2216-1201 WAGO Industrial Automation Components

Wago 2216-1201 is a feed-through terminal block designed for efficient wire connection and distribution. It features push-in CAGE CLAMP spring connections for easy wire installation. This terminal block supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 85A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). It is a single-deck terminal with side and center marking slots, equipped with a test port and suitable for Ex e II applications. The terminal block has a net height of 8 kV for impulse voltage, with a rated impulse voltage (Uimp) of 12 mm, and a net width for 1 feed-through pole (1P). It is designed for mounting on DIN-35 rail and comes in gray with an orange actuator. The dimensions are H69.8mm x W12mm x D37.1mm, accommodating wire sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal block has a 16mm2 nominal cross-section for the main feed-through conductor. It is made from Polyamide (PA) 66, features 2-wires (1 push-in + 1 push-in) for connections, and operates at a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II). This product is part of the TOPJOB S series.