Powermatic Associates Logo

MGL36800AASA Schneider Electric Electronic Components

MGL36800AASA on Powermatic Associates
Schneider Electric

Part#:MGL36800AASA

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact M Molded CASE CIRCUIT BREAKER 600V 800A 3P

Product Details

  • Breaking Capacity
    65 kA 240 V AC 35 kA 480 V AC 18 kA 600 V AC
  • Accessory Type
    Auxiliary switch 24 V 1 NO + 1 NC Shunt trip 110/130 V AC
  • Electrical Connection
    Lugs load Lugs line
  • Depth
    8.27 in (210 mm)
  • Width
    0.32 in (8.06 mm)
  • Height
    12.86 in (326.6 mm)
  • Tightening Torque
    442.54 lbf.in (50 N.m) 0.15…0.37 in² (95…240 mm²) (AWG 3/0...500 kcmil)
  • Terminal Identifier
    AL800M23K
  • AWG Gauge
    AWG 3/0...500 kcmil aluminium/copper)3
  • Magnetic Tripping Current
    1600…8000 A
  • Circuit Breaker Type
    M-frame
  • Continuous Current Rating
    80 %
  • Poles Description
    3P
  • Mounting Mode
    Unit mount
  • Rated Current
    800 A
  • Rated Operational Voltage
    600 V AC
  • Current Sensor Rating Range
    800 A
  • Trip Unit Technology
    Electronic, basic, ET 1.0, LI
  • Range
    PowerPact M
  • Breaking Capacity Code
    G
  • Product Type
    Circuit breaker

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

MGL36800AASA Related Documents

Product Datasheet-1631031464037.pdfInstruction Sheet-1631031464033.pdfCatalog-1631031464039.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock

Manufacturer warranty

MGL36800AASA Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare MGL36800AASA with other Electronic Components products

Breaking Capacity

Accessory Type

Electrical Connection

Depth

Width

Height

Tightening Torque

Terminal Identifier

AWG Gauge

Magnetic Tripping Current

Selected product

MGL36800AASA
Backordered
MGL36800AASA
Schneider Electric

PowerPact M Molded CASE CIRCUIT BREAKER 600V 800A 3P

Breaking Capacity65 kA 240 V AC 35 kA 480 V A...

Accessory TypeAuxiliary switch 24 V 1 NO +...

Electrical ConnectionLugs load Lugs line

Depth8.27 in (210 mm)

Width0.32 in (8.06 mm)

Height12.86 in (326.6 mm)

Tightening Torque442.54 lbf.in (50 N.m) 0.15…...

Terminal IdentifierAL800M23K

AWG GaugeAWG 3/0...500 kcmil aluminiu...

Magnetic Tripping Current1600…8000 A

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity100 kA 208Y/120 V AC 50/60 H...

Accessory Type-

Electrical Connection-

Depth-

Width-

Height-

Tightening Torque-

Terminal Identifier-

AWG Gauge-

Magnetic Tripping Current-

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity-

Accessory Type-

Electrical Connection-

Depth-

Width-

Height-

Tightening Torque-

Terminal Identifier-

AWG Gauge-

Magnetic Tripping Current-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

MGL36300 on Powermatic Associates

MGL36300

Verified stock: 0

Square D by Schneider Electric MGL36300 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact M-Frame 800 ET1 (LI) 3P 300A 600Vac design with a net height of 210 mm, width of 153 mm, and depth of 204 mm. This MCCB has a rated current of 300A and operates with a connection type of lugs on both load and line sides. It falls under the PowerPacT MGL sub-range and supports a rated voltage of 600Vac 600Y/347Vac. The MGL36300 is a 3-pole (3P) device with a rated operating voltage (Ue) of 600 V. It offers protection functions including L (Long-time protection) and I (Instantaneous protection) with a trip current rating of 300 AT and a frame current rating of 800 AF. Its short circuit breaking rating is specified as 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, and 18kA at 600Vac and 600Y/347Vac, all in accordance with UL489. The trip unit type is an electronic ET1.0 (LI) with no display, and it is categorized under utilisation category A. Protection settings include L - Protection against overload fixed at 300A and I - Instantaneous protection against short-circuit adjustable from 1.5 to 12 times In (800A to 4000A).

Schneider Electric

MGL36450 on Powermatic Associates

MGL36450

Verified stock: 0

Square D by Schneider Electric MGL36450 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate installation. It features a PowerPact M-Frame 800 ET1 (LI) 3P 450A 600Vac design with a net height of 210 mm, width of 153 mm, and depth of 204 mm. This MCCB has a rated current of 450A and operates with lugs on both load and line sides for connection. It falls under the PowerPacT MGL sub-range and supports a rated voltage of 600Vac 600Y/347Vac. The device is equipped with three poles (3P) and has a rated operating voltage (Ue) of 600 V. Its protection functions include Long-time protection (L) and Instantaneous protection (I), with a trip current rating of 450 AT and a frame current rating of 800 AF. The short circuit breaking rating is specified as 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, and 18kA at 600Y/347Vac, all in accordance with UL489. The trip unit type is an electronic ET1.0 (LI) with no display, and it offers protection settings against overload fixed at 450A and adjustable instantaneous protection against short-circuit from 1.5 to 12 times In (1200A to 6000A). It is categorized under utilisation category A.

Schneider Electric

MGL36600 on Powermatic Associates

MGL36600

Verified stock: 0

Square D by Schneider Electric MGL36600 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features the PowerPact M-Frame 800 ET1 (LI) 3P 600A 600Vac design with a net height of 210 mm, width of 153 mm, and depth of 204 mm. This MCCB has a rated current of 600A and operates with a connection type of lugs on both load and line sides. It falls under the PowerPacT MGL sub-range and supports a rated voltage of 600Vac 600Y/347Vac. The MGL36600 is a 3-pole (3P) device with a rated operating voltage (Ue) of 600 V. It offers protection functions including L (Long-time protection) and I (Instantaneous protection) with a trip current rating of 600 AT and a frame current rating of 800 AF. Its short circuit breaking rating is specified as 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, and 18kA at 600Y/347Vac, all in accordance with UL489. The trip unit type is an electronic ET1.0 (LI) with no display, and it features utilisation category A. Protection settings include L - Protection against overload fixed at 600A and I - Instantaneous protection against short-circuit adjustable from 1.5 to 12 times In (1200A to 6000A).

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact M Molded CASE CIRCUIT BREAKER 600V 800A 3P

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock