Powermatic Associates Logo

JJL26250C Schneider Electric Electronic Components

JJL26250C on Powermatic Associates
Schneider Electric

Part#:JJL26250C

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Circuit breaker, PowerPacT J, unit mount, thermal-magnetic, 250A, 2 pole, 25 kA, 600 VAC, 100% rated

Product Details

  • Breaking Capacity Code
    J
  • Width
    4.12 in (104.65 mm)
  • Height
    7.52 in (191.01 mm)
  • Magnetic Hold Current
    1250 A
  • Number Of Poles
    2P
  • Product Or Component Type
    Circuit breaker
  • Continuous Current Rating
    100 %
  • Tightening Torque
    230.12 lbf.in (26 N.m) 0.15…0.29 in² (95…185 mm²) (AWG 3/0...350 kcmil)
  • Magnetic Tripping Current
    2500 A
  • Depth
    5 in (127.00 mm)
  • Electrical Connection
    Lugs load Lugs line

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

JJL26250C Related Documents

Product Datasheet-1631034531856.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

6 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

JJL26250C Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare JJL26250C with other Electronic Components products

Breaking Capacity Code

Width

Height

Magnetic Hold Current

Number Of Poles

Product Or Component Type

Continuous Current Rating

Tightening Torque

Magnetic Tripping Current

Depth

Selected product

JJL26250C
Backordered
JJL26250C
Schneider Electric

Circuit breaker, PowerPacT J, unit mount, thermal-magnetic, 250A, 2 pole, 25 kA, 600 VAC, 100% rated

Breaking Capacity CodeJ

Width4.12 in (104.65 mm)

Height7.52 in (191.01 mm)

Magnetic Hold Current1250 A

Number Of Poles2P

Product Or Component TypeCircuit breaker

Continuous Current Rating100 %

Tightening Torque230.12 lbf.in (26 N.m) 0.15…...

Magnetic Tripping Current2500 A

Depth5 in (127.00 mm)

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity CodeJ

Width3.19 in (81 mm)

Height5.39 in (137 mm)

Magnetic Hold Current-

Number Of Poles3P

Product Or Component TypeCircuit breaker

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current-

Depth3.15 in (80 mm)

QOB330GFI5237
6 in stock
QOB330GFI5237
Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit B...

Breaking Capacity Code-

Width2.25 in (57.15 mm)

Height4.12 in (104.65 mm)

Magnetic Hold Current-

Number Of Poles3P

Product Or Component Type-

Continuous Current Rating-

Tightening Torque40.71 lbf.in (4.6 N.m) 0.00…...

Magnetic Tripping Current-

Depth2.91 in (73.91 mm)

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

JJL26225 on Powermatic Associates

JJL26225

Verified stock: 0

Square D by Schneider Electric JJL26225 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT JJL sub-range, featuring a PowerPacT J-Frame 250 TMD 2P 225A 600Vac 25kA design with lugs on both load and line sides for connection. This 2-pole (2P) circuit breaker offers thermal protection for overload scenarios and magnetic protection for short-circuit conditions. It has a rated current of 225A, with a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. Designed for individual unit mount on plate, it measures 191 mm in height, 105 mm in width, and 127 mm in depth, with a degree of protection of IP40. The operating mode is manual toggle, and it features over-current protection fixed at 225A and short-circuit pickup current adjustable between 1125A and 2250A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 225 AT, and the frame current rating is 250 AF. It has a short circuit breaking rating of 100kA (240Vac; UL489), 65kA (480Vac; UL489), 65kA (480Y/277Vac; UL489), 25kA (600Vac; UL489), 25kA (600Y/347Vac; UL489), and 20kA (250Vdc; UL489). The trip unit type is thermal-magnetic (adjustable) without a display, and it falls under utilisation category A.

Schneider Electric

JJL26150 on Powermatic Associates

JJL26150

Verified stock: 0

Square D by Schneider Electric JJL26150 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT JJL sub-range, featuring a PowerPact J-Frame design. This 2-pole (2P) circuit breaker is rated for 150A with a design that includes thermal (overload) and magnetic (short-circuit) protection functions. It supports a rated insulation voltage (Ui) of 750 V, an AC rated voltage of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. The JJL26150 offers a mounting mode as an individual unit mount on a plate, with dimensions of 191 mm in height, 105 mm in width, and 127 mm in depth. It provides a degree of protection of IP40 and operates via a toggle (manual) mechanism. Protection settings include over-current fixed at 150A and short-circuit pickup current adjustable between 750A and 1500A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. Its trip current rating is 150 AT, and it has a frame current rating of 250 AF. The short circuit breaking rating varies with voltage, offering 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all under UL489 standards. The trip unit type is thermal-magnetic (adjustable) without a display, and it falls under utilisation category A. Connections are facilitated by lugs on both load and line sides.

Schneider Electric

JJL26200 on Powermatic Associates

JJL26200

Verified stock: 0

Square D by Schneider Electric JJL26200 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT JJL sub-range, featuring a PowerPact J-Frame 250 TMD 2P 200A 600Vac 25kA design with lugs on both load and line sides for connection. This 2-pole (2P) circuit breaker offers thermal protection for overload scenarios and magnetic protection for short-circuit conditions. It has a rated current of 200A, with a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. Designed for individual unit mount on plate, it measures 191 mm in height, 105 mm in width, and 127 mm in depth, with a degree of protection of IP40. The operating mode is manual toggle, and it features over-current protection fixed at 200A and short-circuit pickup current adjustable between 1000A and 2000A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 200 AT, and the frame current rating is 250 AF. Its short circuit breaking rating varies with voltage, including 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (adjustable) without a display, and it falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

Circuit breaker, PowerPacT J, unit mount, thermal-magnetic, 250A, 2 pole, 25 kA, 600 VAC, 100% rated

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock