Powermatic Associates Logo

BMI1002T31F Schneider Electric Industrial Automation Components

BMI1002T31F on Powermatic Associates
Schneider Electric

Part#:BMI1002T31F

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric BMI1002T31F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a keyed shaft, a holding brake, and double (2) motor stacks. The motor operates on a supply voltage of 115Vac-230Vac, including specific ratings of 120Vac, 200Vac, and 220Vac. It offers a degree of protection rated at IP65 and supports a rated current of 5.7A at 1400rpm with 115Vac and 4.59A at 3000rpm with 230Vac. The mounting mode is facilitated by a 100x100mm flange. Communication is enabled through the HIPERFACE protocol. The net width of the motor is 100 mm. It achieves rotational speeds of 1400rpm at 115Vac and 3000rpm at 230Vac, with rated active power of 0.75kW / 750W at 1400rpm with 115Vac and 1.3kW / 1300W at 3000rpm with 230Vac. The maximum torque is 12.39Nm, with a stall torque of 5.07Nm, and operational torques of 5.4Nm at 1400rpm with 115Vac and 4.4Nm at 3000rpm with 230Vac.

Product Details

  • Holding Brake
    With
  • Number Of Motor Poles
    10
  • Device Short Name
    BMI
  • Maximum Axial Force Fa
    0.2 x Fr
  • Phase
    Single phase
  • Shaft Diameter
    0.75 in (19 mm)
  • Speed Feedback Resolution
    131072 points/turn
  • Stator Inductance
    4.7 mH 68 °F (20 °C)
  • Network Frequency Limits
    47.5…63 Hz
  • Continuous Stall Current
    6 A
  • Range Compatibility
    Lexium 32i
  • EMC Filter
    Integrated
  • Key Width
    0.24 in (6 mm)
  • Motor Flange Size
    3.94 in (100 mm)
  • Maximum Mechanical Speed
    6000 rpm
  • Shaft Length
    1.57 in (40 mm)
  • Back Emf Constant
    58.5 V/krpm 68 °F (20 °C)
  • Brake Pull-In Power
    8 W
  • Output Current 3S Peak
    18 A 230 V 3 s
  • Torque Constant
    0.89 N.m/A 68 °F (20 °C)
  • Type Of Cooling
    Natural convection
  • Mounting Holes Diameter
    0.35 in (9 mm)
  • [Us] Rated Supply Voltage
    115...230 V - 15...10 %
  • Continuous Output Current
    6 A 8 kHz
  • Product Or Component Type
    Servo motor with power stage
  • Holding Torque
    48.68 lbf.in (5.5 N.m) holding brake
  • Stator Electrical Time Constant
    4.35 ms 68 °F (20 °C)
  • Number Of Mounting Holes
    4
  • Supply Voltage Limits
    100…240 V
  • Continuous Stall Torque
    53.10 lbf.in (6 N.m) 115...230 V single phase
  • Shaft End
    Keyed
  • Electrical Connection
    Printed circuit board connector
  • Length
    11.10 in (282 mm)
  • Number Of Motor Stacks
    2
  • Supply Frequency
    50/60 Hz - 5...5 %
  • Feedback Type
    Absolute single turn SinCos Hiperface
  • Rotor Inertia
    6.77 kg.cm²
  • Second Shaft
    Without second shaft end
  • Mounting Support
    International standard flange
  • Stator Resistance
    1.08 Ohm 68 °F (20 °C)
  • Centring Collar Depth
    0.14 in (3.5 mm)
  • Circle Diameter Of The Mounting Holes
    4.53 in (115 mm)
  • Distance Shaft Shoulder-Flange
    0.14 in (3.5 mm)
  • Centring Collar Diameter
    3.74 in (95 mm)
  • Maximum Current Irms
    30 A 115 V, single phase 30 A 230 V, single phase
  • Nominal Output Power
    750 W 115 V single phase 1300 W 230 V single phase
  • Nominal Torque
    47.79 lbf.in (5.4 N.m) 115 V single phase 38.94 lbf.in (4.4 N.m) 230 V single phase
  • Product Compatibility
    Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
  • Nominal Speed
    1400 rpm 115 V single phase 3000 rpm 230 V single phase
  • Peak Stall Torque
    128.34 lbf.in (14.5 N.m) 115 V single phase 128.34 lbf.in (14.5 N.m) 230 V single phase
  • Maximum Radial Force Fr
    990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of BMI1002T31F on Powermatic Associates is $3,221.16. Order now.

BMI1002T31F Related Documents

Product Datasheet-1631035947210.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
BDL36070 on Powermatic Associates

BDL36070

Schneider Electric

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDL sub-range, featuring a PowerPact B-Frame 100 TMD 3P 70A design for 600Y/347Vac with a 14kA breaking capacity and 80% rated Everlink (Creep compensating) lugs on both line and load sides. It has a rated impulse voltage (Uimp) of 8 kV and offers a degree of protection of IP40. The rated current is 70A, with a rated voltage (AC) of 600Vac 600Y/347Vac. It boasts a mechanical durability of 20,000 operations at no load and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) circuit breaker has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It falls under utilisation category A and features over-current protection fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 70 AT and an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mechanism. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

0 in stock
DFCC2 on Powermatic Associates

DFCC2

Schneider Electric

Schneider Electric - DFCC2

12 in stock
M9F42325 on Powermatic Associates

M9F42325

Schneider Electric

Schneider Electric M9F42325 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3 Pole configuration and a rated current of 25A. It features a rated insulation voltage (Ui) of 500 V, a DC rated voltage of 60Vdc, and an impulse voltage (Uimp) rating of 6 kV. This MCB offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. It supports a rated voltage (AC) of 240 V phase-to-neutral and 415 V phase-to-phase, with all three poles protected. The tripping curve is classified as type C.

1 in stock

Manufacturer warranty

BMI1002T31F Schneider Electric

$3,221.16

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$3,221.16

$3,221.16 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare BMI1002T31F with other Industrial Automation Components products

Holding Brake

Number Of Motor Poles

Device Short Name

Maximum Axial Force Fa

Phase

Shaft Diameter

Speed Feedback Resolution

Stator Inductance

Network Frequency Limits

Continuous Stall Current

Selected product

BMI1002T31F
Backordered
BMI1002T31F
Schneider Electric

Schneider Electric BMI1002T31F is an AC servo motor within the Servo motors sub-range, featuring an ...

Holding BrakeWith

Number Of Motor Poles10

Device Short NameBMI

Maximum Axial Force Fa0.2 x Fr

PhaseSingle phase

Shaft Diameter0.75 in (19 mm)

Speed Feedback Resolution131072 points/turn

Stator Inductance4.7 mH 68 °F (20 °C)

Network Frequency Limits47.5…63 Hz

Continuous Stall Current6 A

BMI0703P02F
4 in stock
BMI0703P02F
Schneider Electric

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an ...

Holding Brake-

Number Of Motor Poles-

Device Short NameBMI

Maximum Axial Force Fa-

PhaseThree phase

Shaft Diameter-

Speed Feedback Resolution-

Stator Inductance-

Network Frequency Limits47.5…63 Hz

Continuous Stall Current-

TRV00810
60 in stock
TRV00810
Schneider Electric

Schneider Electric TRV00810 is a cable designed as part of the communication accessories sub-range, ...

Holding Brake-

Number Of Motor Poles-

Device Short NameRJ45 male cord L = 1 m

Maximum Axial Force Fa-

Phase-

Shaft Diameter-

Speed Feedback Resolution-

Stator Inductance-

Network Frequency Limits-

Continuous Stall Current-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

BMI1002P02A on Powermatic Associates

BMI1002P02A

Verified stock: 0

Schneider Electric BMI1002P02A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, and double (2) motor stacks. The servo motor operates on a supply voltage range of 208Vac to 480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, with rated currents of 3.9A at 1900rpm and 208Vac, 3.5A at 3800rpm and 400Vac, and 3.25A at 4700rpm and 480Vac. The mounting mode is a 100x100mm flange. Communication is facilitated via the HIPERFACE protocol. The net width of the motor is 100 mm. Rotational speeds are 1900rpm at 208Vac, 3800rpm at 400Vac, and 4700rpm at 480Vac, with rated active power of 0.98kW at 1900rpm and 208Vac, 1.73kW at 3800rpm and 400Vac, and 1.69kW at 4700rpm and 480Vac. Maximum torque is 13.92Nm, with stall torque at 4.99Nm, and operational torques of 4.91Nm at 1900rpm and 208Vac, 4.34Nm at 3800rpm and 400Vac, and 4Nm at 4700rpm and 480Vac. The moment of inertia is 6.28kg.cm2.

Schneider Electric

BMI1003P01A on Powermatic Associates

BMI1003P01A

Verified stock: 0

Schneider Electric BMI1003P01A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, ensuring its suitability for various industrial environments. The rated current varies with speed and voltage, being 4.3A at 1500rpm and 208Vac, 3.85A at 3000rpm and 400Vac, and 3.55A at 3600rpm and 480Vac. This motor is designed for mounting with a 100x100mm flange and communicates via the HIPERFACE protocol. Its net width is 100 mm. The rotational speed capabilities are 1500rpm at 208Vac, 3000rpm at 400Vac, and 3600rpm at 480Vac, with corresponding rated active power of 1.13kW / 1130W, 2.01kW / 2010W, and 2.1kW / 2100W. The maximum torque is 18.87Nm, with a stall torque of 7.31Nm, and operational torques of 7.22Nm at 1500rpm and 208Vac, 6.38Nm at 3000rpm and 400Vac, and 5.57Nm at 3600rpm and 480Vac. The moment of inertia is rated at 9.37kg.cm2.

