PS040V-303-LI2UPN8X-H1141/S1802 Turck Industrial Automation Components

Turck PS040V-303-LI2UPN8X-H1141/S1802 is a sensor designed for pressure measurement with programmable instrumentation capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, supporting various measurement units including bar, psi, kPa, MPa, and miscellaneous. The sensor operates within an ambient air temperature range of -40°C to +80°C and has a cylindrical body with a diameter of 34mm. It is pre-equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port. As part of the PS300 series, it offers an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's maximum switching frequency is 180Hz, and it is constructed from 1.4305 (303) stainless steel for both the housing and wetted parts, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It can measure pressure ranges from -1 to +40bar (-14.5 to +580psi) and supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C, and it can operate in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. Protection functions include short-circuit (pulsed) and reverse polarity, with a response time of 50 - 600ms. It features 1 x analog output (0-10Vdc; can be used as a NPN/PNP digital output), with set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, a response time of <3ms, repeatability of ≤0.5% of the measuring range, and zero shift/span shift of ≤0.15% of the measuring range per °C. The control circuit rated current is 200mA, current consumption is 50mA, and it has a time delay feature for both ON-delay and OFF-delay ranging from 0-50.