Powermatic Associates Logo

40.52.9.024.0001 Finder Industrial Automation Components

40.52.9.024.0001 on Powermatic Associates
Finder

Part#:40.52.9.024.0001

Manufacturer:Finder

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Finder 40.52.9.024.0001 is a relay with solder pin connections, designed for a variety of applications with a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1). It also operates at 0.6A at 110Vdc and 0.3A at 220Vdc for Normally Open (NO) auxiliary contacts. The supply voltage is specified as 2C/O / DPDT (Double Pole Double Throw), with an ambient air temperature for operation at 750VA (230Vac) and for storage at 2000VA (250Vac). The rated voltage for AC operation is not specified, but the ambient air temperature range is -40 to +85 degrees Celsius. It uses a communication protocol C, with a net width of 24Vdc and a protection function of 250Vac. The net depth is 25 mm, and the control voltage for AC is rated at 6 kV. It is designed for PCB or plug-in mounting with a 29 mm mounting mode, 2 poles, and a power consumption of 0.65 W. The visual position indicator has a 5.3mm pins pitch, and it is capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The length is specified for the material AgNi (Silver Nickel), with a diameter indicating high durability in its operational life cycle.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Finder Industrial Automation Components

58.33.9.024.0050SPA on Powermatic Associates

58.33.9.024.0050SPA

Finder

Finder 58.33.9.024.0050SPA is a relay with a box-clamp connection type, designed to handle rated currents of 10A at 250Vac (AC-1), 10A at 30Vdc (DC-1), 0.25A at 110Vdc (DC-1), and 0.12A at 220Vdc (DC-1) with normally open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O / 3PDT (3 Pole Double Throw), capable of handling ambient air temperatures for operation and storage of -40 to +70 degrees Celsius. The relay supports a communication protocol of type C, with a control voltage (AC) of 3.6 kV and is designed for mounting on a DIN rail or as a plug-in unit. It features a protection function with a rated voltage of 250Vac, a rated active power of 3 poles, and includes a diode coil EMC surge suppressor module. The contact material is AgNi (Silver Nickel), and it has a cross-section suitable for various applications.

10 in stock
34.51.7.024.5010 on Powermatic Associates

34.51.7.024.5010

Finder

Finder 34.51.7.024.5010 is a relay with a solder pin connection type, designed for a variety of applications. It has a rated current of 6A at 250Vac (AC-1), 3A at 30Vdc, 0.2A at 110Vdc, and 0.12A at 220Vdc for DC-1 operations. The relay features normally open (NO) auxiliary contacts and is suitable for use with a supply voltage of 1C/O / SPDT (Single Pole Double Throw). It operates within an ambient air temperature range of -40 to +85 degrees Celsius and has a control voltage (AC) of 6 kV. The rated active power is specified for 1 Pole(s), with a net width of 24Vdc. It offers protection functions at 250Vac and has a response time of 0.17 W. The relay is capable of 60,000 operations and is constructed with AgNi+Au (gold-plated silver-nickel) contacts, ensuring compatibility with PCB and plug-in mounting.

9 in stock
96.04 on Powermatic Associates

96.04

Finder

DIN -Rail/Panel mount screw terminal (Box Clamp) socket for 56.34 relay (blue)

8 in stock
94.02 on Powermatic Associates

94.02

Finder

DIN -Rail/Panel mount screw terminal (Box Clamp) socket for 55.32 relay (blue)

1 in stock
95.01 on Powermatic Associates

95.01

Finder

RETAINING CLIP FOR RELAYS

193 in stock
66.82.8.120.0300 on Powermatic Associates

66.82.8.120.0300

Finder

Finder 66.82.8.120.0300 is a relay designed with 2 Normally Open (NO) poles and features a connection type of Fast-on 250. It supports a rated current of 30A at 250Vac (AC-1), 25A at 30Vdc (DC-1), 0.7A at 110Vdc (DC-1), and 0.3A at 220Vdc (DC-1) for Normally Open (NO) auxiliary contacts. The supply voltage is specified for 2NO / DPST-NO configurations, with an ambient air temperature for operation at 1200VA (230Vac) and for storage at 7500VA (250Vac). The rated voltage for AC operation is not specified, but the control voltage (AC) is rated at 4 kV. It has a net depth of 31 mm, a mounting mode length of 68.5 mm, and a power consumption width of 33.5 mm. The color is indicated for 120Vac (50Hz/60Hz) operations. The relay is designed for rear flange mounting, can handle up to 100,000 operations for Normally Closed (NC) circuits, and is rated for 10,000,000 operations overall. The contact material is AgCdO (Silver Cadmium Oxide), indicating its suitability for various applications requiring this type of contact.

8 in stock

Manufacturer warranty

40.52.9.024.0001 Finder

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Finder

Powermatic Associates is an authorized Finder distributor, proudly bringing you a diverse range of innovative products from this leading manufacturer renowned for its excellence in industrial automation and control solutions. With over 65 years of experience, Finder specializes in the design and production of high-quality electromechanical and electronic components tailored to meet diverse industr...

Recently viewed products

EX-11B on Powermatic Associates

EX-11B

Panasonic

Panasonic EX-11B is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It features a current consumption of 10mA / 0.01 A for both the emitter and receiver, and offers a degree of protection rated at IP67. The sensor emits red light and is capable of detecting opaque objects as small as 1mm / 0.039". It includes an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. With a response time of 0.5ms / 0.0005 s and a single digital output (NPN open-collector / 24Vdc / 50mA), this sensor operates in a Dark-ON mode. It has a sensing distance of 0.15m / 150mm / 5.906" and includes protection functions such as outputs short-circuit protection. This ultra-slim photo-electric sensor emitter+receiver pair features front sensing and built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads. The sensor operates at a wavelength of 680 nm.

0 in stock

Relevant products

40.52.7.024.0000 on Powermatic Associates

40.52.7.024.0000

Verified stock: 7

Finder 40.52.7.024.0000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +85 degrees Celsius for both operation and storage. This relay has a rated voltage of 250Vac, a control voltage of 6 kV, and is designed for PCB or plug-in mounting. It features a net width of 29 mm, a net depth of 25 mm, and a power consumption of 0.5 W. The visual position indicator has a 5.3mm pins pitch, and the relay is capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The relay's poles are rated for 24Vdc, with a protection function of 250Vac, and it has a response time of 0.5 W.

Finder

FAQ

Out if stock but available for backorder.

Finder 40.52.9.024.0001 is a relay with solder pin connections, designed for a variety of applications with a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1). It also operates at 0.6A at 110Vdc and 0.3A at 220Vdc for Normally Open (NO) auxiliary contacts. The supply voltage is specified as 2C/O / DPDT (Double Pole Double Throw), with an ambient air temperature for operation at 750VA (230Vac) and for storage at 2000VA (250Vac). The rated voltage for AC operation is not specified, but the ambient air temperature range is -40 to +85 degrees Celsius. It uses a communication protocol C, with a net width of 24Vdc and a protection function of 250Vac. The net depth is 25 mm, and the control voltage for AC is rated at 6 kV. It is designed for PCB or plug-in mounting with a 29 mm mounting mode, 2 poles, and a power consumption of 0.65 W. The visual position indicator has a 5.3mm pins pitch, and it is capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The length is specified for the material AgNi (Silver Nickel), with a diameter indicating high durability in its operational life cycle.

Similar products from: Industrial Automation Components

This item can ship within 24h!

BDL36070 on Powermatic Associates

BDL36070

Verified stock: 0

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDL sub-range, featuring a PowerPact B-Frame 100 TMD 3P 70A design for 600Y/347Vac with a 14kA breaking capacity and 80% rated Everlink (Creep compensating) lugs on both line and load sides. It has a rated impulse voltage (Uimp) of 8 kV and offers a degree of protection of IP40. The rated current is 70A, with a rated voltage (AC) of 600Vac 600Y/347Vac. It boasts a mechanical durability of 20,000 operations at no load and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) circuit breaker has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It falls under utilisation category A and features over-current protection fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 70 AT and an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mechanism. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

Schneider Electric

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock