LC1DT40E7 Schneider Electric Industrial Automation Components


Part#:LC1DT40E7
Manufacturer:Schneider Electric
Category:Industrial Automation Components
Product Lifecycle:Active
Product description
Schneider Electric LC1DT40E7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 4 poles (4NO) for circuit control. It has a rated current of 40A (AC-1) and is suitable for DIN rail mounting. The dimensions include a net width of 45 mm and it offers a degree of protection rated at IP20. The control voltage for AC ranges between 38.4-52.8Vac (48Vac nominal; 50Hz; 0.8...1.1 x Uc) and 40.8-52.8Vac (48Vac nominal; 60Hz; 0.85...1.1 x Uc). This contactor supports a rated operating voltage (Ue) of up to 690 V and includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, with the contacts type being 1NO+1NC instantaneous auxiliaries. It is designed to withstand a rated impulse voltage (Uimp) of 6 kV and has a mechanical durability of 15,000,000 operations at no load. The rated voltage (AC) for phase-to-phase connections is 690 V.
Product Details
- Mechanical Durability 15 Mcycles
- Product Name TeSys D
- Device Short Name LC1D
- Range TeSys
- Contactor Application Resistive load
- Power Pole Contact Composition 4 NO
- Utilisation Category AC-1
- [Uc] Control Circuit Voltage 48 V AC 50/60 Hz
- Minimum Switching Voltage 17 V signalling circuit
- [Uimp] Rated Impulse Withstand Voltage 6 kV IEC 60947
- Insulation Resistance > 10 MOhm for signalling circuit
- Poles Description 4P
- Average Impedance 2 mOhm - Ith 40 A 50 Hz power circuit
- Electrical Durability 1.4 Mcycles 40 A AC-1 <= 440 V
- Overvoltage Category III
- Coil Technology Without built-in suppressor module
- Minimum Switching Current 5 mA signalling circuit
- Auxiliary Contact Composition 1 NO + 1 NC
- Power Dissipation Per Pole 3.2 W AC-1
- Control Circuit Type AC at 50/60 Hz
- Rated Breaking Capacity 450 A 440 V power circuit IEC 60947
- Maximum Operating Rate 3600 cyc/h 140 °F (60 °C)
- Front Cover With
- Signalling Circuit Frequency 25...400 Hz
- Product Or Component Type Contactor
- [Ie] Rated Operational Current 40 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
- Heat Dissipation 2…3 W 50/60 Hz
- [Ue] Rated Operational Voltage Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
- Non-Overlap Time 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
- Mounting Support Plate Rail
- Inrush Power In VA 70 VA 60 Hz 0.75 68 °F (20 °C)) 70 VA 50 Hz 0.75 68 °F (20 °C))
- Hold-In Power Consumption In VA 7.5 VA 60 Hz 0.3 68 °F (20 °C)) 7 VA 50 Hz 0.3 68 °F (20 °C))
- Safety Reliability Level B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Auxiliary Contacts Type Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
- [Ith] Conventional Free Air Thermal Current 10 A 140 °F (60 °C) signalling circuit 40 A 140 °F (60 °C) power circuit
- Operating Time 4...19 ms opening 12...22 ms closing
- Irms Rated Making Capacity 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 450 A 440 V power circuit IEC 60947
- Connections - Terminals Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)fle
- Associated Fuse Rating 10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 40 A gG <= 690 V type 2 power circuit
- Control Circuit Voltage Limits 0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
- Tightening Torque Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 15.05 lbf.in (1.7 N.m) connector flat Ø 6 mm Power circuit 15.05 lbf.in (1.7 N.
- [Icw] Rated Short-Time Withstand Current 50 A 104 °F (40 °C) - 10 min power circuit 120 A 104 °F (40 °C) - 1 min power circuit 240 A 104 °F (40 °C) - 10 s power circuit 380 A 104 °F (40 °C) - 1 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
- Standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
- [Ui] Rated Insulation Voltage Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL Power circuit 690 V IEC 60947-4-1
- Product Certifications GOST GL DNV LROS (Lloyds register of shipping) UL CCC RINA BV CSA
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1DT40E7 on Powermatic Associates is $233.20. Order now.
LC1DT40E7 Related Documents
Similar products from: Schneider Electric Industrial Automation Components
Manufacturer warranty
LC1DT40E7 Schneider Electric
$233.20
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$233.20
$233.20 each
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare LC1DT40E7 with other Industrial Automation Components products
Mechanical Durability
Product Name
Device Short Name
Range
Contactor Application
Power Pole Contact Compos...
Utilisation Category
[Uc] Control Circuit Volt...
Minimum Switching Voltage
[Uimp] Rated Impulse With...
Selected product

LC1DT40E7
Schneider Electric
Schneider Electric LC1DT40E7 is a magnetic contactor from the Deca sub-range, featuring screw connec...
Mechanical Durability15 Mcycles
Product NameTeSys D
Device Short NameLC1D
RangeTeSys
Contactor ApplicationResistive load
Power Pole Contact Composition4 NO
Utilisation CategoryAC-1
[Uc] Control Circuit Voltage48 V AC 50/60 Hz
Minimum Switching Voltage17 V signalling circuit
[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947
About the manufacturer
Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...
Recently viewed products
Relevant products
FAQ
What is the price of LC1DT40E7?
Purchase the LC1DT40E7 from Powermatic Associates at the price of $233.20. Order today.
Out if stock but available for backorder.
Schneider Electric LC1DT40E7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 4 poles (4NO) for circuit control. It has a rated current of 40A (AC-1) and is suitable for DIN rail mounting. The dimensions include a net width of 45 mm and it offers a degree of protection rated at IP20. The control voltage for AC ranges between 38.4-52.8Vac (48Vac nominal; 50Hz; 0.8...1.1 x Uc) and 40.8-52.8Vac (48Vac nominal; 60Hz; 0.85...1.1 x Uc). This contactor supports a rated operating voltage (Ue) of up to 690 V and includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, with the contacts type being 1NO+1NC instantaneous auxiliaries. It is designed to withstand a rated impulse voltage (Uimp) of 6 kV and has a mechanical durability of 15,000,000 operations at no load. The rated voltage (AC) for phase-to-phase connections is 690 V.
Similar products from: Industrial Automation Components
What can I help you find today?