547090 Festo Directional Control Valves

Product Details

• Operating pressure
  2 bar ... 10 bar
• Pneumatic working port
  Sub-base, size 26 mm as per ISO 15407-1 G1/4
• Type code
  VSVA
• Degree of protection
  IP65 NEMA 4
• Valve function
  2x3/2, open, monostable
• Design
  Piston gate valve
• Coil characteristics
  24 V AC: 50/60 Hz, initial power 3.1 VA, holding power 2.3 VA
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Ambient temperature
  -5 °C ... 50 °C
• Auxiliary pilot air port 12
  Sub-base, size 26 mm as per ISO 15407-1
• Pneumatic connection 2
  Sub-base, size 26 mm as per ISO 15407-1
• Seals material
  HNBR NBR
• Pilot pressure MPa
  0.3 MPa ... 1 MPa
• Valve size
  26 mm
• Reset method
  Pneumatic spring
• Mounting position
  Any
• Pilot air supply port
  Internal
• Temperature of medium
  -5 °C ... 50 °C
• Max. tightening torque for valve mounting
  2 Nm
• Pneumatic connection 1
  Sub-base, size 26 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Operating voltage
24V AC
Nominal width
9 mm
Manual override
Non-detenting
Symbol
00992809
Flow rate of pneumatic valve
1250 l/min
Switching time off
28 ms
Permissible voltage fluctuations
-15 % / +10 %
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Noise level
85 dB(A)
Electrical connection
Form C Without PE conductor
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Pneumatic connection 4
Sub-base, size 26 mm as per ISO 15407-1
Housing material
Die-cast aluminum
Lap
Overlap
Standard nominal flow rate
900 l/min
Actuation type
Electrical
Exhaust air function
With flow control option
Sealing principle
Soft
Type of control
Pilot-controlled
Signal status display
LED
Optimized flow rate of pneumatic valve pneumatically concatenated flow
900 l/min
Duty cycle
100%
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Type of mounting
On sub-base
Pneumatic connection 5
Sub-base, size 26 mm as per ISO 15407-1
Conforms to standard
ISO 15407-1 VDMA 24563
Flow direction
Non-reversible
Pilot pressure
3 bar ... 10 bar
Flow rate of pneumatic valve on individual sub-base
1000 l/min
On switching time
20 ms
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
0 - No corrosion stress
Relative air humidity
0 - 90 %
Product weight
305 g
Auxiliary pilot air port 14
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 3
Sub-base, size 26 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Material of screws
Steel Galvanized

547090 Related Documents