Powermatic Associates Logo

GJ-N1-VD0 Panasonic Industrial Automation Components

GJ-N1-VD0 on Powermatic Associates
Panasonic

Part#:GJ-N1-VD0

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

GJ-N1-VD0 Panasonic - GJ-N1-VD0 | Gamber-Johnson Vehicle Cradle (no pass)

Product Details

  • Weight
    0.7 pounds
  • Warranty Length
    3 years

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

About the product

Compatible with TOUGHBOOK N1, F1

Similar products from: Panasonic Industrial Automation Components

EX-13EB-C5 on Powermatic Associates

EX-13EB-C5

Panasonic

Panasonic EX-13EB-C5 is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The visual position indicator features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. With a response time of 0.5ms / 0.0005 s and a single digital output (NPN open-collector / 24Vdc / 50mA), it operates in Dark-ON mode. The sensing distance is set at 0.5m / 50cm / 500mm / 19.685in. It includes protection functions such as outputs short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with side sensing and built-in amplification. The connection is facilitated by a pre-wired 5m 3-core (2-core on emitter side) 0.1mm2 cabtyre cable terminated with bare end flying leads.

10 in stock
AFPX-EFP0 on Powermatic Associates

AFPX-EFP0

Panasonic

Panasonic AFPX-EFP0 is a connector specifically designed for expansion FP0 adapter applications within the expansion units sub-range. It facilitates the connection of up to 3 slave devices. This part is engineered for DIN rail mounting, offering a streamlined installation process for various automation environments.

2 in stock
MS-EQ5-01 on Powermatic Associates

MS-EQ5-01

Panasonic

Panasonic MS-EQ5-01 is a mounting accessory designed as a foot / back angled mounting bracket.

26 in stock
AFPX-BATT on Powermatic Associates

AFPX-BATT

Panasonic

Panasonic AFPX-BATT is a battery designed for use as a backup or spare battery, specifically intended to maintain the real-time clock in automation systems.

1 in stock
AFPG804 on Powermatic Associates

AFPG804

Panasonic

Panasonic AFPG804 is a battery designed for backup or use as a spare battery.

13 in stock
AIGT8142 on Powermatic Associates

AIGT8142

Panasonic

Panasonic AIGT8142 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 4 single wires plus a shielding wire. It operates on a supply voltage of 5Vdc and uses the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

40 in stock

Manufacturer warranty

GJ-N1-VD0 Panasonic

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare GJ-N1-VD0 with other Industrial Automation Components products

Weight

Warranty Length

Selected product

GJ-N1-VD0
Backordered
GJ-N1-VD0
Panasonic

GJ-N1-VD0 Panasonic - GJ-N1-VD0 | Gamber-Johnson Vehicle Cradle (no pass)

Weight0.7 pounds

Warranty Length3 years

VB2-FSM/FKM/FKM 57
19 in stock
VB2-FSM/FKM/FKM 57
Turck

VB2-FSM/FKM/FKM 57 Turck - VB2-FSM/FKM/FKM 57 DeviceNet™ Splitter, 2 Branch

Weight54.431 grams

Warranty Length-

2204-1407
114 in stock
2204-1407
WAGO

2204-1407 WAGO - TOPJOB®S ground terminal block with Push-buttons; rail mount; 4-conductor; 6.2 mm w...

Weight16.072 grams

Warranty Length-

About the manufacturer

Panasonic

Powermatic Associates is an authorized Panasonic distributor, proudly offering a diverse range of innovative industrial products tailored to meet your evolving needs. Panasonic, renowned for its engineering excellence and cutting-edge technology, delivers a comprehensive portfolio encompassing automation, energy solutions, and electronic components designed to enhance operational efficiency, relia...

Recently viewed products

MFI1FRL17N4 on Powermatic Associates

MFI1FRL17N4

Novanta IMS

Novanta IMS MFI1FRL17N4 is a stepper motor controller within the Stepper motor controllers sub-range, designed under the MicroDrive series. It operates with a supply voltage range of 12Vdc to 48Vdc, nominally at 24Vdc, and supports a rated current of 3A. This controller is equipped for DC stepper motor drive functions and features an ambient air temperature for operation between 0 and +65 °C. For connectivity, it includes 30cm / 12" bare end flying leads, a 10-pin wire crimp connector, and a 4-pin wire crimp connector. Communication with the controller is facilitated through RS-422 and RS-485 protocols. It also offers 4 x digital outputs (sinking; NPN) and 4 x digital inputs (sourcing; NPN). The device is designed to be stored in conditions ranging from -25 to +70 °C ambient air temperature.

0 in stock
MDI4MRQ34C1-EQ on Powermatic Associates

MDI4MRQ34C1-EQ

Novanta IMS

Novanta IMS MDI4MRQ34C1-EQ is a stepper motor designed with an integrated driver and a 2-phase AC stepper motor configuration. It features an external single-end 512-line optical encoder and is built with a triple (3) motor stack, Plus 2 version for expanded features. This motor offers connectivity through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. It operates on a supply voltage of 120Vac and is mounted via an 85x85mm flange. The MDI4MRQ34C1-EQ is designed to function within an ambient air temperature range of 0 to +85°C and is protected to a degree of IP65. It has a moment of inertia of 3.4kg.cm^2 and provides a stall torque of 529N.cm, with a resolution characterized by a 1.8° step angle.

0 in stock
LMHCA571C on Powermatic Associates

LMHCA571C

Novanta IMS

Novanta IMS LMHCA571C is a stepper motor that falls under the high-torque stepper motors sub-range. It features an integrated driver and a high-torque DC stepper motor with an incremental magnetic encoder, utilizing a single motor stack and closed-loop hMTechnology for precise control. This motor offers a variety of connection types, including a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting CANopen communication protocol. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The LMHCA571C is designed for mounting with a 57x57mm flange and is rated with a degree of protection of IP65, making it suitable for environments where dust and water resistance is necessary. It has a moment of inertia of 0.14kg.cm^2 and can deliver a stall torque of 107N.cm. The resolution of this stepper motor is defined by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

GJ-N1-VD0 Panasonic - GJ-N1-VD0 | Gamber-Johnson Vehicle Cradle (no pass)

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock