Powermatic Associates Logo

QGL32200LU Schneider Electric Electronic Components

QGL32200LU on Powermatic Associates
Schneider Electric

Part#:QGL32200LU

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact Q - molded case circuit breaker - 3-pole - 65 kA - 240 V - 200 A

Product Details

  • Height
    6.47 in (164.34 mm)
  • Tightening Torque
    247.82 lbf.in (28 N.m) 0.04…0.23 in² (25…150 mm²) (AWG 4...300 kcmil)
  • Magnetic Hold Current
    1200 A
  • Depth
    3.93 in (99.82 mm)
  • Trip Unit Technology
    Thermal-magnetic
  • Product Or Component Type
    Circuit breaker
  • Continuous Current Rating
    80 %
  • Breaking Capacity Code
    G
  • Line Rated Current
    200 A
  • Width
    4.5 in (114.30 mm)
  • Magnetic Tripping Current
    2400 A

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

QGL32200LU Related Documents

Catalog-1631029381032.pdfProduct Datasheet-1631029380996.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

6 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

QGL32200LU Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare QGL32200LU with other Electronic Components products

Height

Tightening Torque

Magnetic Hold Current

Depth

Trip Unit Technology

Product Or Component Type

Continuous Current Rating

Breaking Capacity Code

Line Rated Current

Width

Selected product

QGL32200LU
Backordered
QGL32200LU
Schneider Electric

PowerPact Q - molded case circuit breaker - 3-pole - 65 kA - 240 V - 200 A

Height6.47 in (164.34 mm)

Tightening Torque247.82 lbf.in (28 N.m) 0.04…...

Magnetic Hold Current1200 A

Depth3.93 in (99.82 mm)

Trip Unit TechnologyThermal-magnetic

Product Or Component TypeCircuit breaker

Continuous Current Rating80 %

Breaking Capacity CodeG

Line Rated Current200 A

Width4.5 in (114.30 mm)

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Height5.39 in (137 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Hold Current-

Depth3.15 in (80 mm)

Trip Unit TechnologyThermal-magnetic

Product Or Component TypeCircuit breaker

Continuous Current Rating80 %

Breaking Capacity CodeJ

Line Rated Current35 A

Width3.19 in (81 mm)

M9U31110
1 in stock
M9U31110
Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Height3.19 in (81 mm)

Tightening Torque22.13 lbf.in (2.5 N.m) top o...

Magnetic Hold Current-

Depth2.87 in (73 mm)

Trip Unit TechnologyThermal-magnetic

Product Or Component TypeMiniature circuit-breaker

Continuous Current Rating-

Breaking Capacity Code-

Line Rated Current10 A 77 °F (25 °C) EN/IEC 60...

Width0.71 in (18 mm)

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

QGL32100 on Powermatic Associates

QGL32100

Verified stock: 0

Square D by Schneider Electric QGL32100 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 100A 240Vac 65kA with lugs 80% rated, ensuring a net height of 114 mm, width of 164 mm, and depth of 100 mm. This 3-pole (3P) MCCB has a rated current of 100A and operates at a rated voltage of 240Vac. It includes lugs on both load and line sides for connections. The QGL32100 falls under the PowerPacT QGL sub-range and offers thermal protection for overload and magnetic protection for short-circuit with a trip current rating of 100 AT. Its frame current rating is 250 AF, and it has a short circuit breaking rating of 65kA at 240Vac according to UL489. The trip unit type is thermal-magnetic (fixed) without a display. It is categorized under utilisation category A, with over-current protection settings fixed at 100A and short-circuit protection settings fixed at 1200A for hold current and 2400A for trip current.

Schneider Electric

QGL32200 on Powermatic Associates

QGL32200

Verified stock: 0

Square D by Schneider Electric QGL32200 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 200A 240Vac 65kA with lugs 80% rated, ensuring a net height of 114 mm, width of 164 mm, and depth of 100 mm. This MCCB, part of the PowerPacT QGL sub-range, operates with a rated current of 200A and a connection type that includes lugs on both load and line sides. It supports a rated voltage (AC) of 240Vac and is equipped with 3 poles (3P), with a rated operating voltage (Ue) of 240 V. The protection functions include thermal protection for overload and magnetic protection for short-circuit, with a trip current rating of 200 AT and a frame current rating of 250 AF. Its short circuit breaking rating stands at 65kA (240Vac; UL489). The trip unit type is a fixed thermal-magnetic technology without a display. It falls under utilisation category A, with protection settings over-current fixed at 200A, short-circuit hold current fixed at 1200A, and short-circuit trip current fixed at 2400A.

Schneider Electric

QGL32070 on Powermatic Associates

QGL32070

Verified stock: 0

Square D by Schneider Electric QGL32070 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 70A 240Vac 65kA with lugs 80% rated, ensuring a net height of 114 mm, width of 164 mm, and depth of 100 mm. This MCCB has a rated current of 70A and operates with a connection type of lugs on both load and line sides. It falls under the PowerPacT QGL sub-range, with a rated voltage (AC) of 240Vac and three poles (3P). The rated operating voltage (Ue) is 240 V. It offers protection functions including thermal protection for overload and magnetic protection for short-circuit, with a trip current rating of 70 AT. The frame current rating is 250 AF, and it has a short circuit breaking rating of 65kA (240Vac; UL489). The trip unit type is thermal-magnetic (fixed) with no display. It is categorized under utilisation category A, with protection settings over-current fixed at 70A, protection against short-circuit hold current fixed at 1000A, and protection against short-circuit trip current fixed at 1800A.

Schneider Electric

QGL32080 on Powermatic Associates

QGL32080

Verified stock: 0

Square D by Schneider Electric QGL32080 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 80A 240Vac 65kA with lugs on both load and line sides, ensuring a secure connection. This MCCB has a net height of 114 mm, a width of 164 mm, and a depth of 100 mm. It operates with a rated current of 80A and a rated voltage of 240Vac. The QGL32080 is equipped with three poles (3P) and offers thermal protection for overload and magnetic protection for short-circuit conditions. Its trip current rating is 80 AT, with a frame current rating of 250 AF. The short circuit breaking rating stands at 65kA (240Vac; UL489). This MCCB utilizes a thermal-magnetic trip unit type without a display and is classified under the utilisation category A. Protection settings are fixed, with over-current protection at 80A, short-circuit hold current fixed at 1000A S, and short-circuit trip current fixed at 1800A.

Schneider Electric

QGL32175 on Powermatic Associates

QGL32175

Verified stock: 0

Square D by Schneider Electric QGL32175 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 175A 240Vac 65kA with lugs 80% rated, ensuring a net height of 114 mm, width of 164 mm, and depth of 100 mm. This MCCB, part of the PowerPacT QGL sub-range, operates with a rated current of 175A and a connection type of lugs on both load and line sides. It supports a rated voltage (AC) of 240Vac, with 3 poles (3P) and a rated operating voltage (Ue) of 240 V. The protection functions include thermal protection for overload and magnetic protection for short-circuit, with a trip current rating of 175 AT and a frame current rating of 250 AF. Its short circuit breaking rating stands at 65kA (240Vac; UL489). The trip unit type is thermal-magnetic (fixed) with no display, categorized under utilisation category A. Protection settings are over-current fixed at 175A, short-circuit hold current fixed at 1200A, and short-circuit trip current fixed at 2400A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact Q - molded case circuit breaker - 3-pole - 65 kA - 240 V - 200 A

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock