Powermatic Associates Logo

TM5SDI6U Schneider Electric Electronic Components

TM5SDI6U on Powermatic Associates
Schneider Electric

Part#:TM5SDI6U

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Schneider Electric TM5SDI6U is an AC digital input module within the Modicon TM5 I/O modules sub-range. This unit features six digital inputs (100-120Vac; Sink) and utilizes a removable spring terminal block connection type, which is sold separately. It operates on a supply voltage of 85-264Vac (100-240Vac nominal) and is designed for symmetrical DIN rail mounting. The module is gray and has an IP20 degree of protection. It requires a current consumption of 42mA (at 5Vdc via bus) and has a power dissipation/loss of 0.89 W. The operational ambient air temperature ranges from +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing up to +140°F (-10 to +60°C), and +14 to +122°F (-10 to +50°C) for vertical installation. For storage, the temperature tolerance spans from -40 to +158°F (-40 to +70°C), and it can withstand humidity levels of 5-95% without condensation.

Product Details

  • Range Of Product
    Modicon TM5
  • Discrete Input Number
    6
  • Discrete Input Voltage
    100...120 V
  • Input Voltage Limits
    100...120 V
  • Discrete Input Voltage Type
    AC
  • Marking
    CE
  • Maximum Power Dissipation In W
    0.89 W
  • Color
    Black
  • Net Weight
    0.06 lb(US) (0.025 kg)
  • Discrete Input Current
    10 mA
  • Current Consumption
    42 mA 5 V DC bus
  • Product Or Component Type
    Discrete input module
  • Electrical Connection
    1 wire
  • Isolation
    1500 V AC insulation between channel and bus for 1 minute No insulation between channels
  • Input Filtering
    <= 25 ms configurable by software <= 30 ms hardware from state 1 to state 0 <= 15 ms hardware from state 0 to state 1
  • Local Signalling
    1 LED green power supply 1 LED red power supply 6 LEDs green input status
  • Range Compatibility
    Modicon LMC058 PacDrive LMC motion controller Modicon M258
  • Product Compatibility
    Logic controller PacDrive LMC Eco PacDrive LMC Pro 2 Motion controller PacDrive LMC Pro

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

TM5SDI6U Related Documents

Catalog-1631029976320.pdfInstruction Sheet-1631029976312.pdfProduct Datasheet-1631029976314.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
LC1F400P7 on Powermatic Associates

LC1F400P7

Schneider Electric

Schneider Electric LC1F400P7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features ring-lugs/bar connections and is equipped with 3 poles (3P; 3NO). The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. The control voltage (AC) specifications are 196-253Vac (230Vac nominal; 40-400Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V and a rated impulse voltage (Uimp) of 8 kV. It has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated active power ranges from 110kW at 220-230Vac to 280kW at 660-690Vac under AC-3 conditions, with a mechanical durability of 10,000,000 operations at no load. The rated voltage (AC) phase-to-phase is 1000 V.

2 in stock

Manufacturer warranty

TM5SDI6U Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare TM5SDI6U with other Electronic Components products

Range Of Product

Discrete Input Number

Discrete Input Voltage

Input Voltage Limits

Discrete Input Voltage Ty...

Marking

Maximum Power Dissipation...

Color

Net Weight

Discrete Input Current

Selected product

TM5SDI6U
Backordered
TM5SDI6U
Schneider Electric

Schneider Electric TM5SDI6U is an AC digital input module within the Modicon TM5 I/O modules sub-ran...

Range Of ProductModicon TM5

Discrete Input Number6

Discrete Input Voltage100...120 V

Input Voltage Limits100...120 V

Discrete Input Voltage TypeAC

MarkingCE

Maximum Power Dissipation In W0.89 W

ColorBlack

Net Weight0.06 lb(US) (0.025 kg)

Discrete Input Current10 mA

PS0509NBK
17 in stock
PS0509NBK
Hubbell

Kellems Wire Management, Liquidtight System, SwivelLok® Multi-Position Male, Liquid Tight Connector,...

Range Of Product-

Discrete Input Number-

Discrete Input Voltage-

Input Voltage Limits-

Discrete Input Voltage Type-

Marking-

Maximum Power Dissipation In W-

ColorBlack

Net Weight-

Discrete Input Current-

M9U31110
1 in stock
M9U31110
Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Range Of Product-

Discrete Input Number-

Discrete Input Voltage-

Input Voltage Limits-

Discrete Input Voltage Type-

Marking-

Maximum Power Dissipation In W-

ColorGray

Net Weight-

Discrete Input Current-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MDI1FRD23A7-N on Powermatic Associates

MDI1FRD23A7-N

Novanta IMS

Novanta IMS MDI1FRD23A7-N is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase DC stepper motor design. It includes a rear control knob and a single motor stack in its Plus version, which encompasses standard features. This part offers a connection through 30cm / 12" bare end flying leads with a 10-pin IDC non-locking connector. It supports RS-422 and RS-485 communication protocols. The supply voltage requirement ranges from 12Vdc to 75Vdc, with optimal performance at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with a 57x57mm flange. The operational ambient air temperature range is from 0 to +85°C. It has an IP20 degree of protection, a moment of inertia of 0.18kg.cm^2, a stall torque of 64N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

