LT50E-Q21R-LI0X3-H1151 Turck Industrial Automation Components

50.12.9.024.5000

Finder

Finder 50.12.9.024.5000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.65A at 110Vdc and 0.2A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a degree of protection for single-phase applications. This relay supports a rated insulation voltage (Ui) of 250Vac and a mounting mode of 6 kV. It utilizes AgNi+Au (Gold plated silver-nickel) technology, indicating the contact material used. The component is designed for PCB mounting, has 2 poles, and does not specify a communication protocol. Its dimensions are tailored for PCB integration, and it boasts a mechanical resistance of 100,000 operations and a power dissipation/losses capacity of 10,000,000 operations.

WK 4.4T-10/S90

Turck

WK 4.4T-10/S90 Turck - WK 4.4T-10/S90 Actuator and Sensor Cordset, Connection Cordset

KADL-25K

Mencom

KADL Cable Entry System Frame, 25 Entries, The grommets (3-16.5mm) ordered separately

BC5-S18-Y1X 10M

Turck

BC5-S18-Y1X 10M Turck - BC5-S18-Y1X 10M Capacitive Sensor

RKC 4.5T-3-RSM 50/S90/S3570

Turck

RKC 4.5T-3-RSM 50/S90/S3570 Turck - RKC 4.5T-3-RSM 50/S90/S3570 Actuator and Sensor Cordset, Extension Cordset

RSM RKM 48A-50M

Turck

VRB-060C-100-K3-14CA11

Nidec

Gearbox

HOM2175SB

Schneider Electric

Square D by Schneider Electric HOM2175SB is a load center designed for use with a secondary surge arrestor. It has a rated current of 5A and operates at a rated voltage of 120Vac/240Vac. This load center is protected by a NEMA 1 enclosure and is suitable for single-phase (1PH) electrical networks.

50.12.9.024.5000

Finder

Finder 50.12.9.024.5000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.65A at 110Vdc and 0.2A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a degree of protection for single-phase applications. This relay supports a rated insulation voltage (Ui) of 250Vac and a mounting mode of 6 kV. It utilizes AgNi+Au (Gold plated silver-nickel) technology, indicating the contact material used. The component is designed for PCB mounting, has 2 poles, and does not specify a communication protocol. Its dimensions are tailored for PCB integration, and it boasts a mechanical resistance of 100,000 operations and a power dissipation/losses capacity of 10,000,000 operations.

WK 4.4T-10/S90

Turck

WK 4.4T-10/S90 Turck - WK 4.4T-10/S90 Actuator and Sensor Cordset, Connection Cordset

KADL-25K

Mencom

KADL Cable Entry System Frame, 25 Entries, The grommets (3-16.5mm) ordered separately

BC5-S18-Y1X 10M

Turck

BC5-S18-Y1X 10M Turck - BC5-S18-Y1X 10M Capacitive Sensor