-RSM 50/S90/S3570

Turck

RKC 4.5T-3-RSM 50/S90/S3570 Turck - RKC 4.5T-3-RSM 50/S90/S3570 Actuator and Sensor Cordset, Extension Cordset

RSM RKM 48A-50M

Turck

601403

Lapp

601403 Lapp - ÖLFLEX 190 3G2.5 14/3C

MDI1FRD23A7-N

Novanta IMS

Novanta IMS MDI1FRD23A7-N is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase DC stepper motor design. It includes a rear control knob and a single motor stack in its Plus version, which encompasses standard features. This part offers a connection through 30cm / 12" bare end flying leads with a 10-pin IDC non-locking connector. It supports RS-422 and RS-485 communication protocols. The supply voltage requirement ranges from 12Vdc to 75Vdc, with optimal performance at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with a 57x57mm flange. The operational ambient air temperature range is from 0 to +85°C. It has an IP20 degree of protection, a moment of inertia of 0.18kg.cm^2, a stall torque of 64N.cm, and a resolution characterized by a 1.8° step angle.

WK 4.4T-10/S90

Turck

WK 4.4T-10/S90 Turck - WK 4.4T-10/S90 Actuator and Sensor Cordset, Connection Cordset

HOM2175SB

Schneider Electric

Square D by Schneider Electric HOM2175SB is a load center designed for use with a secondary surge arrestor. It has a rated current of 5A and operates at a rated voltage of 120Vac/240Vac. This load center is protected by a NEMA 1 enclosure and is suitable for single-phase (1PH) electrical networks.

LMHCE572C

Novanta IMS

Novanta IMS LMHCE572C is a stepper motor within the high-torque stepper motors sub-range, featuring an integrated driver and a high-torque DC stepper motor. It is designed with an incremental magnetic encoder, double (2) motor stack, and operates on closed-loop hMTechnology. The connection types include a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting Ethernet/IP and Modbus TCP communication protocols. The supply voltage ranges from 12Vdc to 60Vdc, with optimal performance at 24Vdc and 48Vdc. It is mounted via a 57x57mm flange and offers a degree of protection rated at IP65. The moment of inertia is 0.22kg.cm^2, with a stall torque of 186N.cm and a resolution of a 1.8° step angle.

1451-49-RA

ABB Control

ABB Control - 1451-49-RA