TM5SAI2H on Powermatic Associates

TM5SAI2H

Verified stock: 0

Schneider Electric TM5SAI2H is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically as an analog input module. It features a connection type that requires a removable spring terminal block, which is sold separately, and comes in a white color. The unit operates on a supply voltage range of 19-30Vdc, with a nominal voltage of 24Vdc, and is mounted using a symmetrical DIN rail. It is designed to operate within an ambient air temperature range of +32...+131°F / 0...+55°C for horizontal installation, with a derating factor allowing for temperatures up to +140°F / +60°C, and +32...+122°F / 0...+50°C for vertical installation. The TM5SAI2H offers a degree of protection rated at IP20 and has a current consumption of 2mA at 5Vdc via bus and 50mA at 24Vdc for input/output operations. It is equipped with 2 analog inputs that support -10...+10Vdc or 0-20mA signals with a resolution of 15-bit plus sign. The unit's ambient air temperature for storage is specified between -13...+158°F / -25...+70°C, and it can operate in humidity levels of 5-95% without condensation. The power dissipation or losses are calculated at 1.21 W.

Schneider Electric

TM5SDM4DTRFS on Powermatic Associates

TM5SDM4DTRFS

Verified stock: 0

Schneider Electric TM5SDM4DTRFS is a Safety I/O unit within the Modicon TM5 I/O modules sub-range. This unit functions as a Safety DC digital input/output (I/O) module and features a connection type of removable spring terminal block, which is sold separately. It is identifiable by its red color and operates on a supply voltage of 19-30Vdc, with 24Vdc nominal. Designed for symmetrical DIN rail mounting, it offers an IP20 degree of protection. The module includes 2 x digital outputs (24Vdc; NO relay contact outputs) and 2 x digital inputs (24Vdc; Sink), both equipped with short-circuit and overload protection functions. It is suitable for use in environments with an ambient air temperature for storage ranging from -40 to +158°F (-40 to +70°C) and a humidity range of 5-95% without condensation.

Schneider Electric

TM5SDI16D on Powermatic Associates

TM5SDI16D

Verified stock: 0

Schneider Electric TM5SDI16D is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically as a DC digital input module. It features a connection type that requires a removable spring terminal block, which is sold separately, and comes in a white color. The unit operates on a supply voltage of 19-30Vdc, with a nominal voltage of 24Vdc, and is mounted using a symmetrical DIN rail. It is designed to operate within an ambient air temperature range of +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing for operation up to +140°F (+60°C), and for vertical installation, it can operate up to +122°F (+50°C). The TM5SDI16D offers an IP20 degree of protection and consumes 36mA of current at 5Vdc via bus and 61mA at 24Vdc with all inputs ON. It includes 16 digital inputs (24Vdc; Sink), can be stored in environments with temperatures ranging from -40 to +158°F (-40 to +70°C), and tolerates humidity levels of 5-95% without condensation. The power dissipation/losses for this unit are calculated at 1.65 W.

Schneider Electric

TM5SDO4T on Powermatic Associates

TM5SDO4T

Verified stock: 0

Schneider Electric TM5SDO4T is an I/O unit categorized under the Modicon TM5 I/O modules sub-range, designed specifically for DC digital output applications. This unit features a white color and utilizes a removable spring terminal block for connections, which is sold separately. It operates on a supply voltage range of 19-30Vdc, with a nominal voltage of 24Vdc, and can be mounted on a symmetrical DIN rail. The TM5SDO4T is equipped with four digital outputs, each capable of delivering 24Vdc at 500mA (Source). It has a current consumption of 32mA at 5Vdc via bus and 20mA at 24Vdc for input/output operations. The unit offers protection functions including reverse polarity, short-circuit, and overload protection. It operates efficiently within an ambient air temperature range of +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing operation up to +140°F (+60°C), and +14 to +122°F (-10 to +50°C) for vertical installation. The device is designed for storage in environments with temperatures ranging from -40 to +158°F (-40 to +70°C) and humidity levels of 5-95% without condensation. It has a degree of protection of IP20 and a power dissipation/loss of 0.86 W.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric TM5SDI6U is an AC digital input module within the Modicon TM5 I/O modules sub-range. This unit features six digital inputs (100-120Vac; Sink) and utilizes a removable spring terminal block connection type, which is sold separately. It operates on a supply voltage of 85-264Vac (100-240Vac nominal) and is designed for symmetrical DIN rail mounting. The module is gray and has an IP20 degree of protection. It requires a current consumption of 42mA (at 5Vdc via bus) and has a power dissipation/loss of 0.89 W. The operational ambient air temperature ranges from +14 to +131°F (-10 to +55°C) for horizontal installation, with a derating factor allowing up to +140°F (-10 to +60°C), and +14 to +122°F (-10 to +50°C) for vertical installation. For storage, the temperature tolerance spans from -40 to +158°F (-40 to +70°C), and it can withstand humidity levels of 5-95% without condensation.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts