Powermatic Associates Logo

ILA2T571PB1F0 Schneider Electric Industrial Automation Components

ILA2T571PB1F0 on Powermatic Associates
Schneider Electric

Part#:ILA2T571PB1F0

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric ILA2T571PB1F0 is a DC servo motor within the Servo motors sub-range, featuring an integrated servo drive and DC motor. It is designed with a single-turn encoder (16384ppr), a smooth shaft, a holding brake, and a single (1) motor stack, optimized for medium rotation speed and medium torque. The connection type is a printed circuit board (P.C.B.) connector, and it supports the Modbus TCP communication protocol. It includes protection functions such as Safe Torque OFF (STO). The supply voltage ranges from 24Vdc to 48Vdc. This motor is designed for mounting with a 57x57mm flange. The net dimensions are 92.2 mm in height, 57.2 mm in width, and 190.8 mm in depth. It delivers a maximum torque of 0.44Nm, a moment of inertia of 0.165kg.cm2, and rotational speeds of 3200rpm at 24Vdc and 5100rpm at 48Vdc, with a stall torque of 0.62Nm.

Product Details

  • Range Of Product
    Lexium integrated drive
  • Gear Box Type
    Without
  • Circle Diameter Of The Mounting Holes
    2.62 in (66.6 mm)
  • Peak Stall Torque
    5.49 lbf.in (0.62 N.m)
  • Service Life In Hours
    20000 h bearing
  • Second Shaft
    Without second shaft end
  • Transmission Rate
    10, 100 Mbits
  • Communication Interface
    Modbus TCP, Integrated
  • Number Of Mounting Holes
    4
  • Shaft Diameter
    0.35 in (9 mm)
  • Discrete Output Voltage
    23...25 V
  • Maximum Radial Force Fr
    89 N
  • Phase
    Single phase
  • Feedback Type
    Single turn encoder
  • Supply Voltage Limits
    18…55.2 V
  • Voltage State 0 Guaranteed
    -3...4.5 V
  • Network Type
    DC
  • Holding Torque
    10.62 lbf.in (1.2 N.m) holding brake
  • Number Of Motor Stacks
    1
  • Associated Fuse Rating
    16 A
  • Continuous Stall Torque
    3.89 lbf.in (0.44 N.m)
  • Number Of Motor Poles
    6
  • Shaft End
    Untapped
  • Rotor Inertia
    0.165 kg.cm²
  • Mounting Support
    Flange
  • Nominal Torque
    3.89 lbf.in (0.44 N.m)
  • Motor Flange Size
    2.24 in (57 mm)
  • Device Short Name
    ILA
  • Commissioning Interface
    RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
  • Motor Type
    AC Synchronous Servo Motor
  • Winding Type
    Medium speed of rotation and medium torque
  • Centring Collar Depth
    0.06 in (1.6 mm)
  • Input/Output Type
    4 signals (each be used as input or output)
  • Shaft Length
    0.79 in (20 mm)
  • Electrical Connection
    Printed circuit board connector
  • Centring Collar Diameter
    1.97 in (50 mm)
  • Voltage State 1 Guaranteed
    15...30 V
  • Length
    7.51 in (190.8 mm)
  • Product Or Component Type
    Motion integrated drive
  • Holding Brake
    With
  • Mounting Holes Diameter
    0.20 in (5.2 mm)
  • Brake Release Time
    14 ms
  • Marking
    CE
  • Accuracy Error
    +/- 0.05 °
  • Brake Pull-In Power
    10 W
  • Net Weight
    3.09 lb(US) (1.4 kg)
  • Type Of Cooling
    Natural convection
  • Speed Feedback Resolution
    16384 points/turn
  • Brake Application Time
    13 ms
  • Nominal Speed
    3200 rpm 24 V 5100 rpm 48 V
  • Discrete Input Current
    10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
  • Maximum Axial Force Fa
    104 N force pressure) 104 N tensile force)
  • [Us] Rated Supply Voltage
    24 V 48 V
  • Current Consumption
    5000 mA maximum continuous 7000 mA peak
  • Maximum Switching Current
    100 mA per output 200 mA total
  • Protection Type
    Safe torque off Overload of output voltage Short circuit of the output voltage

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of ILA2T571PB1F0 on Powermatic Associates is $3,210.00. Order now.

ILA2T571PB1F0 Related Documents

Catalog-1631040692852.pdfProduct Datasheet-1631040692848.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
BDL36070 on Powermatic Associates

BDL36070

Schneider Electric

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDL sub-range, featuring a PowerPact B-Frame 100 TMD 3P 70A design for 600Y/347Vac with a 14kA breaking capacity and 80% rated Everlink (Creep compensating) lugs on both line and load sides. It has a rated impulse voltage (Uimp) of 8 kV and offers a degree of protection of IP40. The rated current is 70A, with a rated voltage (AC) of 600Vac 600Y/347Vac. It boasts a mechanical durability of 20,000 operations at no load and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) circuit breaker has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It falls under utilisation category A and features over-current protection fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 70 AT and an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mechanism. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

0 in stock
MFI1PRL17N4 on Powermatic Associates

MFI1PRL17N4

Schneider Electric

MForce MicroDrive Plus,MotCtl,48v

5 in stock
LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

1 in stock

Manufacturer warranty

ILA2T571PB1F0 Schneider Electric

$3,210.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$3,210.00

$3,210.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare ILA2T571PB1F0 with other Industrial Automation Components products

Range Of Product

Gear Box Type

Circle Diameter Of The Mo...

Peak Stall Torque

Service Life In Hours

Second Shaft

Transmission Rate

Communication Interface

Number Of Mounting Holes

Shaft Diameter

Selected product

ILA2T571PB1F0
Backordered
ILA2T571PB1F0
Schneider Electric

Schneider Electric ILA2T571PB1F0 is a DC servo motor within the Servo motors sub-range, featuring an...

Range Of ProductLexium integrated drive

Gear Box TypeWithout

Circle Diameter Of The Mounting Holes2.62 in (66.6 mm)

Peak Stall Torque5.49 lbf.in (0.62 N.m)

Service Life In Hours20000 h bearing

Second ShaftWithout second shaft end

Transmission Rate10, 100 Mbits

Communication InterfaceModbus TCP, Integrated

Number Of Mounting Holes4

Shaft Diameter0.35 in (9 mm)

M9F43306
2 in stock
M9F43306
Schneider Electric

Schneider Electric M9F43306 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designe...

Range Of Product-

Gear Box Type-

Circle Diameter Of The Mounting Holes-

Peak Stall Torque-

Service Life In Hours-

Second Shaft-

Transmission Rate-

Communication Interface-

Number Of Mounting Holes-

Shaft Diameter-

M9F43320
2 in stock
M9F43320
Schneider Electric

Schneider Electric M9F43320 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designe...

Range Of Product-

Gear Box Type-

Circle Diameter Of The Mounting Holes-

Peak Stall Torque-

Service Life In Hours-

Second Shaft-

Transmission Rate-

Communication Interface-

Number Of Mounting Holes-

Shaft Diameter-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

LMDCE852C on Powermatic Associates

LMDCE852C

Novanta IMS

Novanta IMS LMDCE852C is a stepper motor that falls under the hybrid stepper motors sub-range, featuring an integrated driver and a hybrid DC stepper motor design. It incorporates an incremental magnetic encoder, double motor stack, and operates on closed-loop hMTechnology. The connection options include a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting Ethernet/IP and Modbus TCP communication protocols. This stepper motor is designed for a supply voltage range of 12Vdc to 70Vdc, with optimal performance at 24Vdc and 48Vdc. It mounts via an 85x85mm flange and offers a degree of protection rated at IP65. The moment of inertia is specified at 1.35kg.cm^2 for standard torque, with a stall torque of 339N.cm and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

ILA2D571PC1A0 on Powermatic Associates

ILA2D571PC1A0

Verified stock: 0

Schneider Electric ILA2D571PC1A0 is a DC servo motor within the Servo motors sub-range, featuring an integrated servo drive and DC motor. It is designed with a single-turn encoder (16384ppr) with a smooth shaft and a single (1) motor stack, optimized for medium rotation speed and medium torque. The connection type is an industrial connector, and it supports the DeviceNet communication protocol. It includes protection functions such as Safe Torque OFF (STO). The servo motor operates on a supply voltage of 24Vdc-48Vdc and is mounted via a 57x57mm flange. The dimensions are 92.2 mm in height, 57.2 mm in width, and 145.3 mm in depth. It delivers a maximum torque of 0.44Nm, a moment of inertia of 0.095kg.cm2, and rotational speeds of 3200rpm at 24Vdc and 5100rpm at 48Vdc, with a stall torque of 0.62Nm.

Schneider Electric

ILA2D571PC2A0 on Powermatic Associates

ILA2D571PC2A0

Verified stock: 0

Schneider Electric ILA2D571PC2A0 is a DC servo motor within the Servo motors sub-range, featuring an integrated servo drive and DC motor. It is designed with a multi-turn encoder (16384ppr x 4096 turns), a smooth shaft, and a single motor stack, optimized for medium rotation speed and medium torque. The connection type is an industrial connector, and it supports the DeviceNet communication protocol. It includes protection functions such as Safe Torque OFF (STO). The supply voltage ranges from 24Vdc to 48Vdc. This servo motor is designed for mounting with a 57x57mm flange. The net dimensions are 92.2 mm in height, 57.2 mm in width, and 189.3 mm in depth. It delivers a maximum torque of 0.44Nm, a moment of inertia of 0.095kg.cm2, and rotational speeds of 3200rpm at 24Vdc and 5100rpm at 48Vdc, with a stall torque of 0.62Nm.

Schneider Electric

ILA2K572PC2A0 on Powermatic Associates

ILA2K572PC2A0

Verified stock: 0

Schneider Electric ILA2K572PC2A0 is a DC servo motor characterized by its integrated servo drive and DC motor functionality. It features a multi-turn encoder with 16384 pulses per revolution and 4096 turns, a smooth shaft, and a double motor stack designed for medium rotation speed and medium torque. The connection is facilitated through an industrial connector, and it supports Ethernet/IP for communication. This servo motor includes a Safe Torque OFF (STO) protection function. It operates on a supply voltage range of 24Vdc to 48Vdc. The mounting is done via a 57x57mm flange. The dimensions are 92.2 mm in height, 57.2 mm in width, and 207.8 mm in depth. It delivers a maximum torque of 0.78Nm, has a moment of inertia of 0.173kg.cm2, and offers rotational speeds of 1600rpm at 24Vdc and 3400rpm at 48Vdc, with a stall torque of 1.62Nm.

Schneider Electric

ILA2D571TC2A0 on Powermatic Associates

ILA2D571TC2A0

Verified stock: 0

Schneider Electric ILA2D571TC2A0 is a DC servo motor that falls under the Servo motors sub-range and features an integrated servo drive and DC motor. It is designed with a multi-turn encoder (16384ppr x 4096 turns) and a smooth shaft, configured as a single motor stack optimized for high rotation speed and low torque. The connection type is an industrial connector, and it supports the DeviceNet communication protocol. For safety, it includes the Safe Torque OFF (STO) protection function. The supply voltage ranges from 24Vdc to 48Vdc. It is designed for mounting with a 57x57mm flange. The dimensions are 92.2 mm in height, 57.2 mm in width, and 189.3 mm in depth. The maximum torque is 0.31Nm, with a moment of inertia of 0.095kg.cm2. The rotational speed can reach up to 5000rpm at 24Vdc and 7000rpm at 48Vdc, with a stall torque of 0.45Nm.

Schneider Electric

ILA2D571PB1A0 on Powermatic Associates

ILA2D571PB1A0

Verified stock: 0

Schneider Electric ILA2D571PB1A0 is a DC servo motor within the Servo motors sub-range, featuring an integrated servo drive and DC motor. It is designed with a single-turn encoder (16384ppr) with a smooth shaft and a single motor stack, optimized for medium rotation speed and medium torque. The connection type is a printed circuit board (P.C.B.) connector, and it supports the DeviceNet communication protocol. This motor includes protection functions such as Safe Torque OFF (STO). It operates on a supply voltage of 24Vdc to 48Vdc and is mounted via a 57x57mm flange. The dimensions are 92.2 mm in height, 57.2 mm in width, and 145.3 mm in depth. The maximum torque is 0.44Nm, with a moment of inertia of 0.095kg.cm2. The rotational speed varies between 3200rpm at 24Vdc and 5100rpm at 48Vdc, with a stall torque of 0.62Nm.

Schneider Electric

FAQ

What is the price of ILA2T571PB1F0?
Purchase the ILA2T571PB1F0 from Powermatic Associates at the price of $3,210.00. Order today.

Out if stock but available for backorder.

Schneider Electric ILA2T571PB1F0 is a DC servo motor within the Servo motors sub-range, featuring an integrated servo drive and DC motor. It is designed with a single-turn encoder (16384ppr), a smooth shaft, a holding brake, and a single (1) motor stack, optimized for medium rotation speed and medium torque. The connection type is a printed circuit board (P.C.B.) connector, and it supports the Modbus TCP communication protocol. It includes protection functions such as Safe Torque OFF (STO). The supply voltage ranges from 24Vdc to 48Vdc. This motor is designed for mounting with a 57x57mm flange. The net dimensions are 92.2 mm in height, 57.2 mm in width, and 190.8 mm in depth. It delivers a maximum torque of 0.44Nm, a moment of inertia of 0.165kg.cm2, and rotational speeds of 3200rpm at 24Vdc and 5100rpm at 48Vdc, with a stall torque of 0.62Nm.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

1 in stock