Powermatic Associates Logo

E12SD3UA Panasonic Industrial Automation Components

E12SD3UA on Powermatic Associates
Panasonic

Part#:E12SD3UA

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

E12SD3UA Panasonic - E12SD3UA Slim Duct Low-Profile Cool & Heat

Product Details

  • Heating Capacity
    13,800 btus per hour
  • BTU/Hour
    11,500 btus per hour
  • Net Weight
    42 pounds, 82 pounds

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

About the product

Panasonic Slim-Duct heating and cooling single-zone mini-split air conditioners operate down to -5F and are often selected for rebate programs and cold climate applications. Hidden installation in ceiling, attic, floor or closet. These low-profile indoor units connect to single or multi-zone outdoor units.

Similar products from: Panasonic Industrial Automation Components

AIG02GQ02D on Powermatic Associates

AIG02GQ02D

Panasonic

Panasonic AIG02GQ02D is a Programmable Terminal (PT) / Touchscreen HMI within the GT02G sub-range, featuring a black frame. This part operates with a supply voltage of 5Vdc and connects via an 8 pin terminal connector USB. It is designed with an IP67 degree of protection, ensuring its resistance to dust and water ingress. Communication is facilitated through the RS-232C protocol. The AIG02GQ02D comes with a memory capacity of 2MB (RAM) and a display resolution of 240x96 pixels. Its LCD screen measures 3.8 inches, utilizing an STN monochrome display with a green/orange/red backlight for clear visibility.

20 in stock
EX-L291-P-J on Powermatic Associates

EX-L291-P-J

Panasonic

Panasonic EX-L291-P-J is a photo-electric sensor made from PBT for the case and glass for the lens, designed to operate within an ambient air temperature range of -10 to +55 °C. It has a current consumption of 15mA (0.015 A) and offers a degree of protection rated at IP67. The sensor features a detection spot size of 6mm x 4mm, with a red light color and can detect objects as small as 25mm. It includes an orange LED for operation indication and a green LED for stability, with a response time of 500µs (0.0005 s). This model provides 1 x digital output (PNP open-collector / 24Vdc / 50mA), supports both Light-ON and Dark-ON operating modes, and has a sensing distance of up to 4m. It is equipped with protection functions against outputs short-circuit and inverse polarity. The sensor is characterized by its long sensing range, ultra-compact laser (Class 1) with a built-in amplifier and reflector, and continuously variable sensitivity adjustment. It comes pre-wired with an M8 connector pigtail, featuring 4 cores for the cable and 2 cores for the emitter in terms of circuits, and operates at a wavelength of 655 nm.

4 in stock
AFP7CPS21 on Powermatic Associates

AFP7CPS21

Panasonic

Panasonic AFP7CPS21 is a Programmable Logic Controller (PLC) CPU unit designed for DIN rail mounting. It features a main function as a CPU unit with additional capabilities including a real-time clock, password protection, and PLC link. This model offers a memory capacity of 64K steps for programs and 131072 words / 131Kwords for data, alongside support for 32768 x I/O points. It supports multiple programming languages, including Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). With a processing time of 14ns/step or 0.000014 ms, it operates under a constant scan execution mode.

10 in stock
FD-L12W on Powermatic Associates

FD-L12W

Panasonic

Panasonic FD-L12W is a fiber sensor designed for detecting and measuring with a beam axis diameter of 3.7mm and a length of 1m. It operates within an ambient air temperature range of -40 to +60°C and offers a degree of protection rated at IP40. This sensor is characterized by its minimum bending radius of R1, ensuring flexibility in installation and application.

10 in stock
FC40FF/1-I on Powermatic Associates

FC40FF/1-I

Panasonic

Flat Cable with connectors, MF40MD

3 in stock
AIG12GQ13D on Powermatic Associates

AIG12GQ13D

Panasonic

Panasonic AIG12GQ13D is a Programmable Terminal (PT) / Touchscreen HMI within the GT12G sub-range, featuring a silver frame. This unit operates on a 24Vdc supply voltage and offers connectivity through an 8 pin terminal connector, USB, and SD card. It is designed with an IP67 degree of protection, ensuring its suitability for various industrial environments. Communication is facilitated via the RS-232C protocol. The AIG12GQ13D boasts a memory capacity of 12MB (RAM) and a display resolution of 320x120 pixels. Its LCD display measures 4.6 inches, is STN monochrome, and comes with a green/orange/red backlight for clear visibility under different conditions.

16 in stock

Manufacturer warranty

E12SD3UA Panasonic

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare E12SD3UA with other Industrial Automation Components products

Heating Capacity

BTU/Hour

Net Weight

Selected product

E12SD3UA
Backordered
E12SD3UA
Panasonic

E12SD3UA Panasonic - E12SD3UA Slim Duct Low-Profile Cool & Heat

Heating Capacity13,800 btus per hour

BTU/Hour11,500 btus per hour

Net Weight42 pounds, 82 pounds

BDL36070
Backordered
BDL36070
Schneider Electric

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Heating Capacity-

BTU/Hour-

Net Weight2.37 lb(US) (1.074 kg)

NSYTBP16128T
25 in stock
NSYTBP16128T
Schneider Electric

Schneider Electric - NSYTBP16128T

Heating Capacity-

BTU/Hour-

Net Weight0.75 lb(US) (0.34 kg)

About the manufacturer

Panasonic

Powermatic Associates is an authorized Panasonic distributor, proudly offering a diverse range of innovative industrial products tailored to meet your evolving needs. Panasonic, renowned for its engineering excellence and cutting-edge technology, delivers a comprehensive portfolio encompassing automation, energy solutions, and electronic components designed to enhance operational efficiency, relia...

