Powermatic Associates Logo

LC1D09BL Schneider Electric Industrial Automation Components

LC1D09BL on Powermatic Associates
Schneider Electric

Part#:LC1D09BL

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1D09BL is a magnetic contactor from the Deca sub-range designed with a low-consumption coil consuming less than 2.4W. It features screw connections and is equipped with 3 poles (3P; 3NO), supporting a rated current of 25A (AC-1) and 9A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 19.2-30Vdc (24Vdc nom.; 0.8...1.25 x Uc). The LC1D09BL can handle a rated operating voltage (Ue) up to 690 V and includes 1 Normally Open (NO) auxiliary contact. It is capable of withstanding a rated impulse voltage (Uimp) of 6 kV and delivers rated active power ranging from 2.2kW to 5.5kW across various AC voltages. Additionally, it features 1 Normally Closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power (HP) varies from 0.33HP to 7.5HP across different voltages and phases, adhering to UL/CSA standards. Its mechanical durability is rated at 15 million operations at no load, and its electrical durability at 2 million operations with load. The rated voltage (AC) - phase-to-phase is 690 V, and its power consumption is specified at 2.4 W.

Product Details

  • Signalling Circuit Frequency
    25...400 Hz
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • Poles Description
    3P
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Minimum Switching Voltage
    17 V signalling circuit
  • Average Impedance
    2.5 mOhm - Ith 25 A 50 Hz power circuit
  • Inrush Power In W
    2.4 W 68 °F (20 °C))
  • Power Pole Contact Composition
    3 NO
  • [Uc] Control Circuit Voltage
    24 V DC
  • Overvoltage Category
    III
  • Maximum Operating Rate
    3600 cyc/h 60 °C
  • Insulation Resistance
    > 10 MOhm for signalling circuit
  • Device Short Name
    LC1D
  • Rated Breaking Capacity
    250 A 440 V power circuit IEC 60947
  • Front Cover
    With
  • Mechanical Durability
    30 Mcycles
  • Time Constant
    40 ms
  • Product Name
    TeSys D
  • Control Circuit Type
    DC low consumption
  • Hold-In Power Consumption In W
    2.4 W 68 °F (20 °C)
  • Range
    TeSys
  • Product Or Component Type
    Contactor
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV IEC 60947
  • Minimum Switching Current
    5 mA signalling circuit
  • Operating Time
    65.45...88.55 ms closing 20...30 ms opening
  • Mounting Support
    Plate Rail
  • Contactor Application
    Resistive load Motor control
  • [Ie] Rated Operational Current
    9 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit 25 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
  • [Ith] Conventional Free Air Thermal Current
    25 A 140 °F (60 °C) power circuit 10 A 140 °F (60 °C) signalling circuit
  • Electrical Durability
    0.6 Mcycles 25 A AC-1 <= 440 V 2 Mcycles 9 A AC-3 <= 440 V
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Auxiliary Contacts Type
    type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1
  • [Ue] Rated Operational Voltage
    Power circuit: <= 690 V AC 25...400 Hz Power circuit: <= 300 V DC
  • Power Dissipation Per Pole
    1.56 W AC-1 0.2 W AC-3
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • Irms Rated Making Capacity
    250 A 440 V power circuit IEC 60947 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 25 A gG <= 690 V type 1 power circuit 20 A gG <= 690 V type 2 power circuit
  • Utilisation Category
    AC-3 AC-1 AC-4
  • Control Circuit Voltage Limits
    0.1...0.3 Uc -40…158 °F (-40…70 °C) drop-out DC 0.8...1.25 Uc -40…140 °F (-40…60 °C) operational DC 1...1.25 Uc 140…158 °F (60…70 °C) operational DC
  • Connections - Terminals
    Power circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Power circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end Power circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible
  • Tightening Torque
    Power circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Power circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lb
  • Standards
    CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
  • Motor Power Kw
    2.2 kW 220...230 V AC 50/60 Hz AC-3) 4 kW 380...400 V AC 50/60 Hz AC-3) 4 kW 415...440 V AC 50/60 Hz AC-3) 5.5 kW 500 V AC 50/60 Hz AC-3) 5.5 kW 660...690 V AC 50/60 Hz AC-3) 2.2 kW 400 V AC 50/60 Hz AC-4)
  • [Ui] Rated Insulation Voltage
    Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
  • [Icw] Rated Short-Time Withstand Current
    105 A 104 °F (40 °C) - 10 s power circuit 210 A 104 °F (40 °C) - 1 s power circuit 30 A 104 °F (40 °C) - 10 min power circuit 61 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circu
  • Motor Power HP (UL / CSA)
    1 hp 230/240 V at AC 50/60 Hz for 1 phase 2 hp 200/208 V at AC 50/60 Hz for 3 phase 2 hp 230/240 V at AC 50/60 Hz for 3 phase 5 hp 460/480 V at AC 50/60 Hz for 3 phase 7.5 hp 575/600 V at AC 50/60 Hz for 3 phase 0.33 hp 115 V at A
  • Product Certifications
    GL UL LROS (Lloyds register of shipping) CCC RINA BV GOST DNV CSA

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D09BL on Powermatic Associates is $128.43. Order now.

LC1D09BL Related Documents

Product Datasheet-1631038703523.pdfInstruction Sheet-1631038703518.pdfCatalog-1631038703534.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43306 on Powermatic Associates

M9F43306

Schneider Electric

Schneider Electric M9F43306 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed for three-phase applications with a 3 Pole configuration. It has a rated current of 6A and offers a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It features a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it utilizes a D tripping curve.

2 in stock

Manufacturer warranty

LC1D09BL Schneider Electric

$128.43

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$128.43

$128.43 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1D09BL with other Industrial Automation Components products

Signalling Circuit Freque...

Coil Technology

Poles Description

Auxiliary Contact Composi...

Minimum Switching Voltage

Average Impedance

Inrush Power In W

Power Pole Contact Compos...

[Uc] Control Circuit Volt...

Overvoltage Category

Selected product

LC1D09BL
Backordered
LC1D09BL
Schneider Electric

Schneider Electric LC1D09BL is a magnetic contactor from the Deca sub-range designed with a low-cons...

Signalling Circuit Frequency25...400 Hz

Coil TechnologyBuilt-in bidirectional peak ...

Poles Description3P

Auxiliary Contact Composition1 NO + 1 NC

Minimum Switching Voltage17 V signalling circuit

Average Impedance2.5 mOhm - Ith 25 A 50 Hz po...

Inrush Power In W2.4 W 68 °F (20 °C))

Power Pole Contact Composition3 NO

[Uc] Control Circuit Voltage24 V DC

Overvoltage CategoryIII

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

Signalling Circuit Frequency-

Coil Technology-

Poles Description3P

Auxiliary Contact Composition-

Minimum Switching Voltage-

Average Impedance-

Inrush Power In W-

Power Pole Contact Composition3 NO

[Uc] Control Circuit Voltage-

Overvoltage Category-

DFCC2
14 in stock
DFCC2
Schneider Electric

Schneider Electric - DFCC2

Signalling Circuit Frequency-

Coil Technology-

Poles Description2P

Auxiliary Contact Composition-

Minimum Switching Voltage-

Average Impedance-

Inrush Power In W-

Power Pole Contact Composition-

[Uc] Control Circuit Voltage-

Overvoltage Category-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

50.12.9.024.5000 on Powermatic Associates

50.12.9.024.5000

Finder

Finder 50.12.9.024.5000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.65A at 110Vdc and 0.2A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a degree of protection for single-phase applications. This relay supports a rated insulation voltage (Ui) of 250Vac and a mounting mode of 6 kV. It utilizes AgNi+Au (Gold plated silver-nickel) technology, indicating the contact material used. The component is designed for PCB mounting, has 2 poles, and does not specify a communication protocol. Its dimensions are tailored for PCB integration, and it boasts a mechanical resistance of 100,000 operations and a power dissipation/losses capacity of 10,000,000 operations.

0 in stock

Relevant products

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D50ABD on Powermatic Associates

LC1D50ABD

Verified stock: 0

Schneider Electric LC1D50ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor supports a rated current of 80A for AC-1 and 50A for 440Vac in AC-3 applications. It is designed for DIN rail mounting and has a net width of 55 mm. The device offers an IP20 degree of protection and operates with a control voltage of 18-30Vdc (24Vdc nominal). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. It delivers rated active power ranging from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3, and rated power in horsepower (HP) from 3HP at 115Vac to 40HP at 575-600Vac, covering various configurations and voltages for UL/CSA standards. The mechanical durability of the LC1D50ABD is rated at 6,000,000 operations, and its electrical durability with load is 1,450,000 operations. The rated voltage for phase-to-phase applications is 690 V.

Schneider Electric

LC1D65008B7 on Powermatic Associates

LC1D65008B7

Verified stock: 0

Schneider Electric LC1D65008B7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 4 poles (2NO+2NC). It has a rated current of 80A under AC-1 conditions and is suitable for DIN rail mounting. The contactor measures 85 mm in net width and offers an IP20 degree of protection. It operates with a control voltage range of 19.2-26.4Vac at 50Hz (24Vac nominal; 0.8...1.1 x Uc) and 20.4-26.4Vac at 60Hz (24Vac nominal; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 690 V, and it has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated impulse voltage (Uimp) is 6 kV, and it boasts a mechanical durability of 15,000,000 operations at no load. The rated voltage for phase-to-phase applications is 690 V AC.

Schneider Electric

LC1D80G6 on Powermatic Associates

LC1D80G6

Verified stock: 0

Schneider Electric LC1D80G6 is a magnetic contactor from the Deca sub-range, designed with screw connections and three poles (3P; 3NO). It has a rated current of 125A for AC-1 and 80A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection rated at IP20 and operates with a control voltage of 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it features 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW at 220-230Vac to 55kW at 500Vac in AC-3 conditions. The rated power in horsepower (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase conditions, according to UL/CSA standards. The mechanical durability of the LC1D80G6 is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage for phase-to-phase connections is 1000 V.

Schneider Electric

LC1D80G7 on Powermatic Associates

LC1D80G7

Verified stock: 0

Schneider Electric LC1D80G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 125A (AC-1) and 80A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor supports rated active power ranging from 22kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. The rated power (HP) varies from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac three-phase, under UL/CSA standards. It boasts a mechanical durability of 4,000,000 operations and an electrical durability of 1,500,000 operations with load, at a phase-to-phase rated voltage of 1000 V.

Schneider Electric

FAQ

What is the price of LC1D09BL?
Purchase the LC1D09BL from Powermatic Associates at the price of $128.43. Order today.

Out if stock but available for backorder.

Schneider Electric LC1D09BL is a magnetic contactor from the Deca sub-range designed with a low-consumption coil consuming less than 2.4W. It features screw connections and is equipped with 3 poles (3P; 3NO), supporting a rated current of 25A (AC-1) and 9A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 19.2-30Vdc (24Vdc nom.; 0.8...1.25 x Uc). The LC1D09BL can handle a rated operating voltage (Ue) up to 690 V and includes 1 Normally Open (NO) auxiliary contact. It is capable of withstanding a rated impulse voltage (Uimp) of 6 kV and delivers rated active power ranging from 2.2kW to 5.5kW across various AC voltages. Additionally, it features 1 Normally Closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power (HP) varies from 0.33HP to 7.5HP across different voltages and phases, adhering to UL/CSA standards. Its mechanical durability is rated at 15 million operations at no load, and its electrical durability at 2 million operations with load. The rated voltage (AC) - phase-to-phase is 690 V, and its power consumption is specified at 2.4 W.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

AFP0RC32T on Powermatic Associates

AFP0RC32T

Panasonic

Panasonic AFP0RC32T is a CPU unit within the C32 sub-range, featuring an integrated Programmable Logic Controller (PLC) with transistor outputs. It offers memory backup and self-diagnostic functions. The unit connects via a MIL connector and mini USB, and is designed for DIN rail mounting. It supports the RS-232 communication protocol and can handle up to 128 x I/O points and 3 x expansion units. The memory capacity is 32K steps for programs and 32765 words / 32K words for data, supporting up to 4096 x I/O points. It includes 16 x digital inputs (24Vdc; Sink/Source; with 6 x high-speed 50kHz counters) and 16 x digital outputs (24Vdc; NPN; 200mA transistor; with 4 x 50kHz Pulse outputs/axes + 4 x 4.8kHz; 1000 resolution PWM channels). There are also 6 x analog inputs (RTD Pt100 / RTD Pt1000 / RTD Ni1000 / Resistance; with 0.1K/°F / 0.01K/°F resolution). Programming is supported in Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). It features an 8-character password setting for program upload protection. Processing times are 80ns/step for basic instructions up to 3000 steps, with a minimum of 2.2µs, and 320ns/step for high-level instructions up to 3000 steps, with a minimum of 580ns/step for basic instructions after 3000 steps. Operating modes include periodical interrupt (0.5ms-1.5s) execution, interrupt program execution, constant scan execution, and program edition during RUN download in RUN mode.

5 in stock