Powermatic Associates Logo

BMI0703P22F Schneider Electric Industrial Automation Components

BMI0703P22F on Powermatic Associates
Schneider Electric

Part#:BMI0703P22F

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric BMI0703P22F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and triple (3) motor stacks. The motor operates on a supply voltage of 208Vac-480Vac, including specific ratings of 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and supports a rated current of 2.1A at 1600rpm with 208Vac, 1.87A at 3300rpm with 400Vac, and 1.71A at 3800rpm with 480Vac. The mounting mode is facilitated by a 70x70mm flange. Communication is enabled through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac, with rated active power of 0.49kW/490W, 0.89kW/890W, and 0.94kW/940W respectively. The motor delivers a maximum torque of 8.06Nm, a stall torque of 2.96Nm, and operational torques of 2.93Nm at 1600rpm with 208Vac, 2.58Nm at 3300rpm with 400Vac, and 2.35Nm at 3800rpm with 480Vac. Its moment of inertia is rated at 1.78kg.cm.

Product Details

  • Range Compatibility
    Lexium 32i
  • Output Current 3S Peak
    6 A 400 V 3 s
  • Product Or Component Type
    Servo motor with power stage
  • Speed Feedback Resolution
    131072 points/turn x 4096 turns
  • Continuous Output Current
    2 A 8 kHz
  • Holding Torque
    26.55 lbf.in (3 N.m) holding brake
  • [Us] Rated Supply Voltage
    208...480 V - 15...10 %
  • Holding Brake
    With
  • Supply Voltage Limits
    208…480 V
  • Supply Frequency
    50/60 Hz - 5...5 %
  • EMC Filter
    Integrated
  • Second Shaft
    Without second shaft end
  • Motor Flange Size
    2.76 in (70 mm)
  • Device Short Name
    BMI
  • Continuous Stall Current
    2 A
  • Shaft End
    Untapped
  • Phase
    Three phase
  • Shaft Length
    1.18 in (30 mm)
  • Network Frequency Limits
    47.5…63 Hz
  • Continuous Stall Torque
    30.09 lbf.in (3.4 N.m) 208...480 V three phase
  • Maximum Mechanical Speed
    8000 rpm
  • Length
    13.35 in (339 mm)
  • Electrical Connection
    Printed circuit board connector
  • Brake Pull-In Power
    5 W
  • Mounting Support
    International standard flange
  • Type Of Cooling
    Natural convection
  • Torque Constant
    1.41 N.m/A 68 °F (20 °C)
  • Maximum Axial Force Fa
    0.2 x Fr
  • Feedback Type
    Absolute multiturn SinCos Hiperface
  • Number Of Motor Poles
    10
  • Back Emf Constant
    95.39 V/krpm 68 °F (20 °C)
  • Mounting Holes Diameter
    0.22 in (5.5 mm)
  • Stator Resistance
    7.99 Ohm 68 °F (20 °C)
  • Centring Collar Depth
    0.10 in (2.5 mm)
  • Distance Shaft Shoulder-Flange
    0.10 in (2.5 mm)
  • Number Of Motor Stacks
    3
  • Number Of Mounting Holes
    4
  • Stator Inductance
    25.6 mH 68 °F (20 °C)
  • Circle Diameter Of The Mounting Holes
    2.95…3.23 in (75…82 mm)
  • Rotor Inertia
    1.78 kg.cm²
  • Shaft Diameter
    0.55 in (14 mm)
  • Stator Electrical Time Constant
    3.2 ms 68 °F (20 °C)
  • Centring Collar Diameter
    2.36 in (60 mm)
  • Product Compatibility
    Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
  • Nominal Output Power
    900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase
  • Peak Stall Torque
    76.12 lbf.in (8.6 N.m) 208 V three phase 76.12 lbf.in (8.6 N.m) 400 V three phase 76.12 lbf.in (8.6 N.m) 480 V three phase
  • Nominal Speed
    3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase
  • Maximum Current Irms
    12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase
  • Nominal Torque
    25.67 lbf.in (2.9 N.m) 208 V three phase 23.90 lbf.in (2.7 N.m) 400 V three phase 20.36 lbf.in (2.3 N.m) 480 V three phase
  • Maximum Radial Force Fr
    730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of BMI0703P22F on Powermatic Associates is $3,061.14. Order now.

BMI0703P22F Related Documents

Product Datasheet-1631036557923.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43306 on Powermatic Associates

M9F43306

Schneider Electric

Schneider Electric M9F43306 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed for three-phase applications with a 3 Pole configuration. It has a rated current of 6A and offers a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It features a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it utilizes a D tripping curve.

2 in stock

Manufacturer warranty

BMI0703P22F Schneider Electric

$3,061.14

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$3,061.14

$3,061.14 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare BMI0703P22F with other Industrial Automation Components products

Range Compatibility

Output Current 3S Peak

Product Or Component Type

Speed Feedback Resolution

Continuous Output Current

Holding Torque

[Us] Rated Supply Voltage

Holding Brake

Supply Voltage Limits

Supply Frequency

Selected product

BMI0703P22F
Backordered
BMI0703P22F
Schneider Electric

Schneider Electric BMI0703P22F is an AC servo motor within the Servo motors sub-range, featuring an ...

Range CompatibilityLexium 32i

Output Current 3S Peak6 A 400 V 3 s

Product Or Component TypeServo motor with power stage

Speed Feedback Resolution131072 points/turn x 4096 tu...

Continuous Output Current2 A 8 kHz

Holding Torque26.55 lbf.in (3 N.m) holding...

[Us] Rated Supply Voltage208...480 V - 15...10 %

Holding BrakeWith

Supply Voltage Limits208…480 V

Supply Frequency50/60 Hz - 5...5 %

BMI0703P02F
4 in stock
BMI0703P02F
Schneider Electric

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an ...

Range CompatibilityLexium 32i

Output Current 3S Peak6 A 400 V 3 s

Product Or Component TypeServo motor with power stage

Speed Feedback Resolution-

Continuous Output Current-

Holding Torque-

[Us] Rated Supply Voltage208...480 V - 15...10 %

Holding Brake-

Supply Voltage Limits208…480 V

Supply Frequency50/60 Hz - 5...5 %

TRV00880
183 in stock
TRV00880
Schneider Electric

Schneider Electric TRV00880 is a mounting accessory designed for use within the communication access...

Range CompatibilityComPact NSX ComPact NSX DC P...

Output Current 3S Peak-

Product Or Component TypeLine terminator

Speed Feedback Resolution-

Continuous Output Current-

Holding Torque-

[Us] Rated Supply Voltage-

Holding Brake-

Supply Voltage Limits-

Supply Frequency-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

BMI0703P02F on Powermatic Associates

BMI0703P02F

Verified stock: 4

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 2.1A at 1600rpm and 208Vac, 1.87A at 3300rpm and 400Vac, and 1.71A at 3800rpm and 480Vac. The mounting mode is a 70x70mm flange, and it uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speed varies with supply voltage, achieving 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac. The rated active power is 0.49kW / 490W at 1600rpm and 208Vac, 0.89kW / 890W at 3300rpm and 400Vac, and 0.94kW / 940W at 3800rpm and 480Vac. The maximum torque is 8.06Nm, with a stall torque of 2.96Nm, and operational torques of 2.93Nm at 1600rpm and 208Vac, 2.58Nm at 3300rpm and 400Vac, and 2.35Nm at 3800rpm and 480Vac. The moment of inertia is 1.78kg.cm.

Schneider Electric

BMI0702T36A on Powermatic Associates

BMI0702T36A

Verified stock: 0

Schneider Electric BMI0702T36A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 16ppr SinCos encoder and a keyed shaft with double (2) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac, including specific ratings of 120Vac, 200Vac, and 220Vac, and offers a degree of protection rated at IP65. The rated current is 3.55A at 1700rpm with 115Vac and 2.83A at 4000rpm with 230Vac. It is designed for mounting with a 70x70mm flange and utilizes the HIPERFACE communication protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1700rpm at 115Vac and 4000rpm at 230Vac, with rated active power of 0.4kW / 400W at 1700rpm with 115Vac and 0.7kW / 700W at 4000rpm with 230Vac. The maximum torque is 4.84Nm, with a stall torque of 2.24Nm, and operational torques of 2.2Nm at 1700rpm with 115Vac and 1.7Nm at 4000rpm with 230Vac.

Schneider Electric

BMI0702P01A on Powermatic Associates

BMI0702P01A

Verified stock: 0

Schneider Electric BMI0702P01A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, and double (2) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including 220Vac, 240Vac, and 400Vac options. It offers a degree of protection rated at IP54 and IP65. The rated current varies with speed and voltage: 1.95A at 1800rpm with 208Vac, 1.8A at 3600rpm with 400Vac, and 1.80A at 4400rpm with 480Vac. It is mounted via a 70x70mm flange and uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speeds are 1800rpm at 208Vac, 3600rpm at 400Vac, and 4400rpm at 480Vac, with rated active powers of 0.42kW/420W, 0.76kW/760W, and 0.93kW/930W, respectively. The maximum torque is 6.42Nm, with a stall torque of 2.24Nm. The torque output is 2.21Nm at 1800rpm with 208Vac, 2.02Nm at 3600rpm with 400Vac, and 2.01Nm at 4400rpm with 480Vac. The moment of inertia is 1.13kg.cm2.

Schneider Electric

BMI0702P37F on Powermatic Associates

BMI0702P37F

Verified stock: 0

Schneider Electric BMI0702P37F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 16ppr SinCos encoder, a keyed shaft, a holding brake, and double motor stacks. The servo motor operates on a supply voltage ranging from 208Vac to 480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and supports a mounting mode with a 70x70mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1800rpm at 208Vac, 3600rpm at 400Vac, and 4400rpm at 480Vac, with rated currents of 1.95A, 1.8A, and 1.80A respectively. The rated active power varies from 0.42kW at 1800rpm and 208Vac to 0.93kW at 4400rpm and 480Vac. This motor delivers a maximum torque of 6.42Nm, a stall torque of 2.24Nm, and operational torques of 2.21Nm, 2.02Nm, and 2.01Nm at its respective operational speeds and voltages. The moment of inertia is noted as 1.24kg.cm.

Schneider Electric

BMI0702P02A on Powermatic Associates

BMI0702P02A

Verified stock: 0

Schneider Electric BMI0702P02A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, and double (2) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including 220Vac, 240Vac, and 400Vac options. It offers a degree of protection rated at IP54 and IP65, with a rated current of 1.95A at 1800rpm and 208Vac, 1.8A at 3600rpm and 400Vac, and 1.80A at 4400rpm and 480Vac. The mounting mode is a 70x70mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1800rpm at 208Vac, 3600rpm at 400Vac, and 4400rpm at 480Vac, with rated active power of 0.42kW at 1800rpm and 208Vac, 0.76kW at 3600rpm and 400Vac, and 0.93kW at 4400rpm and 480Vac. The maximum torque is 6.42Nm, with a stall torque of 2.24Nm, and operating torques of 2.21Nm at 1800rpm and 208Vac, 2.02Nm at 3600rpm and 400Vac, and 2.01Nm at 4400rpm and 480Vac. The moment of inertia is 1.13kg.cm2.

Schneider Electric

FAQ

What is the price of BMI0703P22F?
Purchase the BMI0703P22F from Powermatic Associates at the price of $3,061.14. Order today.

Out if stock but available for backorder.

Schneider Electric BMI0703P22F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and triple (3) motor stacks. The motor operates on a supply voltage of 208Vac-480Vac, including specific ratings of 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and supports a rated current of 2.1A at 1600rpm with 208Vac, 1.87A at 3300rpm with 400Vac, and 1.71A at 3800rpm with 480Vac. The mounting mode is facilitated by a 70x70mm flange. Communication is enabled through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac, with rated active power of 0.49kW/490W, 0.89kW/890W, and 0.94kW/940W respectively. The motor delivers a maximum torque of 8.06Nm, a stall torque of 2.96Nm, and operational torques of 2.93Nm at 1600rpm with 208Vac, 2.58Nm at 3300rpm with 400Vac, and 2.35Nm at 3800rpm with 480Vac. Its moment of inertia is rated at 1.78kg.cm.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

C48CS003 on Powermatic Associates

C48CS003

Red Lion

Red Lion C48CS003 is a single preset digital counter within the C48 series, designed to fit a 1/16 DIN (48x48mm) enclosure. It operates on a supply voltage range of 85-250Vac, including specific values such as 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac, and also supports a DC supply voltage of 11-14Vdc, specifically 12Vdc. The dimensions of this counter are standardized to 1/16 DIN, measuring W48mm x H48mm (1.89" x 1.89"). It offers a degree of protection rated at IP65 NEMA 4X, suitable for flush or door mounting. The C48CS003 features 1 high-speed digital input (12kHz; Sink/Source) labeled INPUT A, an additional digital input (Sink/Source) designated as USER INPUT 1, and a third digital input (Sink/Source) that can function as input B or USER INPUT 1. For output, it provides 1 digital output (NPN) and 1 digital output (contact type NO).

1 in stock