ATV212HD22N4 Schneider Electric Industrial Automation Components

Product Details

• Maximum Horse Power Rating
  30 hp
• Nominal Switching Frequency
  8 kHz
• Output Voltage
  <= power supply voltage
• Type Of Polarization
  No impedance
• Air Flow
  56533.83 Gal/hr(US) (214 m3/h)
• Data Format
  8 bits, 1 stop, odd even or no configurable parity
• Functionality
  Mid
• Product Destination
  Asynchronous motors
• Supply Frequency
  50...60 Hz - 5...5 %
• Speed Range
  1…10
• Range Of Product
  Altivar 212
• Prospective Line Isc
  22 kA
• Torque Accuracy
  +/- 15 %
• Minimum Switching Current
  3 mA 24 V DC configurable relay logic
• Braking To Standstill
  By DC injection
• Power Dissipation In W
  626 W
• Motor Power Kw
  22 kW
• Local Signalling
  for DC bus energized 1 LED (red)
• Number Of Addresses
  1…247
• Height
  16.54 in (420 mm)
Depth
8.43 in (214 mm)
Product Specific Application
Pumps and fans in HVAC
Apparent Power
33.2 kVA 380 V
Transient Overtorque
120 % of nominal motor torque +/- 10 % 60 s
Isolation
Electrical between power and control
Analogue Output Number
1
Transmission Frame
RTU
Physical Interface
2-wire RS 485
IP Degree Of Protection
IP21
Product Or Component Type
Variable speed drive
[Us] Rated Supply Voltage
380...480 V - 15...10 %
Speed Drive Output Frequency
0.5…200 Hz
Analogue Input Number
2
Insulation Resistance
>= 1 mOhm 500 V DC for 1 minute
Device Short Name
ATV212
Supply Voltage Limits
323…528 V
EMC Filter
Class C2 EMC filter integrated
Regulation Loop
Adjustable PI regulator
Discrete Output Number
2
Operating Position
Vertical +/- 10 degree
Transmission Rate
9600 bps or 19200 bps
Assembly Style
With heat sink
Phase
3 phase
Maximum Transient Current
47.9 A 60 s
Speed Accuracy
+/- 10 % of nominal slip 0.2 Tn to Tn
Net Weight
58.20 lb(US) (26.4 kg)
Specific Application
HVAC
Option Card
Communication card LonWorks
Width
9.45 in (240 mm)
Motor Starter Type
Variable speed drive
Dielectric Strength
3535 V DC between earth and power terminals 5092 V DC between control and power terminals
Continuous Output Current
43.5 A 380 V 43.5 A 460 V
Electrical Connection
VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00 in² (2.5 mm²) / AWG 14 L1/R, L2/S, L3/T terminal 0.08 in² (50 mm²) / AWG 1/0
Supply
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection Internal supply 24 V DC 21…27 V), <200 A overload and short-circuit protection
Tightening Torque
5.31 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) 212.42 lbf.in (24 N.m), 212 lb.in L1/R, L2/S, L3/T)
Acceleration And Deceleration Ramps
Automatic based on the load Linear adjustable separately from 0.01 to 3200 s
Analogue Output Type
FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits FM switch-configurable current 0...20 mA 970 Ohm 10 bits
Frequency Resolution
Display unit 0.1 Hz Analog input: 0.024/50 Hz
Motor Power Range AC-3
15…25 kW 380…440 V 3 phase 15…25 kW 480…500 V 3 phase
Connector Type
1 RJ45 1 open style
Line Current
33.1 A 480 V 41.6 A 380 V
Switching Frequency
6...16 kHz adjustable 8...16 kHz with derating factor
Discrete Input Logic
Positive logic (source) F, R, RES), <= 5 V, >= 11 V Negative logic (sink) F, R, RES), >= 16 V, <= 10 V
Type Of Cable
Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC
Discrete Output Type
Configurable relay logic FLA, FLC) NO - 100000 cycles Configurable relay logic FLB, FLC) NC - 100000 cycles Configurable relay logic RY, RC) NO - 100000 cycles
Motor Slip Compensation
Adjustable Not available in voltage/frequency ratio motor control Automatic whatever the load
Linearity Error
VIA +/- 0.15 % of maximum value input VIB +/- 0.15 % of maximum value input FM +/- 0.2 % output
Discrete Input Type
F programmable 24 V DC level 1 PLC 4700 Ohm R programmable 24 V DC level 1 PLC 4700 Ohm RES programmable 24 V DC level 1 PLC 4700 Ohm
Accuracy
+/- 0.6 % VIA) for a temperature variation 60 °C +/- 0.6 % VIB) for a temperature variation 60 °C +/- 1 % FM) for a temperature variation 60 °C
Variable Speed Drive Application Selection
Compressor for scroll Building - HVAC Fan Building - HVAC Pump Building - HVAC
Analogue Input Type
VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits VIB configurable PTC probe 0...6 probes 1500 Ohm VIA switch-configurable current 0...20 mA 250 Ohm 10 bit
Response Time
FM 2 ms +/- 0.5 ms analog FLA, FLC 7 ms +/- 0.5 ms discrete FLB, FLC 7 ms +/- 0.5 ms discrete RY, RC 7 ms +/- 0.5 ms discrete
Maximum Switching Current
5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
Asynchronous Motor Control Profile
Voltage/frequency ratio, 2 points Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Flux vector control without sensor, standard Voltage/frequency ratio, 5 po
Sampling Duration
2 ms +/- 0.5 ms F discrete 2 ms +/- 0.5 ms R discrete 2 ms +/- 0.5 ms RES discrete 3.5 ms +/- 0.5 ms VIA analog 22 ms +/- 0.5 ms VIB analog
Communication Port Protocol
Modbus LonWorks APOGEE FLN BACnet METASYS N2
Communication Service
Write single register (06) Read device identification (43) Read holding registers (03) 2 words maximum Write multiple registers (16) 2 words maximum Time out setting from 0.1 to 100 s Monitoring inhibitable
Protection Type
Overheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control

ATV212HD22N4 Related Documents