Powermatic Associates Logo

551484 Festo Pneumatic Tubing

551484 on Powermatic Associates
Festo

Part#:551484

Alt. Part#:PEN-12X1,75-GE

Manufacturer:Festo

Category:Pneumatic Tubing

Product Lifecycle:Active

Product description

plastic tubing PEN-12X1,75-GE standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outside diameter: 12 mm, Bending radius relevant for flow rate: 58 mm, Inside diameter: 8,4 mm, Min. bending radius: 33 mm

Product Details

  • Pneumatic tubing test conditions
    Suitability for energy chains: >5 million cycles as per FN 942021
  • Bending radius relevant for flow rate
    58 mm
  • Min. bending radius
    33 mm
  • Tubing characteristics
    Suitable for energy chains in applications with high cycle rates
  • Inside diameter
    8.4 mm
  • Ambient temperature
    -30 °C ... 60 °C
  • Material of pneumatic tubing
    PE
  • Certification
    German Technical Control Board (TÜV)
  • Pneumatic connection
    For plug connection outside diameter 12 mm
  • Outside diameter
    12 mm
  • Temperature-dependent operating pressure
    -0.95 bar ... 10 bar
  • Type code
    PEN
  • Product weight by length
    0.05423 kg/m
  • Shore hardness
    D 52 +/-3
  • Color
    Yellow
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com
  • Note on materials
    Free of copper and PTFE RoHS-compliant

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

551484 Related Documents

551484 DataSheet.pdf

Similar products from: Festo Pneumatic Tubing

567965 on Powermatic Associates

567965

Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 5/16, Bending radius relevant for flow rate: 0,121 Fuß, Min. bending radius: 0,065 Fuß, Tubing characteristics: Suitable for energy chai

3540 in stock
159665 on Powermatic Associates

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

150 in stock
567951 on Powermatic Associates

567951

Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 1/2, Bending radius relevant for flow rate: 0,204 Fuß, Min. bending radius: 0,075 Fuß, Tubing characteristics: Suitable for energy chains

1560 in stock
197383 on Powermatic Associates

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for energy

50 in stock
553938 on Powermatic Associates

553938

Festo

plastic tubing PUN-6X1-SW-500 Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. ben

500 in stock
159668 on Powermatic Associates

159668

Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 10 mm, Bending radius relevant for flow rate: 54 mm, Inside diameter: 7 mm, Min. bendi

1650 in stock

Manufacturer warranty

551484 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 551484 with other Pneumatic Tubing products

Pneumatic tubing test con...

Bending radius relevant f...

Min. bending radius

Tubing characteristics

Inside diameter

Ambient temperature

Material of pneumatic tub...

Certification

Pneumatic connection

Outside diameter

Selected product

551484
Backordered
551484
Festo

plastic tubing PEN-12X1,75-GE standard O.D tubing, for QS plug connectors, polyethylene (not approve...

Pneumatic tubing test conditionsSuitability for energy chain...

Bending radius relevant for flow rate58 mm

Min. bending radius33 mm

Tubing characteristicsSuitable for energy chains i...

Inside diameter8.4 mm

Ambient temperature-30 °C ... 60 °C

Material of pneumatic tubingPE

CertificationGerman Technical Control Boa...

Pneumatic connectionFor plug connection outside ...

Outside diameter12 mm

197383
50 in stock
197383
Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside di...

Pneumatic tubing test conditionsSuitability for energy chain...

Bending radius relevant for flow rate16 mm

Min. bending radius8 mm

Tubing characteristicsSuitable for energy chains i...

Inside diameter2.6 mm

Ambient temperature-35 °C ... 60 °C

Material of pneumatic tubing-

CertificationGerman Technical Control Boa...

Pneumatic connection-

Outside diameter4 mm

159665
150 in stock
159665
Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittin...

Pneumatic tubing test conditionsSuitability for energy chain...

Bending radius relevant for flow rate26.5 mm

Min. bending radius16 mm

Tubing characteristicsSuitable for energy chains i...

Inside diameter4 mm

Ambient temperature-35 °C ... 60 °C

Material of pneumatic tubing-

CertificationGerman Technical Control Boa...

Pneumatic connection-

Outside diameter6 mm

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Pneumatic tubing, an essential component of pneumatic systems, carries compressed air or gas between parts. Constructed from durable and flexible materials such as polyurethane and polyamide, it comes in various types to meet different needs, including resistance to wear, corrosion, and other environmental elements. This tubing is indispensable in industries such as automation, manufacturing, and ...

Pneumatic Tubing

Recently viewed products

LGF36600U31XAAUOYH1 on Powermatic Associates

LGF36600U31XAAUOYH1

Schneider Electric

Square D by Schneider Electric LGF36600U31XAAUOYH1 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGF sub-range. It features a factory-installed 24Vdc undervoltage (U/V) trip release coil and a factory-installed 1A/1B (1NO+1NC) auxiliary switch OF wire harness. Designed for PowerPacT L-Frame 600 Micrologic 3.3 (LI), this 3-pole (3P) circuit breaker is rated for 600A and 600Vac, with a busbar rating of 80% and an 18kA busbar. It offers long-time (L) and instantaneous (I) protection functions, with a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. The unit is designed for individual unit mount on plate, with a net height of 382 mm, width of 153 mm, and depth of 171 mm. It has an IP40 degree of protection and operates manually via a toggle. Protection settings include L - Protection against overload adjustable from 0.3 to 1 x In (50A to 150A) and I - Instantaneous protection against short-circuit adjustable from 1.5 to 11 x In (900A to 6600A). The control voltage (AC) specification indicates that the circuit breaker opens instantaneously when the undervoltage trip supply voltage drops between 35% and 70% of its rated control voltage, allowing closing when the supply voltage reaches 85% of rated control voltage. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 600 AT, with a frame current rating of 600 AF. It has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, 18kA at 600Y/347Vac, and 20kA at 500Vdc, all according to UL489 standards. The trip unit type is an electronic Micrologic Standard 3.3 (LI) with LI protection and no display, categorized under utilisation category A.

5 in stock

Relevant products

FAQ

Out if stock but available for backorder.

plastic tubing PEN-12X1,75-GE standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outside diameter: 12 mm, Bending radius relevant for flow rate: 58 mm, Inside diameter: 8,4 mm, Min. bending radius: 33 mm

Similar products from: Pneumatic Tubing

What can I help you find today?

Recommended parts