Recently viewed products

PILZ-570011 on Powermatic Associates

PILZ-570011

Pilz

Pilz PILZ-570011 is a tongue-operated door lock designed for safety door switch applications, capable of 5 actuation directions including from the top. It operates within an ambient air temperature range of -25 to +70°C and features a guard locking radius actuator with auxiliary release and spring-force interlocking type. This part has a rated current of 2.5A for both 240Vac (AC-1) and 230Vac (AC-15), and it connects via an 8-pin M12 connector. The supply voltage ranges from 110Vac to 230Vac, with nominal values at 120Vac and 220Vac, classified under the PSEN me1 sub-range. Dimensions are W42.5mm x H184mm x L51mm, and it boasts an IP67 degree of protection. Power consumption is rated at 8 VA, with an operating mode of power-to-unlock. It includes 2 Normally Open (NO) auxiliary contacts, a latching force of 27N, and contact configuration of 2NO + 2NC, alongside 2 Normally Closed (NC) auxiliary contacts.

0 in stock
MDI1FRD34C7-EQ on Powermatic Associates

MDI1FRD34C7-EQ

Novanta IMS

Novanta IMS MDI1FRD34C7-EQ is a stepper motor that features an integrated driver and operates as a 2-phase DC stepper motor. It is designed with an external single-end 512-line optical encoder and includes a triple (3) motor stack in its Plus version, which encompasses standard features. This part offers a connection through 30cm / 12" bare end flying leads with a 10-pin IDC non-locking connector. It supports RS-422 and RS-485 communication protocols. The supply voltage required for operation ranges from 12Vdc to 75Vdc, with optimal performance at 24Vdc, 48Vdc, and 72Vdc. It is mounted via an 85x85mm flange. The ambient air temperature suitable for its operation spans from 0 to +85°C. With a degree of protection rated at IP20, it has a moment of inertia of 3.4kg.cm^2 and a stall torque of 529N.cm. The resolution is defined by a 1.8° step angle.

0 in stock

Relevant products

PM-K45-C3 on Powermatic Associates

PM-K45-C3

Verified stock: 4

Panasonic PM-K45-C3 is a compact U-shaped (fork type) photoelectric sensor designed for precise object detection with a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable that terminates with bare flying leads. The sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared light with a wavelength of 855 nm for detection. This model includes two digital outputs (PNP open-collector / 24Vdc / 50mA), supporting both Light-ON and Dark-ON operations, with a rapid response time of 80µs. An orange LED serves as a visual position indicator, and the sensor has a current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm.

Panasonic

EX-L291-P-J on Powermatic Associates

EX-L291-P-J

Verified stock: 4

Panasonic EX-L291-P-J is a photo-electric sensor made from PBT for the case and glass for the lens, designed to operate within an ambient air temperature range of -10 to +55 °C. It has a current consumption of 15mA (0.015 A) and offers a degree of protection rated at IP67. The sensor features a detection spot size of 6mm x 4mm, with a red light color and can detect objects as small as 25mm. It includes an orange LED for operation indication and a green LED for stability, with a response time of 500µs (0.0005 s). This model provides 1 x digital output (PNP open-collector / 24Vdc / 50mA), supports both Light-ON and Dark-ON operating modes, and has a sensing distance of up to 4m. It is equipped with protection functions against outputs short-circuit and inverse polarity. The sensor is characterized by its long sensing range, ultra-compact laser (Class 1) with a built-in amplifier and reflector, and continuously variable sensitivity adjustment. It comes pre-wired with an M8 connector pigtail, featuring 4 cores for the cable and 2 cores for the emitter in terms of circuits, and operates at a wavelength of 655 nm.

Panasonic

FAQ

Out if stock but available for backorder.

E12SD3UA Panasonic - E12SD3UA Slim Duct Low-Profile Cool & Heat

Similar products from: Industrial Automation Components

This item can ship within 24h!

BDL36070 on Powermatic Associates

BDL36070

Verified stock: 0

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDL sub-range, featuring a PowerPact B-Frame 100 TMD 3P 70A design for 600Y/347Vac with a 14kA breaking capacity and 80% rated Everlink (Creep compensating) lugs on both line and load sides. It has a rated impulse voltage (Uimp) of 8 kV and offers a degree of protection of IP40. The rated current is 70A, with a rated voltage (AC) of 600Vac 600Y/347Vac. It boasts a mechanical durability of 20,000 operations at no load and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) circuit breaker has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It falls under utilisation category A and features over-current protection fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 70 AT and an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mechanism. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

Schneider Electric

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock