LC1DT40P7 Schneider Electric Industrial Automation Components

Product Details

• Product Or Component Type
  Contactor
• Overvoltage Category
  III
• Front Cover
  With
• Maximum Operating Rate
  3600 cyc/h 140 °F (60 °C)
• Insulation Resistance
  > 10 MOhm for signalling circuit
• Contactor Application
  Resistive load
• [Uimp] Rated Impulse Withstand Voltage
  6 kV IEC 60947
• Coil Technology
  Without built-in suppressor module
• Minimum Switching Current
  5 mA signalling circuit
• Utilisation Category
  AC-1
• Rated Breaking Capacity
  450 A 440 V power circuit IEC 60947
• Power Pole Contact Composition
  4 NO
• Poles Description
  4P
• Electrical Durability
  1.4 Mcycles 40 A AC-1 <= 440 V
• Mechanical Durability
  15 Mcycles
• Device Short Name
  LC1D
• Auxiliary Contact Composition
  1 NO + 1 NC
• [Ie] Rated Operational Current
  40 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
• Power Dissipation Per Pole
  3.2 W AC-1
• Range
  TeSys
[Uc] Control Circuit Voltage
230 V AC 50/60 Hz
Average Impedance
2 mOhm - Ith 40 A 50 Hz power circuit
Minimum Switching Voltage
17 V signalling circuit
Product Name
TeSys D
Control Circuit Type
AC at 50/60 Hz
Heat Dissipation
2…3 W 50/60 Hz
Signalling Circuit Frequency
25...400 Hz
Operating Time
4...19 ms opening 12...22 ms closing
Product Certifications
CCC LROS (Lloyds register of shipping) RINA UL DNV BV CSA GL GOST
Irms Rated Making Capacity
140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 450 A 440 V power circuit IEC 60947
Associated Fuse Rating
10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 40 A gG <= 690 V type 2 power circuit
Control Circuit Voltage Limits
0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
Standards
CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
[Ith] Conventional Free Air Thermal Current
10 A 140 °F (60 °C) signalling circuit 40 A 140 °F (60 °C) power circuit
Mounting Support
Rail Plate
[Ue] Rated Operational Voltage
Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
Inrush Power In VA
70 VA 60 Hz 0.75 68 °F (20 °C)) 70 VA 50 Hz 0.75 68 °F (20 °C))
Safety Reliability Level
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Hold-In Power Consumption In VA
7.5 VA 60 Hz 0.3 68 °F (20 °C)) 7 VA 50 Hz 0.3 68 °F (20 °C))
Auxiliary Contacts Type
Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
Non-Overlap Time
1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
Connections - Terminals
Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)fle
Tightening Torque
Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 15.05 lbf.in (1.7 N.m) connector flat Ø 6 mm Power circuit 15.05 lbf.in (1.7 N.
[Ui] Rated Insulation Voltage
Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL Power circuit 690 V IEC 60947-4-1
[Icw] Rated Short-Time Withstand Current
50 A 104 °F (40 °C) - 10 min power circuit 120 A 104 °F (40 °C) - 1 min power circuit 240 A 104 °F (40 °C) - 10 s power circuit 380 A 104 °F (40 °C) - 1 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ

LC1DT40P7 Related Documents