Powermatic Associates Logo

MGL26450ABSN Schneider Electric Electronic Components

MGL26450ABSN on Powermatic Associates
Schneider Electric

Part#:MGL26450ABSN

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact M Molded CASE CIRCUIT BREAKER 600V 450A 2P

Product Details

  • Breaking Capacity Code
    G
  • Product Or Component Type
    Circuit breaker
  • Number Of Poles
    2P
  • Continuous Current Rating
    80 %
  • Magnetic Tripping Current
    900…4500 A
  • Tightening Torque
    442.54 lbf.in (50 N.m) 0.15…0.37 in² (95…240 mm²) (AWG 3/0...500 kcmil)
  • Height
    12.86 in (326.6 mm)
  • Terminal Identifier
    AL800M23K
  • Depth
    8.27 in (210 mm)
  • Line Rated Current
    450 A
  • Width
    0.32 in (8.06 mm)
  • Electrical Connection
    Lugs load Lugs line

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

MGL26450ABSN Related Documents

Product Datasheet-1631031258560.pdfInstruction Sheet-1631031258558.pdfCatalog-1631031258562.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

6 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

MGL26450ABSN Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare MGL26450ABSN with other Electronic Components products

Breaking Capacity Code

Product Or Component Type

Number Of Poles

Continuous Current Rating

Magnetic Tripping Current

Tightening Torque

Height

Terminal Identifier

Depth

Line Rated Current

Selected product

MGL26450ABSN
Backordered
MGL26450ABSN
Schneider Electric

PowerPact M Molded CASE CIRCUIT BREAKER 600V 450A 2P

Breaking Capacity CodeG

Product Or Component TypeCircuit breaker

Number Of Poles2P

Continuous Current Rating80 %

Magnetic Tripping Current900…4500 A

Tightening Torque442.54 lbf.in (50 N.m) 0.15…...

Height12.86 in (326.6 mm)

Terminal IdentifierAL800M23K

Depth8.27 in (210 mm)

Line Rated Current450 A

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity CodeJ

Product Or Component TypeCircuit breaker

Number Of Poles3P

Continuous Current Rating80 %

Magnetic Tripping Current-

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Height5.39 in (137 mm)

Terminal Identifier-

Depth3.15 in (80 mm)

Line Rated Current35 A

QOB330GFI5237
6 in stock
QOB330GFI5237
Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit B...

Breaking Capacity Code-

Product Or Component Type-

Number Of Poles3P

Continuous Current Rating-

Magnetic Tripping Current-

Tightening Torque40.71 lbf.in (4.6 N.m) 0.00…...

Height4.12 in (104.65 mm)

Terminal Identifier-

Depth2.91 in (73.91 mm)

Line Rated Current-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

MGL26600 on Powermatic Associates

MGL26600

Verified stock: 0

Square D by Schneider Electric MGL26600 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact M-Frame 800 ET1 (LI) 2P 600A 600Vac design with a net height of 210 mm, width of 153 mm, and depth of 204 mm. This MCCB has a rated current of 600A and operates with a connection type of lugs on both load and line sides. It falls under the PowerPacT MGL sub-range and supports a rated voltage of 600Vac 600Y/347Vac with 2 poles (2P). The rated operating voltage (Ue) is 600 V, and it offers protection functions including L (Long-time protection) and I (Instantaneous protection) with a trip current rating of 600 AT. The frame current rating is 800 AF, and it has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, and 18kA at 600Y/347Vac, all according to UL489 standards. The trip unit type is an electronic ET1.0 (LI) with no display, and it is categorized under utilisation category A. Protection settings include L - Protection against overload fixed at 600A and I - Instantaneous protection against short-circuit adjustable from 1.5 to 12 times In (1200A to 6000A).

Schneider Electric

MGL26700 on Powermatic Associates

MGL26700

Verified stock: 0

Square D by Schneider Electric MGL26700 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate installation. It features the PowerPact M-Frame 800 ET1 (LI) 2P 700A 600Vac design with a net height of 210 mm, width of 153 mm, and depth of 204 mm. This MCCB has a rated current of 700A and operates with a connection type that includes lugs on both load and line sides. It belongs to the PowerPacT MGL sub-range and supports a rated voltage of 600Vac 600Y/347Vac. The device is equipped with two poles (2P) and has a rated operating voltage (Ue) of 600 V. Its protection functions include Long-time protection (L) and Instantaneous protection (I), with a trip current rating of 700 AT and a frame current rating of 800 AF. The short circuit breaking rating is specified as 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, and 18kA at 600Y/347Vac, all in accordance with UL489 standards. The trip unit type is an electronic ET1.0 (LI) with no display, and it offers protection settings against overload fixed at 700A and adjustable instantaneous protection against short-circuit ranging from 1.5 to 12 times the rated current (1200A to 6000A). It falls under the utilisation category A.

Schneider Electric

MGL26800 on Powermatic Associates

MGL26800

Verified stock: 0

Square D by Schneider Electric MGL26800 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact M-Frame 800 ET1 (LI) 2P design with a rated current of 800A and a connection type of lugs on both load and line sides. This MCCB falls under the PowerPacT MGL sub-range and has a rated voltage of 600Vac 600Y/347Vac. Its dimensions are 210 mm in height, 153 mm in width, and 204 mm in depth. The MGL26800 is a 2-pole (2P) device with a rated operating voltage (Ue) of 600 V. It offers protection functions including L (Long-time protection) and I (Instantaneous protection) with a trip current rating of 800 AT and a frame current rating of 800 AF. The short circuit breaking rating is specified as 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, and 18kA at 600Y/347Vac, all in accordance with UL489. The trip unit type is an electronic ET1.0 (LI) with no display, and it is categorized under utilisation category A. Protection settings include L - Protection against overload fixed at 800A and I - Instantaneous protection against short-circuit adjustable from 0.2 to 1 x In (1200A to 6000A).

Schneider Electric

MGL26400 on Powermatic Associates

MGL26400

Verified stock: 0

Square D by Schneider Electric MGL26400 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact M-Frame 800 ET1 (LI) 2P design with a rated current of 400A and a connection type of lugs on both load and line sides. This MCCB falls under the PowerPacT MGL sub-range and has a rated voltage of 600Vac 600Y/347Vac. The dimensions include a net height of 210 mm, a net width of 153 mm, and a net depth of 204 mm. It is a 2-pole (2P) device with a rated operating voltage (Ue) of 600 V. The protection functions include L (Long-time protection) and I (Instantaneous protection), with a trip current rating of 400 AT and a frame current rating of 800 AF. The short circuit breaking rating is specified as 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, and 18kA at 600Y/347Vac, all in accordance with UL489. The trip unit type is an electronic ET1.0 (LI) with no display, and it offers protection settings of L - fixed at 400A for overload protection and I - adjustable 1.5...12 x In (800A...4000A) for instantaneous protection against short-circuit. The utilisation category is A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact M Molded CASE CIRCUIT BREAKER 600V 450A 2P

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock