Powermatic Associates Logo

TM5SDI16D Schneider Electric Industrial Automation Components

TM5SDI16D on Powermatic Associates
Schneider Electric

Part#:TM5SDI16D

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric TM5SDI16D is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically as a DC digital input module. It features a connection type that requires a removable spring terminal block, which is sold separately, and comes in a white color. The unit operates on a supply voltage of 19-30Vdc, with a nominal voltage of 24Vdc, and is mounted using a symmetrical DIN rail. It is designed to operate within an ambient air temperature range of +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing for operation up to +140°F (+60°C), and for vertical installation, it can operate up to +122°F (+50°C). The TM5SDI16D offers an IP20 degree of protection and consumes 36mA of current at 5Vdc via bus and 61mA at 24Vdc with all inputs ON. It includes 16 digital inputs (24Vdc; Sink), can be stored in environments with temperatures ranging from -40 to +158°F (-40 to +70°C), and tolerates humidity levels of 5-95% without condensation. The power dissipation/losses for this unit are calculated at 1.65 W.

Product Details

  • Color
    White
  • Range Of Product
    Modicon TM5
  • Net Weight
    0.06 lb(US) (0.025 kg)
  • Discrete Input Voltage
    24 V
  • Discrete Input Voltage Type
    DC
  • Electrical Connection
    1 wire
  • Discrete Input Logic
    Sink
  • Product Or Component Type
    Discrete input module
  • Marking
    CE
  • Input Impedance
    8.9 kOhm
  • Discrete Input Current
    2.68 mA
  • Discrete Input Number
    16
  • Maximum Power Dissipation In W
    1.65 W
  • Voltage State 1 Guaranteed
    >= 15 V
  • Voltage State 0 Guaranteed
    <= 5 V
  • Input Voltage Limits
    20.4...28.8 V
  • Current Consumption
    36 mA 5 V DC bus 61 mA 24 V DC all inputs On
  • Local Signalling
    1 LED green/red power supply 16 LEDs green input status
  • Input Filtering
    <= 25 ms configurable by software <= 100 ms hardware
  • Isolation
    500 Vrms AC insulation between channel and bus No insulation between channels
  • Range Compatibility
    PacDrive LMC motion controller Modicon M258 Modicon LMC058
  • Product Compatibility
    Motion controller PacDrive LMC Pro PacDrive LMC Pro 2 PacDrive LMC Eco Logic controller

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of TM5SDI16D on Powermatic Associates is $285.00. Order now.

TM5SDI16D Related Documents

Instruction Sheet-1631029827046.pdfProduct Datasheet-1631029827049.pdfCatalog-1631029827050.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock
M9XCTC15 on Powermatic Associates

M9XCTC15

Schneider Electric

Schneider Electric M9XCTC15 is a cover designed specifically for use with M9XC comb busbars. It belongs to the Comb busbars sub-range and serves as a Multi 9 - tooth cover. This product comes as a set of 5, tailored to enhance the application and integration of M9XC comb busbars within electrical installations.

10 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock

Manufacturer warranty

TM5SDI16D Schneider Electric

$285.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$285.00

$285.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare TM5SDI16D with other Industrial Automation Components products

Color

Range Of Product

Net Weight

Discrete Input Voltage

Discrete Input Voltage Ty...

Electrical Connection

Discrete Input Logic

Product Or Component Type

Marking

Input Impedance

Selected product

TM5SDI16D
Backordered
TM5SDI16D
Schneider Electric

Schneider Electric TM5SDI16D is an I/O unit categorized under the Modicon TM5 I/O modules sub-range,...

ColorWhite

Range Of ProductModicon TM5

Net Weight0.06 lb(US) (0.025 kg)

Discrete Input Voltage24 V

Discrete Input Voltage TypeDC

Electrical Connection1 wire

Discrete Input LogicSink

Product Or Component TypeDiscrete input module

MarkingCE

Input Impedance8.9 kOhm

ABL8RPS24100
4 in stock
ABL8RPS24100
Schneider Electric

Schneider Electric ABL8RPS24100 is a regulated switch mode power supply unit (SMPS PSU) within the A...

Color-

Range Of ProductModicon Power Supply

Net Weight-

Discrete Input Voltage-

Discrete Input Voltage Type-

Electrical Connection-

Discrete Input Logic-

Product Or Component TypePower supply

Marking-

Input Impedance-

BMI0703P02F
4 in stock
BMI0703P02F
Schneider Electric

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an ...

Color-

Range Of Product-

Net Weight-

Discrete Input Voltage-

Discrete Input Voltage Type-

Electrical Connection-

Discrete Input Logic-

Product Or Component TypeServo motor with power stage

Marking-

Input Impedance-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MDI1FRD23A7-N on Powermatic Associates

MDI1FRD23A7-N

Novanta IMS

Novanta IMS MDI1FRD23A7-N is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase DC stepper motor design. It includes a rear control knob and a single motor stack in its Plus version, which encompasses standard features. This part offers a connection through 30cm / 12" bare end flying leads with a 10-pin IDC non-locking connector. It supports RS-422 and RS-485 communication protocols. The supply voltage requirement ranges from 12Vdc to 75Vdc, with optimal performance at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with a 57x57mm flange. The operational ambient air temperature range is from 0 to +85°C. It has an IP20 degree of protection, a moment of inertia of 0.18kg.cm^2, a stall torque of 64N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

