8005067 Festo Quarter Turn Actuators

Product Details

• Size of valve actuator
  0960
• Type code
  DAPS
• Depth shaft connection
  48.5 mm
• Information on the end-position adjusting range
  One end position optionally adjustable
• Position sensing
  None
• Symbol
  00991266
• ATEX category for dust
  II 2D
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Spring return torque at 0° swivel angle
  320 Nm
• Pneumatic connection
  G1/4
• Shaft connection
  T46
• Note on materials
  RoHS-compliant
• Swivel angle
  92 deg
• Design
  Scotch yoke system
• Connection pressure for spring force
  2.8 bar
• Explosive ambient temperature
  -50°C <= Ta <= +60°C
• Spring return torque with 50° swivel angle
  240 Nm
• Cover material
  Wrought aluminum alloy
• Material number for shaft
  1.4305
• Mode of operation
  Single-acting
Cushioning
No cushioning
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Ambient temperature
-20 °C ... 80 °C
Spring return torque with 90° swivel angle
480 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
41.3 l
Material of screws
High-alloy steel
Flange hole pattern
F12 F16
Standard connection for valve
ISO 5211
Mounting position
Any
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
ATEX category gas
II 2G
Operating pressure
2.8 bar ... 8.4 bar
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Spring force
1
Product weight
50600 g
Housing material
Wrought aluminum alloy
Closing direction
Clockwise closing
Nominal operating pressure
5.6 bar
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Seals material
FPM PUR
Shaft material
High-alloy steel

8005067 Related Documents