Powermatic Associates Logo

JLL26225C Schneider Electric Electronic Components

JLL26225C on Powermatic Associates
Schneider Electric

Part#:JLL26225C

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

MOLDED CASE CIRCUIT BREAKER 600V 225A

Product Details

  • Electrical Connection
    Lugs load Lugs line
  • Continuous Current Rating
    100 %
  • Depth
    5 in (127.00 mm)
  • Magnetic Tripping Current
    2250 A
  • Magnetic Hold Current
    1125 A
  • Height
    7.52 in (191.01 mm)
  • Width
    4.12 in (104.65 mm)
  • Tightening Torque
    230.12 lbf.in (26 N.m) 0.15…0.29 in² (95…185 mm²) (AWG 3/0...350 kcmil)
  • Number Of Poles
    2P
  • Breaking Capacity Code
    L
  • Product Or Component Type
    Circuit breaker

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

JLL26225C Related Documents

Product Datasheet-1631038739030.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock

Manufacturer warranty

JLL26225C Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare JLL26225C with other Electronic Components products

Electrical Connection

Continuous Current Rating

Depth

Magnetic Tripping Current

Magnetic Hold Current

Height

Width

Tightening Torque

Number Of Poles

Breaking Capacity Code

Selected product

JLL26225C
Backordered
JLL26225C
Schneider Electric

MOLDED CASE CIRCUIT BREAKER 600V 225A

Electrical ConnectionLugs load Lugs line

Continuous Current Rating100 %

Depth5 in (127.00 mm)

Magnetic Tripping Current2250 A

Magnetic Hold Current1125 A

Height7.52 in (191.01 mm)

Width4.12 in (104.65 mm)

Tightening Torque230.12 lbf.in (26 N.m) 0.15…...

Number Of Poles2P

Breaking Capacity CodeL

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Continuous Current Rating80 %

Depth4.36 in (110.74 mm)

Magnetic Tripping Current850 A

Magnetic Hold Current400 A

Height6.4 in (162.56 mm)

Width4.12 in (104.65 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Number Of Poles3P

Breaking Capacity CodeD

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Continuous Current Rating80 %

Depth3.15 in (80 mm)

Magnetic Tripping Current-

Magnetic Hold Current-

Height5.39 in (137 mm)

Width3.19 in (81 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Number Of Poles3P

Breaking Capacity CodeJ

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

JLL26000S25 on Powermatic Associates

JLL26000S25

Verified stock: 0

Square D by Schneider Electric JLL26000S25 is a front-operated toggle moulded case non-fusible automatic switch-disconnector designed under the PowerPacT JLL sub-range. This part, featuring a PowerPact J-Frame 250 TMD 2P 250A 600Vac 50kA with lugs on both load and line sides, is built for a 2-pole (2P) configuration. It has a rated current of 250A, with a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. The switch-disconnector is designed for individual unit mount on plate, with dimensions of 235 mm in height, 115 mm in width, and 128 mm in depth. It offers a degree of protection of IP40 and operates manually via a toggle. The rated operating voltage (Ue) is 600 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating and frame current rating are both 250 AT and 250 AF, respectively. It has a short circuit breaking rating of 125kA at 240Vac, 100kA at 480Vac and 480Y/277Vac, 50kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The utilisation category is A.

Schneider Electric

JLL26150 on Powermatic Associates

JLL26150

Verified stock: 0

Square D by Schneider Electric JLL26150 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT JLL sub-range, featuring a PowerPact J-Frame 250 TMD 2P 150A 600Vac 50kA design with lugs on both load and line sides for connection. This 2-pole circuit breaker offers thermal protection for overload scenarios and magnetic protection for short-circuit conditions. It has a rated current of 150A, with a rated insulation voltage of 750 V and a rated voltage for AC applications at 600Vac and 600Y/347Vac. Designed for individual unit mount on plate, it measures 191 mm in height, 105 mm in width, and 127 mm in depth. The device operates with a toggle mechanism, has a degree of protection of IP40, and features over-current protection fixed at 150A and short-circuit pickup current adjustable between 750A and 1500A. Its rated operating voltage is 690 V, with a rated impulse voltage of 8 kV. The trip current rating is set at 150 AT, with a frame current rating of 250 AF. It boasts a short circuit breaking rating across various voltages, including 125kA at 240Vac, 100kA at 480Vac, 100kA at 480Y/277Vac, 50kA at 600Vac, 50kA at 600Y/347Vac, 20kA at 250Vdc, and 50kA at 500Vdc, according to UL489 standards. The trip unit employs thermal-magnetic technology, adjustable, without a display, and falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

MOLDED CASE CIRCUIT BREAKER 600V 225A

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock