547204 Festo Directional Control Valves

Product Details

• Lap
  Overlap
• Actuation type
  Electrical
• Design
  Piston gate valve
• Type code
  VSVA
• Type of control
  Pilot-controlled
• Pilot air supply port
  External
• Optimized flow rate of pneumatic valve pneumatically concatenated flow
  1000 l/min
• Switching time off
  58 ms
• Coil characteristics
  110 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Pilot medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Product weight
  305 g
• Electrical connection
  Form C as per DIN EN 175301-803
• Pneumatic connection 3
  Sub-base, size 26 mm as per ISO 15407-1
• Operating pressure
  -0.9 bar ... 16 bar
• Standard nominal flow rate
  1000 l/min
• Nominal width
  9 mm
• Sealing principle
  Soft
• Pilot pressure
  3 bar ... 10 bar
• Flow rate of pneumatic valve on individual sub-base
  1100 l/min
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. tightening torque for valve mounting
2 Nm
Auxiliary pilot air port 12
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 2
Sub-base, size 26 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Pneumatic working port
Sub-base, size 26 mm as per ISO 15407-1 G1/4
Exhaust air function
With flow control option
Manual override
Non-detenting
Flow direction
Reversible
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU low voltage directive
Ambient temperature
-5 °C ... 50 °C
Auxiliary pilot air port 14
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 4
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 5
Sub-base, size 26 mm as per ISO 15407-1
Valve function
5/3, exhausted
Valve size
26 mm
Reset method
Mechanical spring
Conforms to standard
ISO 15407-1 VDMA 24563
Signal status display
LED
Flow rate of pneumatic valve
1400 l/min
On switching time
23 ms
Permissible voltage fluctuations
-15 % / +10 %
Corrosion resistance class (CRC)
0 - No corrosion stress
Temperature of medium
-5 °C ... 50 °C
Relative air humidity
0 - 90 %
Type of mounting
On sub-base
Pneumatic connection 1
Sub-base, size 26 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Material of screws
Steel Galvanized
Pilot pressure MPa
0.3 MPa ... 1 MPa
Operating voltage
110V AC
Degree of protection
IP65 NEMA 4
Mounting position
Any
Symbol
00992939
Changeover time
35 ms
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Noise level
85 dB(A)
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Seals material
HNBR NBR
Housing material
Die-cast aluminum

547204 Related Documents