Schneider Electric

BMI1002P22F on Powermatic Associates

BMI1002P22F

Verified stock: 0

Schneider Electric BMI1002P22F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The supply voltage ranges from 208Vac to 480Vac, supporting 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and operates at rated currents of 3.9A at 1900rpm with 208Vac, 3.5A at 3800rpm with 400Vac, and 3.25A at 4700rpm with 480Vac. The motor is mounted via a 100x100mm flange and uses the HIPERFACE communication protocol. Its net width is 100 mm. The rotational speeds are 1900rpm at 208Vac, 3800rpm at 400Vac, and 4700rpm at 480Vac, with rated active powers of 0.98kW at 1900rpm with 208Vac, 1.73kW at 3800rpm with 400Vac, and 1.69kW at 4700rpm with 480Vac. The maximum torque is 13.92Nm, with stall torque at 4.99Nm and operational torques of 4.91Nm at 1900rpm with 208Vac, 4.34Nm at 3800rpm with 400Vac, and 4Nm at 4700rpm with 480Vac. The moment of inertia is 6.77kg.cm.

Schneider Electric

BMI1003P31F on Powermatic Associates

BMI1003P31F

Verified stock: 0

Schneider Electric BMI1003P31F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a keyed shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and supports a rated current of 4.3A at 1500rpm with 208Vac, 3.85A at 3000rpm with 400Vac, and 3.55A at 3600rpm with 480Vac. The mounting mode is a 100x100mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 100 mm. It achieves rotational speeds of 1500rpm at 208Vac, 3000rpm at 400Vac, and 3600rpm at 480Vac, with rated active power of 1.13kW / 1130W at 1500rpm and 208Vac, 2.01kW / 2010W at 3000rpm and 400Vac, and 2.1kW / 2100W at 3600rpm and 480Vac. The maximum torque is 18.87Nm, with a stall torque of 7.31Nm, and operational torques of 7.22Nm at 1500rpm and 208Vac, 6.38Nm at 3000rpm and 400Vac, and 5.57Nm at 3600rpm and 480Vac. The moment of inertia is 10.15kg.cm.

Schneider Electric

BMI1002P02F on Powermatic Associates

BMI1002P02F

Verified stock: 0

Schneider Electric BMI1002P02F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including 220Vac, 240Vac, and 400Vac options. It offers a degree of protection rated at IP54 and IP65. The rated current varies with speed and voltage: 3.9A at 1900rpm and 208Vac, 3.5A at 3800rpm and 400Vac, and 3.25A at 4700rpm and 480Vac. This motor is designed for mounting with a 100x100mm flange and communicates via the HIPERFACE protocol. It has a net width of 100 mm. The rotational speed capabilities are 1900rpm at 208Vac, 3800rpm at 400Vac, and 4700rpm at 480Vac, with rated active power of 0.98kW/980W, 1.73kW/1730W, and 1.69kW/1690W, respectively. The maximum torque is 13.92Nm, with a stall torque of 4.99Nm, and operating torques of 4.91Nm at 1900rpm and 208Vac, 4.34Nm at 3800rpm and 400Vac, and 4Nm at 4700rpm and 480Vac. The moment of inertia is 6.77kg.cm.

Schneider Electric

FAQ

What is the price of BMI1002T31F?
Purchase the BMI1002T31F from Powermatic Associates at the price of $3,221.16. Order today.

Out if stock but available for backorder.

Schneider Electric BMI1002T31F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a keyed shaft, a holding brake, and double (2) motor stacks. The motor operates on a supply voltage of 115Vac-230Vac, including specific ratings of 120Vac, 200Vac, and 220Vac. It offers a degree of protection rated at IP65 and supports a rated current of 5.7A at 1400rpm with 115Vac and 4.59A at 3000rpm with 230Vac. The mounting mode is facilitated by a 100x100mm flange. Communication is enabled through the HIPERFACE protocol. The net width of the motor is 100 mm. It achieves rotational speeds of 1400rpm at 115Vac and 3000rpm at 230Vac, with rated active power of 0.75kW / 750W at 1400rpm with 115Vac and 1.3kW / 1300W at 3000rpm with 230Vac. The maximum torque is 12.39Nm, with a stall torque of 5.07Nm, and operational torques of 5.4Nm at 1400rpm with 115Vac and 4.4Nm at 3000rpm with 230Vac.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts