LC1F400G7 Schneider Electric Electronic Components

Product Details

• Range
  TeSys
• Rated Breaking Capacity
  3200 A IEC 60947-4-1
• Mounting Support
  Plate
• Maximum Operating Rate
  2400 cyc/h 131 °F (55 °C)
• Product Name
  TeSys F
• Poles Description
  3P
• [Ith] Conventional Free Air Thermal Current
  500 A 104 °F (40 °C)
• Inrush Power In VA
  1075 VA 40...400 Hz 0.9 68 °F (20 °C))
• Compatibility Code
  LC1F
• Motor Starter Type
  Direct on-line contactor
• [Uimp] Rated Impulse Withstand Voltage
  8 kV
• Mechanical Durability
  10 Mcycles
• Product Or Component Type
  Contactor
• Device Short Name
  LC1F
• [Uc] Control Circuit Voltage
  120 V AC 40...400 Hz
• Hold-In Power Consumption In VA
  15 VA 40...400 Hz 0.9 68 °F (20 °C))
• Power Pole Contact Composition
  3 NO
• Contactor Coil Voltage
  120 V AC standard
• Overvoltage Category
  III
• Average Impedance
  0.26 mOhm - Ith 500 A 50 Hz
Heat Dissipation
14 W
Operating Time
40...65 ms closing 100...170 ms opening
Power Dissipation Per Pole
65 W AC-1 42 W AC-3
Contactor Application
Motor control Resistive load
[Ui] Rated Insulation Voltage
1000 V IEC 60947-4-1 1500 V VDE 0110 group C
[Ie] Rated Operational Current
500 A 104 °F (40 °C)) <= 440 V AC AC-1 400 A 131 °F (55 °C)) <= 440 V AC AC-3
Associated Fuse Rating
400 A aM <= 440 V 500 A gG <= 440 V
[Ue] Rated Operational Voltage
<= 1000 V AC 50/60 Hz <= 460 V DC
Tightening Torque
Control circuit 10.62 lbf.in (1.2 N.m) Power circuit 309.78 lbf.in (35 N.m)
Control Circuit Voltage Limits
Operational 0.85...1.1 Uc 40...400 Hz 131 °F (55 °C)) Drop-out 0.3...0.5 Uc 40...400 Hz 131 °F (55 °C))
Utilisation Category
AC-4 AC-3 AC-1
Connections - Terminals
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)fl
Motor Power Range
110…220 kW 480…500 V 3 phase 110…220 kW 380…440 V 3 phase 110…220 kW 200…240 V 3 phase 250…500 kW 480…500 V 3 phase
[Icw] Rated Short-Time Withstand Current
3600 A 104 °F (40 °C) - 10 s 2400 A 104 °F (40 °C) - 30 s 1700 A 104 °F (40 °C) - 1 min 1200 A 104 °F (40 °C) - 3 min 1000 A 104 °F (40 °C) - 10 min
Standards
JIS C8201-4-1 EN 60947-1 IEC 60947-1 EN 60947-4-1 IEC 60947-4-1
Motor Power Kw
75 kW 400 V AC 50/60 Hz AC-4) 200 kW 380...400 V AC 50/60 Hz AC-3) 220 kW 415 V AC 50/60 Hz AC-3) 250 kW 440 V AC 50/60 Hz AC-3) 257 kW 500 V AC 50/60 Hz AC-3) 280 kW 660...690 V AC 50/60 Hz AC-3) 185 kW 1000 V AC 50/60 Hz AC
Product Certifications
ABS DNV RMRoS LROS (Lloyds register of shipping) UL BV CB CSA RINA UKCA

LC1F400G7 Related Documents