RM17JC00MW Schneider Electric Industrial Automation Components

Product Details

• Output Contacts
  1 C/O
• Minimum Switching Current
  10 mA 5 V DC
• Maximum Power Consumption In VA
  3 VA
• Operating Voltage Tolerance
  - 15 % + 10 % Un
• Measurement Accuracy
  +/- 10 % of the full scale value
• Operating Position
  Any position without derating
• [Us] Rated Supply Voltage
  24...240 V AC/DC 50/60 Hz +/- 10 %
• Maximum Power Consumption In W
  1 W
• Relay Monitored Parameters
  Overcurrent detection
• Response Time
  < 200 ms (in the event of a fault)
• Range Of Product
  Harmony Control Relays
• Control Circuit Frequency
  40...70 Hz sinusoidal
• Electrical Durability
  100000 cycles
• Relay Name
  RM17JC
• Maximum Switching Voltage
  250 V AC/DC
• Nominal Output Current
  5 A
• Tightening Torque
  5.31…8.85 lbf.in (0.6…1 N.m) IEC 60947-1
• Relay Type
  Current control relay
• Measurement Range
  2...20 A current
• Hysteresis
  15 % fixed threshold setting
Insulation
Between supply and measurement
Mechanical Durability
30000000 cycles
Product Or Component Type
Current control relay
Supply Voltage Limits
20.4…264 V AC/DC
Maximum Measuring Cycle
30 ms measurement cycle as true rms value
Net Weight
0.29 lb(US) (0.13 kg)
Switching Capacity In VA
1250 VA
Contacts Type And Composition
1 C/O
Delay At Power Up
0.5 s
Overvoltage Category
III IEC 60664-1
Width
0.69 in (17.5 mm)
Housing Material
Self-extinguishing plastic
Time Delay
Without
Repeat Accuracy
+/- 0.5 % input and measurement circuit
Polarity
Yes DC
Mounting Support
35 mm symmetrical DIN rail conforming to EN/IEC 60715
Operating Rate
<= 360 operations/hour full load
Contacts Material
Cadmium free
Threshold Setting
10...100 %
[Ui] Rated Insulation Voltage
400 V IEC 60664-1
Measurement Error
+/- 0.05 %/°C with temperature variation < 1 % over the whole range with voltage variation
Input Current
100000 mA permanent at 25 °C 300000 mA non repetitive < 3 s at 25 °C
Insulation Resistance
> 500 MOhm 500 V DC IEC 60255-5 > 500 MOhm 500 V DC IEC 60664-1
Marking
CE : 73/23/EEC CE : EMC 89/336/EEC
Local Signalling
for power ON LED (green) for relay ON LED (yellow)
Connections - Terminals
Screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end Sc
Utilisation Category
AC-12 IEC 60947-5-1 AC-13 IEC 60947-5-1 AC-14 IEC 60947-5-1 AC-15 IEC 60947-5-1 DC-12 IEC 60947-5-1 DC-13 IEC 60947-5-1 DC-14 IEC 60947-5-1

RM17JC00MW Related Documents