TM5SAI2H on Powermatic Associates

TM5SAI2H

Verified stock: 0

Schneider Electric TM5SAI2H is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically as an analog input module. It features a connection type that requires a removable spring terminal block, which is sold separately, and comes in a white color. The unit operates on a supply voltage range of 19-30Vdc, with a nominal voltage of 24Vdc, and is mounted using a symmetrical DIN rail. It is designed to operate within an ambient air temperature range of +32...+131°F / 0...+55°C for horizontal installation, with a derating factor allowing for temperatures up to +140°F / +60°C, and +32...+122°F / 0...+50°C for vertical installation. The TM5SAI2H offers a degree of protection rated at IP20 and has a current consumption of 2mA at 5Vdc via bus and 50mA at 24Vdc for input/output operations. It is equipped with 2 analog inputs that support -10...+10Vdc or 0-20mA signals with a resolution of 15-bit plus sign. The unit's ambient air temperature for storage is specified between -13...+158°F / -25...+70°C, and it can operate in humidity levels of 5-95% without condensation. The power dissipation or losses are calculated at 1.21 W.

Schneider Electric

TM5SDM4DTRFS on Powermatic Associates

TM5SDM4DTRFS

Verified stock: 0

Schneider Electric TM5SDM4DTRFS is a Safety I/O unit within the Modicon TM5 I/O modules sub-range. This unit functions as a Safety DC digital input/output (I/O) module and features a connection type of removable spring terminal block, which is sold separately. It is identifiable by its red color and operates on a supply voltage of 19-30Vdc, with 24Vdc nominal. Designed for symmetrical DIN rail mounting, it offers an IP20 degree of protection. The module includes 2 x digital outputs (24Vdc; NO relay contact outputs) and 2 x digital inputs (24Vdc; Sink), both equipped with short-circuit and overload protection functions. It is suitable for use in environments with an ambient air temperature for storage ranging from -40 to +158°F (-40 to +70°C) and a humidity range of 5-95% without condensation.

Schneider Electric

TM5SDO4T on Powermatic Associates

TM5SDO4T

Verified stock: 0

Schneider Electric TM5SDO4T is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically for DC digital output applications. This unit features a white color and utilizes a removable spring terminal block for connections, which is sold separately. It operates on a supply voltage range of 19-30Vdc, with a nominal voltage of 24Vdc, and can be mounted on a symmetrical DIN rail. The TM5SDO4T is equipped with four digital outputs, each capable of delivering 24Vdc at 500mA (Source). It has a current consumption of 32mA at 5Vdc via bus and 20mA at 24Vdc for input/output operations. The unit offers protection functions including reverse polarity, short-circuit, and overload protection. It operates efficiently within an ambient air temperature range of +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing operation up to +140°F (+60°C), and +14 to +122°F (-10 to +50°C) for vertical installation. The device is designed for storage in environments with temperatures ranging from -40 to +158°F (-40 to +70°C) and humidity levels of 5-95% without condensation. It has a degree of protection of IP20 and a power dissipation/loss of 0.86 W.

Schneider Electric

TM5SDO4TA on Powermatic Associates

TM5SDO4TA

Verified stock: 0

Schneider Electric TM5SDO4TA is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically for DC digital output applications. This unit features a white color and utilizes a removable spring terminal block connection type, which is sold separately. It operates on a supply voltage range of 19-30Vdc, with a nominal voltage of 24Vdc, and is mounted via symmetrical DIN rail. The TM5SDO4TA can function within an ambient air temperature range of +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing for temperatures up to +140°F (+60°C), and +14 to +122°F (-10 to +50°C) for vertical installation. It offers an IP20 degree of protection and includes 4 digital outputs (24Vdc 2A; Source) with a current consumption of 32mA at 5Vdc via bus and 21mA at 24Vdc for input/output. The unit is equipped with reverse polarity protection, overload protection, and short-circuit protection. It has a power dissipation/loss of 2.1 W and can be stored in conditions ranging from -40 to +158°F (-40 to +70°C) with a humidity range of 5-95% (without condensation).

Schneider Electric

FAQ

What is the price of TM5SDI16D?
Purchase the TM5SDI16D from Powermatic Associates at the price of $285.00. Order today.

Out if stock but available for backorder.

Schneider Electric TM5SDI16D is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically as a DC digital input module. It features a connection type that requires a removable spring terminal block, which is sold separately, and comes in a white color. The unit operates on a supply voltage of 19-30Vdc, with a nominal voltage of 24Vdc, and is mounted using a symmetrical DIN rail. It is designed to operate within an ambient air temperature range of +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing for operation up to +140°F (+60°C), and for vertical installation, it can operate up to +122°F (+50°C). The TM5SDI16D offers an IP20 degree of protection and consumes 36mA of current at 5Vdc via bus and 61mA at 24Vdc with all inputs ON. It includes 16 digital inputs (24Vdc; Sink), can be stored in environments with temperatures ranging from -40 to +158°F (-40 to +70°C), and tolerates humidity levels of 5-95% without condensation. The power dissipation/losses for this unit are calculated at 1.65 W.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts