8083429 Festo Electric Actuators

Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Permissible voltage fluctuations
  +/- 15 %
• Logic input specification
  Based on IEC 61131-2, type 1
• Parameterization interface
  IO-Link® User interface
• Input switching logic
  PNP (positive switching)
• Switching logic at outputs
  PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Homing
  Fixed stop block positive Fixed stop block, negative
• Position sensing
  Motor encoder For proximity sensor
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Power supply, connection pattern
  00995989
• Power supply, type of connection
  Plug
• DC nominal voltage
  24 V
• Nominal current
  3 A
• Insulation protection class
  B
• Relative air humidity
  0 - 90 %
• Rotor position sensor measuring principle
  Magnetic
• Ready status indication
  LED
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
Guide value for payload, horizontal
2 kg
Rotor position sensor resolution
16 bit
IO-Link®, process data width OUT
2 Byte
IO-Link®, Connection technology
Plug
Spindle pitch
8 mm/U
KC characters
KC EMC
Rotor position sensor
Absolute encoder, single-turn
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, connection pattern
00992264
Power supply, number of pins/wires
4
Guide value for payload, vertical
2 kg
Storage temperature
-20 °C ... 60 °C
IO-Link®, SIO mode support
Yes
Protection class
III
IO-Link®, port class
A
Size
32
Mounting position
Any
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Repetition accuracy
±0.015 mm
Logic interface, connection type
Plug
Number of digital logic outputs 24 V DC
2
Logic interface, number of poles/wires
8
IO-Link®, minimum cycle time
1 ms
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
Screw diameter
8 mm
Stroke reserve
0 mm
Spindle type
Ball screw drive
Max. speed
0.18 m/s
Degree of protection
IP40
Fz with theoretical service life of 100 km (from a guide perspective only)
1104 N
My with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Profile material
Wrought aluminum alloy, anodized
Number of digital logic inputs
2
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, communication mode
COM3 (230.4 kBd)
Working stroke
600 mm
Type code
ELGS
Guide
Recirculating ball bearing guide
Max. acceleration
5 m/s²
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iz
45000 mm⁴
Fy with theoretical service life of 100 km (from a guide perspective only)
552 N
Feed constant
8 mm/U
Product weight
1969 g
Material of end caps
Die cast aluminum, painted
Drive cover material
Die cast aluminum, painted
Max. current consumption
3000 mA
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Motor type
Stepper motor
Additional functions
User interface Integrated end-position sensing
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fz
300 N
Max. torque Mx
1.3 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Moving mass
83.4 g
Slide carriage material
Steel
Spindle material
Steel
Design
Electromechanical linear axis With integrated drive
Symbol
00997292
Duty cycle
100%
Certification
RCM compliance mark
2nd moment of area Iy
38000 mm⁴
Max. torque My
1.1 Nm
Mx with theoretical service life of 100 km (from a guide perspective only)
5 Nm
Max. feed force Fx
40 N
Static deflection (load at standstill)
0.1 % of axis length
Cover strip material
High-alloy stainless steel
Spindle nut material
Steel
Max. force Fy
150 N
Max. torque Mz
1.1 Nm
Torsion moment of inertia It
1700 mm⁴
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Steel
Slide material
Die-cast aluminum

8083429 Related Documents