8005024 Festo Quarter Turn Actuators

Product Details

• Size of valve actuator
  1920
• Swivel angle
  92 deg
• Mounting position
  Any
• Position sensing
  None
• Safety integrity level (SIL)
  Up to SIL 2 high demand mode Up to SIL 2 low demand mode
• Type of (ignition) protection for dust
  Ex h IIIC T85°C...T200°C Db X
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
• Product weight
  43000 g
• Cover material
  Wrought aluminum alloy
• Shaft material
  High-alloy steel
• Mode of operation
  Double-acting
• Operating pressure
  3 bar ... 8.4 bar
• ATEX category for dust
  II 2D
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Torque at nominal operating pressure and 0° swivel angle
  1920 Nm
• Seals material
  FVMQ PTFE-reinforced
• Flange hole pattern
  F14
• Type code
  DAPS
• Design
  Scotch yoke system
• Symbol
  00991265
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Ambient temperature
-50 °C ... 60 °C
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
90.3 l
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Pneumatic connection
G1/4
Material number for shaft
1.4305
Depth shaft connection
48.5 mm
Standard connection for valve
ISO 5211
Closing direction
Clockwise closing
ATEX category gas
II 2G
Explosive ambient temperature
-50°C <= Ta <= +60°C
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Torque at nominal operating pressure and 90° swivel angle
1440 Nm
Material of screws
High-alloy steel
Cushioning
No cushioning
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Nominal operating pressure
5.6 bar
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Torque at nominal operating pressure and 50° swivel angle
960 Nm
Shaft connection
T46
Housing material
Wrought aluminum alloy

8005024 Related Documents