547106 Festo Directional Control Valves

Product Details

• Actuation type
  Electrical
• Reset method
  Mechanical spring
• Nominal width
  9 mm
• Flow direction
  Non-reversible
• Optimized flow rate of pneumatic valve pneumatically concatenated flow
  1000 l/min
• Duty cycle
  100%
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Noise level
  85 dB(A)
• Product weight
  305 g
• Auxiliary pilot air port 12
  Sub-base, size 26 mm as per ISO 15407-1
• Seals material
  HNBR NBR
• Valve size
  26 mm
• Design
  Piston gate valve
• Exhaust air function
  With flow control option
• Conforms to standard
  ISO 15407-1 VDMA 24563
• Pilot pressure
  3 bar ... 10 bar
• Flow rate of pneumatic valve
  1400 l/min
• Permissible voltage fluctuations
  -15 % / +10 %
• Ambient temperature
  -5 °C ... 50 °C
• Electrical connection
  Form C Without PE conductor
Pneumatic connection 1
Sub-base, size 26 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Valve function
5/3, closed
Standard nominal flow rate
1000 l/min
Degree of protection
IP65 NEMA 4
Mounting position
Any
Symbol
00991080
Flow rate of pneumatic valve on individual sub-base
1100 l/min
Changeover time
35 ms
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Temperature of medium
-5 °C ... 50 °C
Type of mounting
On sub-base
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Pneumatic connection 4
Sub-base, size 26 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Housing material
Die-cast aluminum
Operating pressure
3 bar ... 10 bar
Operating voltage
24V AC
Sealing principle
Soft
Manual override
Non-detenting
Signal status display
LED
Switching time off
58 ms
Coil characteristics
24 V AC: 50/60 Hz, initial power 3.1 VA, holding power 2.3 VA
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Relative air humidity
0 - 90 %
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Pneumatic connection 3
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 5
Sub-base, size 26 mm as per ISO 15407-1
Lap
Overlap
Pilot pressure MPa
0.3 MPa ... 1 MPa
Pneumatic working port
Sub-base, size 26 mm as per ISO 15407-1 G1/4
Type code
VSVA
Type of control
Pilot-controlled
Pilot air supply port
Internal
On switching time
23 ms
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. tightening torque for valve mounting
2 Nm
Auxiliary pilot air port 14
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 2
Sub-base, size 26 mm as per ISO 15407-1
Material of screws
Steel Galvanized

547106 Related Documents