LI150P1-Q17LM1-LIU5X2 Turck Industrial Automation Components

TTR1219RPSD7T-2.0Q5-CTR

Banner

TTR Series 7 Beam Sensor Array 48.0 in Between Frame; Beam Spacing: 162 mm; Standard Gain Range: 120 mm; Output: DO PNP; Input: 18-30 V dc; 2 m (6.5 ft) M12 Male Connector Endcap T: T-slot Mounting

RKV 76-10M

Turck

RKV 76-10M Turck - RKV 76-10M Actuator and Sensor Cordset, Connection Cordset

MDI1PRD17A4-EQ-N

Novanta IMS

Novanta IMS MDI1PRD17A4-EQ-N is a stepper motor designed with integrated drive functionality and a 2-phase DC stepper motor system. It features an external single-end 512-line optical encoder and a rear control knob, categorized under the Plus version with standard features. This model utilizes a non-locking spring-clamp connector and a 10-pin IDC non-locking connector for its connections. It supports RS-422 and RS-485 communication protocols. The supply voltage required for operation ranges from 12Vdc to 48Vdc, with an optimal performance at 24Vdc. It is designed for mounting with a 42x42mm flange. The ambient air temperature suitable for its operation spans from 0 to +85°C. With a degree of protection rated at IP20, it has a moment of inertia of 0.038kg.cm^2 and provides a stall torque of 23N.cm. The resolution is defined by a 1.8° step angle.

130592

Festo

push-in fitting QSM-M3-5/32-I-U-M male thread with internal hexagon socket. Size: Mini, Nominal size: 0,059 ", Type of seal on screw-in stud: Sealing ring, Assembly position: Any, Container size: 1

GSDA RKM 44P-1M

Turck

TL50BLY2R2ALS3C

Banner

Beacon Tower Light: 2-Color Sealed; Loud Pulsed Audible Indicator: Gray housing; Voltage: 12-30 V dc or 24 V ac; Environmental Rating: IP67; Input: Bimodal; Colors: Yellow flash Red flash; 2 m (6.5 ft) Integral Cable

130591

Festo

push-in fitting QSM-M5-1/4-I-U-M male thread with internal hexagon socket. Size: Mini, Nominal size: 0,098 ", Type of seal on screw-in stud: Sealing ring, Assembly position: Any, Container size: 1

WKC 4.5T-1/S1538

Turck

WKC 4.5T-1/S1538 Turck - WKC 4.5T-1/S1538 Actuator and Sensor Cordset, Connection Cordset

TTR1219RPSD7T-2.0Q5-CTR

Banner

TTR Series 7 Beam Sensor Array 48.0 in Between Frame; Beam Spacing: 162 mm; Standard Gain Range: 120 mm; Output: DO PNP; Input: 18-30 V dc; 2 m (6.5 ft) M12 Male Connector Endcap T: T-slot Mounting

RKV 76-10M

Turck

RKV 76-10M Turck - RKV 76-10M Actuator and Sensor Cordset, Connection Cordset

MDI1PRD17A4-EQ-N

Novanta IMS

Novanta IMS MDI1PRD17A4-EQ-N is a stepper motor designed with integrated drive functionality and a 2-phase DC stepper motor system. It features an external single-end 512-line optical encoder and a rear control knob, categorized under the Plus version with standard features. This model utilizes a non-locking spring-clamp connector and a 10-pin IDC non-locking connector for its connections. It supports RS-422 and RS-485 communication protocols. The supply voltage required for operation ranges from 12Vdc to 48Vdc, with an optimal performance at 24Vdc. It is designed for mounting with a 42x42mm flange. The ambient air temperature suitable for its operation spans from 0 to +85°C. With a degree of protection rated at IP20, it has a moment of inertia of 0.038kg.cm^2 and provides a stall torque of 23N.cm. The resolution is defined by a 1.8° step angle.

130592

Festo

push-in fitting QSM-M3-5/32-I-U-M male thread with internal hexagon socket. Size: Mini, Nominal size: 0,059 ", Type of seal on screw-in stud: Sealing ring, Assembly position: Any, Container size: 1